Aerodynamic and mass transfer characteristics of an annular bistable impinging jet with a fluidic flip-flop control

International Journal of Heat and Mass Transfer

Volumn 46, Issue 7, 2003, Pages 1265-1278

  Trávníček, Zdeněk ^a   Peszyński, Kazimierz ^b   Hošek, Jan ^a   Wawrzyniak, Sylwester ^b  

^a INSTITUTE OF THERMOMECHANICS   (Czech Republic)

^b UNIVERSITY OF TECHNOLOGY AND LIFE SCIENCES   (Poland)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; FLOW VISUALIZATION; HYSTERESIS; MASS TRANSFER; NOZZLES;

AIR JETS;

AERODYNAMICS;

AERODYNAMICS; FLOW CONTROL; FLUIDICS; JET IMPINGEMENT; MASS TRANSFER; NOZZLE FLOW;

EID: 0346037082     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0017-9310(02)00381-2     Document Type: Article

References (32)

1. E.P. Dyban, A.I. Mazur, Convection Heat Transfer in Impinging Jets (Konvektivnyj teploobmen pri strujnom obtekanii tel), first ed., Naukova dumka, Kiev, 1982 (in Russian).
2. H. Martin, Heat and mass transfer between impinging gas jets and solid surfaces, Adv. Heat Transfer 13 (1977) 1-60.
3. S.J. Downs, E.H. James, Jet impingement heat transfer-a literature survey, in: Proceedings of the National Heat Transfer Conference, ASME, Pennsylvania, PA, 1987, 87-HT-35.
4. K. Jambunathan, E. Lai, M.A. Moss, B.L. Button, A review of heat transfer data for single circular jet impingement, Int. J. Heat Fluid Flow 13 (2) (1992) 106-115.
5. R. Viskanta, Heat transfer to impinging isothermal gas and flame jets, Exp. Thermal Fluid Sci. 6 (1993) 111-134.
6. S. Polat, Heat and mass transfer in impinging drying, Drying Technol. 11 (6) (1993) 1147-1176.
7. B.W. Webb, C.-F. Ma, Single-phase liquid jet impingement heat transfer, Adv. Heat Transfer 26 (1995) 105-107.
8. S.V. Garimella, Heat transfer and flow fields in confined jet impingement, Ann. Rev. Heat Transfer XI (2000) 413-494.
9. A.S. Fleischer, K. Kramer, R.J. Goldstein, Dynamics of the vortex structure of a jet impinging on a convex surface, Exp. Thermal Fluid Sci. 24 (2001) 169-175.
10. R.J. Goldstein, E.R.G. Eckert, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, A. Bar-Cohen, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S. Garrick, Heat transfer-a review of literature, Int. J. Heat Mass Transfer 45 (14) (2002) 2853-2957.
11. C. Herman, The impact of flow oscillations on convective heat transfer, Ann. Rev. Heat Transfer XI (2000) 495-562.
12. V. Narayanan, J.S. Yagoobi, R.H. Page, Heat transfer characteristic of a slot jet reattachment nozzle, Trans. ASME J. Heat Transfer 120 (1998) 348-356.
13. Y. Kokoshima, A. Shimizu, T. Murao, Numerical analysis of annular turbulent jet impinging on a flat plate, in: Proceedings of the 3rd Triennial International Symposium on Fluid Control, Measurement, and Visualization, FLUCOME '91, ASME, San Francisco, 1991, pp. 205-210.
14. H. Maki, A. Yabe, Unsteady characteristics of the annular impinging jet flow field and reverse stagnation point heat transfer, in: Proceedings of the National Heat Transfer Conference Heat Transfer in Convective Flows, Philadelphia, PA, 1989, HTD-vol. 107, pp. 163-168.
15. Z. Trávníček, F. Křížek, Impinging jet and combined slot nozzle (Impaktströmung und die Zusammengesetzte Schlitzdüse), Heat Mass Transfer 35 (5) (1999) 351-356 (in German).
16. Z. Trávníček, F. Maršík, Flow visualization and mass transfer with a bistable two-slot impinging jet, in: Proceedings of the 10th International Symposium of the Flow Visualization (ISFV 10), Kyoto, 2002, Book of Abstracts p. 44; Full text CD-ROM, F0068.
17. V. Tesař, M. Jílek, Z. Randa, Topology changes in an annular impinging jet flow, in: Proceedings of the Topical Problems in Fluid Mechanics 2001, Institute of Thermomechanics CAS, Prague, 2001, pp. 121-124.
18. V. Tesař, Microfluidics for MEMS-microfluidic valve, in: F.B. Hsiao (Ed.), Proceedings of the 4th Pacific International Conference on Aerospace Science and Technology, Kaohsiung, Taiwan ROC, 2001, pp. 301-305.
19. J.F. Federspiel, L.S. Bangert, D.J. Wing, T. Hawkes, Fluidic control of nozzle flow-some performance measurements, in: Proceedings of the 31st AIAA/ASME/SAE/ASEE Joint Propulsion Conference, San Diego, CA, 1995, AIAA Paper No. 95-2605.
20. H. Viets, Flip-flop jet nozzle, AIAA J. 13 (10) (1975) 1375-1379.
21. G. Raman, E.J. Rice, D.M. Cornelius, Evaluation of flip-flop jet nozzles for use as practical excitation devices, Trans. ASME, J. Fluids Eng. 116 (1994) 508-515.
22. J. Mi, G.J. Nathan, New flip-flop jet nozzle without control port and feedback loop, in: E. Lindborg et al. (Eds.), Proceedings of the 2nd Int. Symposium Turbulence and Shear Flow Phenomena (TSFP-2), Stockholm, vol. II, 2001, pp. 253-257.
23. F. Herr, C. Camci, Self-oscillating-impinging-jet as a gas turbine cooling enhancement system, in: Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition, ASME, Orlando, FL, 1997.
24. K. Peszyński, Flow control by axisymmetric fluidic device with radial switching, in: Proceedings of the Engineering Mechanics '98, Czech Academy of Sciences, Svratka, Czech Republic, 1998, pp. 583-588.
25. K. Peszyński, J. Hošek, Z. Kuszyński, Z. Trávníček, S. Wawrzyniak, Active control of annular bistable jet, in: Proceedings of the Engineering Mechanics 2000, Czech Academy of Sciences, Svratka, Czech Republic, 2000, vol. IV, pp. 149-154.
26. K. Peszyński, Z. Trávníček, Jet flow visualization for an axi-symmetric nozzle, in: J. Sempruch (Ed.), Development in Control and Machinery Design, Wydawnictwa Uczelniane Akademii Techniczno-Rolniczej, Bydgoszcz, 2002, pp. 55-64.
27. T. Corke, D. Koga, R. Drubka, H. Nagib, A new technique for introducing controlled sheets of smoke streaklines in wind tunnels, in: Proceedings of the 7th International Congress on Instrumentation in Aerospace Simulation Facilities (ICIASF '77), IEEE Publication 77CH 1251-8 AES, Royal Military College of Science, Shrivenha, 1977, pp. 74-80.
28. R.J. Goldstein, H.H. Cho, A review of mass transfer measurements using naphthalene sublimation, Exp. Thermal Fluid Sci. 10 (1995) 416-434.
29. M. Korger, F. Křížek, Mass-transfer coefficient in impingement flow slotted nozzles, Int. J. Heat Mass Transfer 9 (5) (1966) 337-344.
30. S.J. Kline, F.A. McClintock, Describing uncertainties in single-sample experiments, Mech. Eng. 75 (1953) 3-8.
31. FLUENT User's Guide, Release 5.5.14. FLUENT Inc., Lebanon, 1998.
32. S.V. Patankar, Numerical Heat Transfer and Fluid Flow, Hemisphere, Washington, DC, 1980.