Quasi-static and dynamic nanoindentation studies on highly crosslinked ultra-high-molecular-weight polyethylene

Biomaterials

Volumn 25, Issue 12, 2004, Pages 2427-2436

  Park, Kwideok ^a   Mishra, Sanjay ^b   Lewis, Gladius ^a   Losby, Joe ^b   Fan, Zaifeng ^a   Park, Joon B ^c  

^a University of Memphis   (United States)

^b University of Memphis   (United States)

^c IA United States   (United States)

Author keywords

Highly crosslinked ultra high molecular weight polyethylene; Nanoindentation; Stiffness

Indexed keywords

COMPACTION; CROSSLINKING; ELASTIC MODULI; ELECTRON BEAMS; GAMMA RAYS; MOLECULAR WEIGHT; STIFFNESS; TENSILE STRENGTH;

DYNAMIC NANOINDENTATION STUDIES; QUASI-STATIC STUDIES;

POLYETHYLENES;

PEROXIDE; POLYETHYLENE; POLYMER;

ARTICLE; CROSS LINKING; DYNAMICS; ELECTRON BEAM; GAMMA IRRADIATION; MOLECULAR WEIGHT; PRIORITY JOURNAL; YOUNG MODULUS;

EID: 0346499654     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.biomaterials.2003.09.014     Document Type: Article

References (44)

1. Lewis G. Properties of crosslinked ultra-high-molecular-weight polyethylene. Biomaterials. 22:2001;371-401.
2. Turell M, Bellare A, Gomoll A. Fracture toughness of radiation cross-linked ultra-high molecular weight polyethylene. Transactions of the 48th Annual Meeting of the Orthopaedic Research Society, Dallas, TX, USA, February 10-13, 2002. p. 1034.
3. Lewis G. Key issues involved with the use of miniature specimens in the characterization of the mechanical properties of polymeric materials - a review. J Biomed Mater Res (Appl Biomater). 63:2002;455-466.
4. Villarraga M.L., Kurtz S.M., Herr M.P., Edidin A.A. Multiaxial fatigue behavior of conventional and highly crosslinked UHMWPE. J Biomed Mater Res. 66A:2003;298-309.
5. Tang C.Y., Xie X.L., Wu X.C., Li R.K.Y., Mai Y.W. Enhanced wear performance of ultra high molecular weight polyethylene crosslinked by organosilane. J Mater Sci: Mater Med. 13:2002;1065-1069.
6. Asano T, Clarke I, Williams P, Akagi M, Shishido T, Mizoue T. Knee simulator wear of cross-linked UHMWPE with normal and mal-rotation kinetics. Transactions of the 48th Annual Meeting of the Orthopaedic Research Society, Dallas, TX, USA, February 10-13, 2002. p. 0157.
7. Furman B, Agner S, Li B. Is there a difference in wear properties of commercially available crosslinked UHMWPE? Transactions of the 48th Annual Meeting of the Orthopaedic Research Society, Dallas, TX, USA, February 10-13, 2002. p. 1038.
8. Laurent MP, Yao JQ, Bhambri S, Gilbertson LN, Swarts D, Crowninshield RD, Blanchard CR. High cycle wear of highly crosslinked UHMWPE tibial articular surfaces evaluated in a knee simulator. Transactions of the 48th Annual Meeting of the Orthopaedic Research Society, Dallas, TX, USA, February 10-13, 2002. p. 1058.
9. Rho J.Y. Nanoindentation testing of bone. An Y.H., Draughn R.A. Mechanical testing of bone and bone implant interface. 2000;257-269 CRC Press, Boca Raton, FL, USA.
10. Swadener J.G., Rho J.Y., Pharr G.M. Anisotropic effects on elastic moduli measured by nanoindentation in human tibial cortical bone. J Biomed Mater Res. 57:2001;108-112.
11. Hengsberger S., Kulik A., Zysset P. Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions. Bone. 30:2002;178-184.
12. Fan Z., Swadener J.G., Rho J.Y., Roy M.E., Pharr G.M. Effects of viscoelasticity and time-dependent plasticity on nanoindentation measurements of human cortical bone. J Biomed Mater Res. 67A:2003;208-214.
13. Schmidt M, Joy DC, Pharr GM, Swadener JG, Higgins JC. Nanoindentation results from direct molded vs. machined UHMWPE tibial bearings. Transactions of the Sixth World Biomaterials Congress, Kamuela, HI, May 15-20, 2000. p. 1255.
14. Schmidt MA Surface texture and micromechanics of ultra high molecular weight polyethylene (UHMWPE) orthopaedic implant bearings. Ph.D. dissertation, Department of Materials Science and Engineering, The University of Tennessee, Knoxville, TN, USA, 2001.
15. Klapperich C., Komvopoulos K., Pruitt L. Nanomechanical properties of polymers determined from nanoindentation experiments. J Tribol. 123:2001;624-631.
16. Chakravartula AM, Zhou J, Pruitt L, Komvopoulos K. Nanomechanical analysis of surface properties and early wear mechanisms in medical-grade UHMWPE. Transactions of the 29th Annual Meeting of the Society for Biomaterials, Reno, NV, April 30-May 3, 2003. p. 601.
17. Willems G., Celis J.P., Lambrechts P., Braem M., Vanherle G. Hardness and Young's modulus determined by nanoindentation technique of filler particles off dental restorative materials compared with human enamel. J Biomed Med Mater. 27:1993;747-755.
18. Towler M.R., Bushby A.J., Billington R.W., Hill R.G. A preliminary comparison of the mechanical properties of chemically cured and ultrasonically cured glass ionomer cements, using nano-indentation techniques. Biomaterials. 22:2001;1401-1406.
19. Habelitz S., Marshall G.W. Jr., Balouch M., Marshall S.J. Nanoindentation and storage of teeth. J Biomech. 35:2002;995-998.
20. Ebenstein DM, Puttlitz CM, Pruitt L. A novel technique fore measuring murine fracture callus mechanical properties using nanoindentation. Transactions of 28th Annual Meeting of the Society for Biomaterials, Tampa, FL, April 30-May 3, 2003. p. 394.
21. Ebenstein DM, King K, Pruitt LA. A nanoindentation technique for measuring the mechanical properties of finger joint cartilage. Transactions of 29th Annual Meeting of the Society for Biomaterials, Reno, NV, April 30-May 3, 2003. p. 718.
22. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 7:1992;564-1583.
23. Simmons G., Wang H. Single crystal elastic constants and calculated aggregate properties. a handbook:1971;MIT Press, Cambridge, MA, USA.
24. Kurtz S, Giddings V, Muratoglu O, O'Connor D, Harris W, Krevolin J. Stresses in a highly crosslinked acetabular component for total hip replacement, Transactions of the 46th Annual Meeting of the Orthopaedic Research Society, Orlando, FL, USA, March 12-15, 2000. p. 0222.
25. Lewis G., Nyman J.S., Trieu H.H. A methodology for examining the plausibility of accelerated aging protocols for UHMWPE components. Bio-Med Mater Eng. 8:1998;285-298.
26. Ottani S., Porter R.S. Calorimetric investigation on high molecular weight polyethylene reactor powders. J Polym Sci B, Polym Phys. 29:1991;1179-1188.
27. Gilbert J.L., Cumber J., Butterfield A. Surface micromechanics of ultrahigh molecular weight polyethylene. microindentation testing, crosslinking, and material behavior J Biomed Mater Res. 61:2002;270-281.
28. Pharr G.M. Measurement of mechanical properties by ultra-low load indentation. Mater Sci Eng. A253:1998;151-159.
29. VanLandingham MR, Villarrubia JS, Guthrie WF, Meyers GF. Nanoindentation of polymers: an overview. In: Tsukruk VV, Spencer ND, editors. Recent advances in scanning probe microscopy. Proceedings of the 220th American Chemical Society National Meeting, Washington, DC, USA, August 2000. Macromolecular Symposia. Verlag GmbH, Germany: Wiley-VCH, 2001. pp. 15-43.
30. Foot LJ, Willie BM, Bloebaum RD, Hofmann AA. Crystallinity measurements in retrieved crosslinked and conventional polyethylene tibial inserts. Transactions of the 29th Annual Meeting of the Society for Biomaterials, Reno, NV, April 30-May 3, 2003. p. 382.
31. Saikko V., Calonius O., Keranen J. Effect of counterface roughness on the wear of conventional and crosslinked ultrahigh molecular weight polyethylene studied with a multi-directional motion pin-on-disk device. J Biomed Mater Res. 57:2001;506-512.
32. James S.P., Lee K.R., Beauregard G.P., Rentfrow E.D., McLaughlin J.R. Clinical wear of 63 ultrahigh molecular weight polyethylene acetabular components. effect of starting resin and forming method J Biomed Mater Res (Appl Biomater). 48:1999;374-384.
33. Weber A.B., Worland R.L., Keenan J., Van Bowen J. A study of polyethylene and modularity issues in >1000 posterior cruciate-retaining knees at 5-11 years. J Arthroplasty. 17:2002;987-991.
34. Wang A., Essner A., Klein R. Effect of contact stress and wear of ultra-high molecular weight polyethylene in total hip replacement. Proc Inst Mech Eng. 215Part H:2001;133-139.
35. Edidin A., Kurtz S. Functional biomaterials. 2001;Trans Tech Publications, Zurich, Switzerland.
36. Courtney T.H. Mechanical behavior of materials. 1990;McGraw-Hill Publishing Co, New York.
37. Edidin A, Hozack W, Villarraga ML, Ciccarelli L, Kurtz SM. Evaluation of wear in short term implanted highly crosslinked UHMWPE inserts. Transactions of the 48th Annual Meeting of the Society for Biomaterials, Tampa, FL, April 24-27, 2002. p. 27.
38. Muratoglu OK, Greenbaum E, Larson S, Freiberg AA, Burke D, Harris WH. Surface analysis of early retrieved acetabular polyethylene liners: a comparison of standard and highly crosslinked polyethylenes. Transactions of the 48th Annual Meeting of the Orthopaedic Research Society, Dallas, TX, USA, February 10-13, 2002. p. 1029.
39. Shishido T, Clarke IC, Weber F, Shoji H, Imakiire A. Analysis of retrieved THR cups of highly cross-linked UHMWPEE from South Africa. Transactions of the 48th Annual Meeting of the Orthopaedic Research Society, Dallas, TX, USA, February 10-13, 2002. p. 1032.
40. Willie BM, Foot LJ, Le D, Bloebaum RD, Hofmann AA. Assessment of oxidative resistance using FTIR in a series of thirty retrieved Durasul crosslinked acetabular liners. Transactions of the 28th Annual Meeting of the Society for Biomaterials, Tampa, FL, April 24-27, 2002. p. 608.
41. Willie BM, Le D, Bloebaum RD, Hofmann AA. Determination of in vivo oxidative resistance by density measurement in a series of retrieved Durasul crosslinked acetabular liners. Transactions of the 28th Annual Meeting of the Society for Biomaterials, Tampa, FL, April 24-27, 2002. p. 610.
42. Kurtz SM, Hozack WJ, Turner J, Marcolongo M, Edidin AA, Klimkash M. In vivo degradation of ultra-high-molecular-weight polyethylene acetabular liners following implantation. Proceedings of the 70th Annual Meeting of the American Academy of Orthopaedic Surgeons, New Orleans, LA, USA, February 5-9, 2003. p. 360.
43. Schneider W, Abt NA, Kottig P. Analysis of early retrieved acetabular cups of highly crosslinked polyethylene. Transactions of the 49th Annual Meeting of the Orthopaedic Research Society, New Orleans, LA, USA, February 2-5, 2003. p. 1416.
44. Simis KS, Chawan AD, Hedrick T, Ries M, Pruitt L. Comprehensive assessment of surface damage on early retrieved highly crosslinked UHMWPE acetabular liners. Transactions of the 49th Annual Meeting of the Orthopaedic Research Society, New Orleans, LA, USA, February 2-5, 2003. p. 1417.