Local and global fracture toughness of a flame sprayed molybdenum coating

Journal of Thermal Spray Technology

Volumn 12, Issue 4, 2003, Pages 560-571

  Brantner, H P ^a   Pippan, R ^a   Prantl, W ^b  

^a Erich Schmid Institute of Materials Science   (Austria)

^b UNIVERSITY OF LEOBEN   (Austria)

Author keywords

Flame spray; Fracture toughness; Microstructure; Mismatch; Molybdenum

Indexed keywords

CHARACTERIZATION; ELASTIC MODULI; FLAME SPRAYING; FRACTURE MECHANICS; FRACTURE TOUGHNESS; MICROSTRUCTURE; MOLYBDENUM; SCANNING ELECTRON MICROSCOPY;

FLAME SPRAYED MOLYBDENUM COATING; FRACTURE MECHANICAL CHARACTERIZATION; GLOBAL FRACTURE TOUGHNESS; LOCAL FRACTURE TOUGHNESS; NANOINDENTATION METHODS;

SPRAYED COATINGS;

EID: 0346306243     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1361/105996303772082314     Document Type: Article

References (36)

1. R.B. Heimann: Plasma-Spray Coating, Wiley/VCH, Weinheim, Germany, 1996.
2. J.M. Tura, A. Traveria, M.D. Castellar, J. Pujada, J. Blouet, R. Gras, H.G. Magham, P. Belair, T. Hanau, A. Romero: "Frictional Properties and Wear of a Molybdenum Coating and a Bronze (Cu-10%Sn) With Friction Modifier Fillers," Wear, 1995, 189, pp. 70-76.
3. S. Sampath, S. Usmani, and D.L. Houck: "Applications of Mo and Mo-Alloys as Thermal Spray Coatings, Molybdenum and Molybdenum Alloys," TMS Annual Meeting, A. Crowson, E.S. Chen, J.A. Shields and P.R. Subramanian, ed., TMS, Warrendale, 1998, pp. 145-54.
4. P.J. Callus and C.C. Berndt: "Relationship Between the Mode II Fracture Toughness and Microstructure of Thermal Spray Coatings," Surf. Coat. Technol., 1999, 114, pp. 114-28.
5. Anon: Stress Intensity Factors Handbook, Y. Murakami, ed., Pergamon Press, Oxford, 1992.
6. S. Scherer, M. Gruber, J. Stampfl, and O. Kolednik: "Automatische 3D-Oberflächenrekonstruktion aus Stereoskopischen Rasterelektronenmikroskop-Aufnahmen," 1. Tagung des DVM-Arbeitskreises Mikrosystemtechnik, Micro Mat 95, Berlin, Germany, B. Michel and T. Winkler, ed., 1995, pp. 671-76 (in German).
7. J. Stampfl, Ch.O.A. Semprimoschnig, and O. Kolednik: "Topometrie Metallischer Bruchoberflächen," 17. Tagung des DVM-Arbeitskreises Rastermikroskopie in der Materialprüfung, Berlin, Germany, H. Vetters, ed., Halle/Saale, 1996, pp. 179-84 (in German).
8. J. Matejicek and S. Sampath: "Intrinsic Residual Stresses in Single Splats Produced by Thermal Spray Process," Acta Mater., 2001, 49, pp. 1993-99.
9. I. Sevostianov and M. Kachanov: "Modelling of Anisotropic Elastic Properties of Plasma-Sprayed Coatings in Relation to Their Microstructure," Acta Mater., 2000, 48, pp. 1361-70.
10. S.H. Leigh and C.C. Berndt: "Modelling of Elastic Constants of Plasma Spray Deposits With Ellipsoid-Shaped Voids," Acta Mater., 1999, 47, pp. 1575-86.
11. R.J. Damani and A. Wanner, "Microstructure and Elastic Properties of Plasma-Sprayed Alumina," J. Mater. Sci., 2000, 35, pp. 4307-18.
12. O. Kesler, J. Matejicek, S. Sampath, S. Suresh, T. Gnaeupel-Herold, P.C. Brand, and H.J. Prask: "Measurement of Residual Stress in Plasma-Sprayed Metallic, Ceramic and Composite Coatings," Mater. Sci. Eng., 1998, A257, pp. 215-24.
13. X. Jiang, S. Sampath, and H. Herman: "Grain Morphology of Molybdenum Splats Plasma-Sprayed on Glass Substrates," Mater. Sci. Eng., 2001, A299, pp. 235-40.
14. C.B. Ponton and R.D. Rawlings: "Vickers Indentation Fracture Toughness Test, Part 1. Review of Literature and Formulation of Standardized Indentation Toughness Equations," Mater. Sci. Technol., 1989, 5, pp. 865-72.
15. C.B. Ponton and R.D. Rawlings: "Vickers Indentation Fracture Toughness Test, Part 2. Application and Critical Evaluation of Standardized Indentation Toughness Equations," Mater. Sci. Technol., 1989, 5, pp. 961-76.
16. T. Lube: "Indentation Crack Profiles in Silicon Nitride," J. Eur. Ceram. Soc., 2001, 21, pp. 211-18.
17. K.K. Sharma, P.N. Kotru, R.N. Tandon, and B.M. Wanklyn: "Hardness and Dielectric Characteristics of Flux Grow Terbium Aluminate Crystals," Mater. Sci. Eng., 1999, B57, pp. 197-208.
18. IC of Brittle Solids by the Indentation Method With Low Crack-to-Indent Ratios," J. Mater. Sci. Lett., 1982, 1, pp. 13-16.
19. D.K. Shetty, I.G. Wright, P.N. Mincer, and A.H. Clauer: "Indentation Fracture of WC-Co Cermets," J. Mater. Sci., 1985, 20, pp. 1873-82.
20. ASTM Standard E399-90: Standard Test Method for Plain-Strain Fracture Toughness of Metallic Materials, American Society for Testing and Materials, Philadelphia, PA, 1993.
21. R.J. Damani, Ch. Schuster, and R. Danzer: "Polished Notch Modification of SENB-S Fracture Toughness Testing," J. Eur. Ceram. Soc., 1997, 17, pp. 1685-89.
22. T.S. Cook, and F. Erdogan: "Stresses in Bonded Material With a Crack Perpendicular to the Interface," Int. J. Eng. Sci., 1972, 10, pp. 677-97.
23. F. Erdogan, and V. Biricikoglu: "Two Bonded Half Planes With a Crack Going Through the Interface," Int. J. Engng. Sci., 1973, 11, pp. 745-66.
24. R.O. Ritchie, R.M. Cannon, B.J. Dalgleish, R.H. Dauskardt, and J.M. McNaney: "Mechanics and Mechanisms of Crack Growth at or Near Ceramic-Metal Interfaces: Interface Engineering Strategies for Promoting Toughness," Mater. Sci. Eng., 1993, A166, pp. 221-35.
25. A.G. Evans, M. Rühle, B.J. Dalgleish, and P.G. Charalambides: "The Fracture Energy of Bimaterial Interfaces," Mater. Sci. Eng., 1990, A126, pp. 53-64.
26. Y. Sugimura, P.G. Lim, C.F. Shih, and S. Suresh: "Fracture Normal to a Bimaterial Interface: Effect of Plasticity on Crack-Tipp. Shielding and Amplification," Acta Mater., 1995, 43(4), pp. 1157-69.
27. R. Pippan, and F.O. Riemelmoser: "Fatigue of Bimaterials: Investigation of the Plastic Mismatch in Case of Cracks Perpendicular to the Interface," Comp. Mat. Sci., 1998, 13, pp. 108-16.
28. R. Pippan, K. Flechsig, and F.O. Riemelmoser: "Fatigue Crack Propagation Behavior in the Vicinity of an Interface Between Materials With Different Yield Stresses," Mater. Sci. Eng., 2000, A283, pp. 225-33.
29. R. Pippan, K. Flechsig, F.O. Riemelmoser, and H.P. Brantner: "Fatigue Crack Propagation Perpendicular to an Interface: The Effect of Plastic Mismatch," 13th European Conference on Fracture, M. Fuentes, M. Elices, A. Martin-Meizos, and J.&M. Martinez-Esnaola, Elsevier, Surrey, UK, 2000, 85cl.pdf (CD).
30. I. Iordanova and K.S. Forcey: "Texture and Residual Stresses in Thermally Sprayed Coatings," Surf. Coat. Technol., 91, pp. 174-82.
31. J. Matejicek, S. Sampath, P.C. Brand, and H.J. Prask: "Quenching, Thermal and Residual Stress in Plasma Sprayed Deposits," Acta Mater., 1999, 47(2), pp. 607-17.
32. H.P. Brantner, R. Pippan, W. Prantl, S. Bertini, and O. Lacroix: "Bruchverhalten Flammgespritzter Molybdänschichten," 33. Tagung DVM-Arbeitskreis Bruchvorgänge, H.A. Richard, ed., Paderborn, Germany, 2001, pp. 133-42 (in German).
33. K-H. Schwalbe, Bruchmechanik metallischer Werkstoffe, Hanser, München Wien, 1980 (in German).
34. H.P. Brantner, R. Pippan, W. Prantl, S. Bertini, and O. Lacroix: "Fracture Mechanical Behavior of PLASMA-Sprayed Coatings," 13th European Conference on Fracture, M. Fuentes, M. Elices, A. Martin-Meizos, and J.&M. Martinez-Esnaola, ed., Elsevier, Surrey, UK, 2000, 61cl.pdf (CD).
35. J.W. Hutchinson: "Crack Tip: Shielding by Micro-Cracking in Brittle Solids," Acta Mater., 1987, 35(7), pp. 1605-19.
36. L.S. Sigl: "Microcrack Toughening in Brittle Materials Containing Weak and Strong Interfaces," Acta Mater., 1996, 44(9), pp. 3599-609.