HEAT TRANSFER AND FLOW FIELDS IN CONFINED JET IMPINGEMENT

Annual Review of Heat Transfer

Volumn 11, Issue , 2000, Pages 413-494

  Garimella, Suresh V ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

FLOW FIELDS; JETS; REYNOLDS NUMBER; TURBULENCE;

CONFINED JETS; EXIT VELOCITY PROFILE; GOVERNING PARAMETERS; HEAT TRANSFER AND FLOWS; JET DIAMETER; JET IMPINGEMENT; PROFILE LEVELS; REYNOLDS NUMBER JET; SEPARATION DISTANCES; TURBULENCE LEVEL;

HEAT TRANSFER;

EID: 0001272344     PISSN: 10490787     EISSN: 23750294     Source Type: Book Series    
DOI: 10.1615/AnnualRevHeatTransfer.v11.90     Document Type: Chapter

References (122)

1. S. J. Downs and E. H. James, Jet Impingement Heat Transfer—A Literature Survey, A S M E Paper No. 87-HT-35, 1987.
2. J. H. Lienhard, Liquid Jet Impingement, Chap. 4, Ann. Rev. Heat Transfer, Vol. 6, pp. 199-270, 1995.
3. H. Martin, Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces, Adv. Heat Transfer, Vol. 13, pp. 1-60, 1977.
4. N. T. Obot, A. S. Mujumdar, and W. J. M. Douglas, Design Correlations for Heat and Mass Transfer under Various Turbulent Impinging Jet Configurations, Drying, pp. 388-402, 1980.
5. B. W. Webb and C.-F. Ma, Single-Phase Liquid Jet Impingement Heat Transfer, Adv. Heat Transfer, Vol. 26, pp. 105-217, 1995.
6. N. T. Obot, W. J. M. Douglas, and A. S. Mujumdar, Effect of Semi-confinement on Impingement Heat Transfer, Proc. 7th Int. Heat Transfer Conf, Vol. 3, pp. 395-400, 1982.
7. S. V. Garimella, Enhanced Air Cooling of Electronic Equipment, in Air Cooling Technology for Electronic Equipment, Chap. 6, S. J. K i m and S. W. Lee (eds.) C R C Press, Boca Raton, F I ., 1996.
8. J. A. Fitzgerald and S. V. Garimella, Visualization of the Flow Field in a Confined and Submerged Impinging Jet, Proc. ASME Nat. Heat Transfer Conf, Baltimore, MD, ASME HTD-Vol. 346(8), pp. 93-99, 1997.
9. M. D. Dcshpandc and R. N. Vaishnav, Submerged Laminar Jet Impingement on a Plane, J. Fluid Mechanics, Vol. 114, pp. 213-236, 1982.
10. S. J. Lee, J. H. Lee, D. Lee, and R. Greif, Heat Transfer from a Plate to a Fully Developed Axisymmelric Impinging Jet, ASME Enhanced Cooling Techniques for Electronics Applications, Vol. 263, pp. 11-18, 1993.
11. X. Yan, J. W. Baughn, and M. Mesbah, The Effect of Reynolds Number on the Heat Transfer from a Flat Plate to an Impinging Jet, Fund. Appi. Heat Transfer Res. Gas Turbine Engines, Vol. 226, pp. 1-7, 1992.
12. S. V. Garimella and R. A. Rice, Confined and Submerged Liquid Jet Impingement Heat Transfer, J. Heat Transfer, Vol. 117, pp. 871-877, 1995.
13. B. R. Hollworlh and S. 1. Wilson, Enlrainment Effects on Impingement Heal Transfer: Part I. Measurements of Heated Jet Velocity and Temperature Distributions and Recovery Temperatures on Target Surface, J. Heat Transfer, Vol. 106, pp. 797-803, 1984.
14. P. Hrycak, D. T. Lee, J. W. Gauntner, and J. N. B. Livingood, Experimental Flow Characteristics of a Single Turbulent Jet Impinging on a Flat Plate, NASA TN D-5690, pp. 1-32, 1970.
15. C. T. Chang, G. Kocamustafaogullari, F. Landis, and S. Downing, Single and Multiple Liquid Jet-Impingement Heat Transfer, Heat Transfer in Turbulent Flows, ASME HTD-Vol. 246, pp. 43-52, 1993.
16. C. den Ouden and C. J. Hoogendoorn, Local Convective Heat Transfer Coefficient for Jets Impinging on a Plate: Experiments Using a Liquid Crystal Technique, Procs. 5th Int. Heat Transfer Conf, Vol. 5, pp. 293-297, 1974.
17. H. Sun, C. F. Ma, and W. Nakayama, Local Characteristics of Convective Heal Transfer from Simulated Microelectronic Chips to Impinging Submerged Round Water Jets, J. Electronic Packaging, Vol. 115, pp. 71-77, 1993.
18. D. J. Womac, S. Ramadhyani, and F. P. Incropcra, Correlating Equations for Impingement Cooling of Small Heat Sources with Single Circular Liquid Jets, J. Heat Transfer, Vol. 115, pp. 106-115, 1993.
19. R. Gardon and J. C. Akfirat, The Role of Turbulence in Determining the Heat Transfer Characlerislics of Impinging Jets, Int. J. Heat Mass Transfer, Vol. 8, pp. 1261-1272, 1965.
20. C. O. Popiel and O. Trass, Visualization of a Free and Impinging Round Jet, Exp. Thermal Fluid Sci., Vol. 4, pp. 253-264, 1991.
21. D. R. H. Gillespie, S. M. Guo, Z. Wang, and P. T. Ireland, A Comparison oí Full Surface Local Heat Transfer Coefficient and Flow Field Studies beneath Sharp-Edged and Radiused Entry Impinging Jets, Paper 96-GT-428, Int. Gas Turbine and Aeroengine Congress and Exhibition, June 10-13, Birmingham, UK, 1996.
22. D. Schäfer, F. P. Incropera, and S. Ramadhyani, Planar Liquid Jet Impingement Cooling of Multiple Discrete Heat Sources, J. Electronic Packaging, Vol. 113, pp. 359-366, 1991.
23. S. V. Garimella and B. Nenaydykh, Nozzle-Geometry Effects in Liquid Jet Impingement Heat Transfer, Int. J. Heat Mass Transfer, Vol. 39, pp. 2915-2923, 1996.
24. G. K. Morris and S. V. Garimella, Orifice and Impingement Flow Fields in Confined Jet Impingement, J. Electronic Packaging, Vol. 120, pp. 68-72, 1998.
25. G. K. Morris, S. V. Garimella, and J. A. Fitzgerald, Improved Predictions of the Flow Field in Submerged and Confined Impinging Jets Using the Reynolds Stress Model, Intersoc. Conf. Thermal Phenomena in Electronic Systems (ITHERM '98), Seattle, WA, pp. 362-370, 1998.
26. S. Ashforth-Frost and K. Jambunathan, Effect of Nozzle Geometry and Semi-Confinement on the Potential Core of a Turbulent Axisymmetric Free Jet, Int. Comm. Heat Mass Transfer, Vol. 23, pp. 152-162, 1996.
27. R. G. Olsson and E. T. Turkdogan, Radial Spread of a Liquid Stream on a Horizontal Plate, Nature, Vol. 211, pp. 813-816, 1966.
28. K. Kataoka, I. Mihata, K. Maruo, M. Suguro, and T. Chigusa, Quasi-periodic Largc-Scale Structure Responsible for the Selective Enhancement of Impinging Jel Heal Transfer, Proc. 8th Int. Heat Transfer Conf, Vol. 3., pp. 1193-1198, 1986.
29. C.-M. Ho and N. S. Nosseir, Dynamics of an Impinging Jet: Pari I. The Feedback Phenomenon,/ Fluid Mech., Vol. 105, pp. 119-142, 1981.
30. H. H. Bruun, A Time-Domain Analysis of the Large-Scale Flow Structure in a Circular Jet. Part I. Moderate Reynolds Number, J. Fluid Mech., Vol. 83, pt. 4, pp. 641-671, 1977.
31. N. Didden and C.-M. Ho, Unsteady Separation in a Boundary Layer Produced by an Impinging Jet, J. Fluid Mech., Vol. 160, pp. 235-256, 1985.
32. S. V. Garimella, Flow Visualization Melhods and Their Application in Electronic Systems, K. Azar (ed.), in Thermal Measurements in Electronics Cooling, C R C Press, Boca Ralon, F L, 1997.
33. C. F. Ma and A. E. Bcrglcs, Convcctivc Heat Transfer on a Small Vertical Heated Surface to an Impinging Circular Liquid Jet, B. X. Wang (ed.), in Heat Transfer Science and Technology, Hemisphere, Washington, DC, pp. 193-200, 1990.
34. C. F. Ma, H. Sun, H. Auracher, and T. Gomi, Local Convective Heat Transfer from Vertical Heated Surfaces to Impinging Circular Jets, Proc. 9th Int. Heat Transfer Conf, Hemisphere, Washington, DC, Vol. 2, pp. 441-446, 1990.
35. J. W. Baughn, A. E. Hechanova, and X. Yan, An Experimenlal Study of Enlrainmeni Effects on the Heat Transfer from a Flat Surface to a Heated Circular Impinging Jet, ASME/JSME Thermal Engineering Pmc, Vol. 3, pp. 143-149, 1991.
36. R. J. Goldstein, A. I. Bchbahani, and K. Kicgcr Hcppclmann, Strcamwisc Distribulion of the Recovery Factor and ihe Local Heal Transfer Coefficieni lo an Impinging Circular Air Jet, Int. J. Heat Mass Transfer, Vol. 29, pp. 1227-1235, 1986.
37. B. R. Hollworth and L. R. Gero, Entrainment Effects on Impingement Heat Transfer: Part I I. Local Heat Transfer Measurements, J. Heat Transfer, Vol. 107, pp. 910-915, 1985.
38. A. K. Mohanty and A. A. Tawfek, Heat Transfer Due to a Round Jet Impinging Normal to a Flal Surface, Int. J. Heat Mass Transfer, Vol. 36, pp. 1639-1647. 1993.
39. N. T. Oboi, A. S. Majumdar, and W. J. M. Douglas, The Effect of Nozzle Geomelry on Impingement Heat Transfer under a Round Turbulent Jet, A S M E Winter Annual Meeiing, New York, Paper # 79-WA/HT-53, 1979.
40. V. P. Schrocdcr and S. V. Garimella, Heat Transfer from a Discrete Heat Source in Confined Air Jel Impingemeni, Heat Transfer 1998, Vol. 5, pp. 451-456, 1998.
41. J. Stevens and B.W. Webb, Measurements of the Flow Structure in the Radial Layer of Impinging Free-Surface Liquid Jets, Int. J. Heat Mass Transfer, Vol. 36, pp. 3751-3758, 1993.
42. E.U. Schlünder and V. Gnielinski, Chem.-Ing.-Tech. Vol. 39, p. 578, 1967.
43. S. Ashforth-Frost, K. Jambunathan, and C. F. Whitney, Velocity and Turbulence Characteristics of a Semiconfined Orthogonally Impinging Slot Jet, Exp. Thermal Fluid Sci. Vol. 14, pp. 60-67, 1997.
44. J. A. Fitzgerald and S. V. Garimella, Flow Field Effects on Heat Transfer in Confined Jet Impingemeni, J. Heat Transfer, Vol. 119, pp. 630-632, 1997.
45. J. A. Fitzgerald and S. V. Garimella, A Study of the Flow Field of a Confined and Submerged Impinging Jet, Int. J. Heat Mass Transfer, Vol. 41, pp. 1025-1034, 1998.
46. D. Lytle and B. W. Webb, Air Jet Impingement Heat Transfer at Low Nozzle-Plate Spacings, Int. J. Heat Mass Transfer, Vol. 37, pp. 1687-1697, 1994.
47. R. A. Rice and S. V. Garimella, Heat Transfer from Discrete Heat Sources Using an Axisymmetric, Submerged and Confined Liquid Jet, Heat Transfer '94, Vol. 3, pp. 89-94, 1994.
48. A. M. Huber and R. Viskanta, Effect of Jet-Jet Spacing on Convective Heat Transfer to Confined, Impinging Arrays of Axisymmetric Air Jets, Int. J. Heat Mass Transfer, Vol. 37, pp. 2859-2869, 1994.
49. A. M. Huber and R. Viskanta, Convective Heat Transfer to a Confined Impinging Array of Air Jets with Spent Air E x i t s, / Heat Transfer, Vol. 116. pp. 570-576,1994.
50. Y - J. San, C. H. Huang, and M.-H. Shu, Impingement Cooling of a Confined Circular Air Jet, Int. J. Heat Mass Transfer, Vol. 40, pp. 1355-1364, 1997.
51. C.-Y. Li and S. V. Garimella, Fluid-Property Effects in Confined and Submerged Jet Impingement, Int. J. Heat Mass Transfer (in review).
52. L. W. Florschuetz, C. R. Truman, and D. E. Metzger, Streamwise Flow and Heat Transfer Distributions for Jet Array Impingement with Crossflow, J. Heat Transfer, Vol. 103, pp. 337-342, 1981.
53. R. J. Goldstein and A. 1. Behbahani, Impingement of a Circular Jet with and without Cross Flow, Int. J. Heat Mass Transfer, Vol. 25, pp. 1377-1382, 1982.
54. R. J. Goldstein, K. A. Sobolik, and W. S. Seol, Effect of Entrainment on the Heat Transfer to a Heated Circular Air Jet Impinging on a Flat Surface, J. Heat Transfer, Vol. 112, pp. 608-611, 1990.
55. Y. Pan and B. W. Webb, Heat Transfer Characteristics of Arrays of Free-Surface Liquid Jets, General Papers in Heat and Mass Transfer, Insulation, and Turbomachinery, ASME HTD-Vol. 271, pp. 23-28, 1994.
56. N. T. Obot and T. A. Trabold, Impingement Heat Transfer within Arrays of Circular Jets: Part I. Effects of Minimum, Intermediate, and Complete Crossflow for Small and Large Spacings, J. Heat Transfer, Vol. 109, pp. 872-879, 1987.
57. G. L. Whidden, J. Stevens, and B. W. Webb, Heat Transfer and Flow Characteristics of Two-Dimensional Jets Impinging on Heated Protrusions with Crossflow of the Spent Air, J. Electronic Packaging, Vol. 114, pp. 81-87, 1992.
58. L. M. Jiji and Z. Dagan, Experimental Investigation of Single Phase Multi-Jet Impingement Cooling of an Array of Microelectronic Heat Sources, Prot: Int. Symp. Cooling Tech. Electron. Equip., Honolulu, pp. 265-283, 1987.
59. V. P. Schroeder and S. V. Garimella, Heat Transfer in the Confined Impingement of Multiple Air Jets, Proc. ASME Heat Transfer Division (IMECE, Anaheim, CA), HTD-Vol. 361-1, pp. 183-190, 1998.
60. A. I. Behbahani and R. J. Goldstein, Local Heat Transfer to Staggered Arrays of Impinging Circular Air Jets, J. Engineeringfor Power, Vol. 105,pp. 354-360, 1983.
61. S. A. Slriegl and T. E. Diller, The Effect of Entrainment Temperature on Jet Impingement Heat Transfer, J. Heat Transfer, Vol. 106, pp. 27-33, 1984.
62. R. J. Goldstein and J. F. Timmers, Visualization of Heat Transfer from Arrays of Impinging Jets, Int. J. Heat Mass Transfer, Vol. 25, pp. 1857-1868, 1982.
63. R. Gardon and J. Cobonpue, Heat Transfer between a Flat Plate and Jets of Air Impinging on It, Int. Dev. Heat Mass Transfer, Proc. 2nd Int. Heat Transfer Conf, pp. 454-460, 1962.
64. S. J. Slayzak, R. Viskanta, and F. P. Incropera, Effects of Interactions between Adjoining Rows of Circular, Free-Surface Jets on Local Heat Transfer from the Impingement Surface, J. Heat Transfer, Vol. 116, pp. 88-95, 1994.
65. B. R. Hollworth and L. Dagan, Arrays of Impinging Jets with Spent Fluid Removal through Vent Holes on the Target Surface. Part I. Average Heat Transfer, J. Engineering for Power, Vol. 102, pp. 994-999, 1980.
66. J. Stevens and B.W. Webb, Local Heat Transfer Coefficients under an Axisymmetric, Single-Phase Liquid Jet, J. Heat Transfer, Vol. 113, pp. 71-78, 1991.
67. C. O. Popiel and L. Boguslawski, Mass or Heat Transfer in Impinging Single, Round Jets Emitted by a Bell-Shaped Nozzle and Sharp-Ended Orifice, Proc, 8th Int. Heat Transfer Conf., pp. 1187-1192, 1986.
68. J. Stevens, Y. Pan, and B. W. Webb, Effect of Nozzle Configuration on Transport in the Stagnation Zone of Axisymmetric, Impinging Free-Surface Liquid Jets: Part I. Turbulent Flow Structure, J. Heat Transfer, Vol. 114, pp. 874-879, 1992.
69. Y. Pan, J. Stevens, and B. W. Webb, Effect of Nozzle Configuration on Transport in the Stagnation Zone of Axisymmetric, Impinging Free-Surface Liquid Jets: Part I I. Local Heat Transfer. J. Heat Transfer, Vol. 114, pp. 880-886, 1992.
70. D. T. Vader, F. P. Incropera, and R. Viskanta, Local Convecti ve Heat Transfer from a Heated Surface to an Impinging, Planar Jet of Water, Int. J. Heat Mass Transfer, Vol. 34, pp. 611-623, 1991.
71. D. H. Wolf, R. Viskanta, and F. P. Incropera, Local Convecti ve Heat Transfer from a Heated Surface to a Planar Jet of Water with a Nonuniform Velocity Profile, J. Heat Transfer, Vol. 112, 899-905, 1990.
72. M. D. McGuinness, Flow with a Separation Bubble: Steady and Unsteady Aspects, Ph.D. Dissertation, Cambridge University Engineering Department, 1978.
73. E. P. Sutton, G. P. Evans, M. D. McGuinness, and K. M. Svchla, Influence of Wall Vibrations on a Flow with Boundary-Layer Separation at a Convex Edge, in E. Michel et al. (cds.) Unsteady Turbulent Shear Flows, I U T A M Symp, Toulouse, May 5-8, pp. 284-293, 1981.
74. A. J. Ward-Smith, Pressure Losses in Ducted Flows, Chap. 4, Buttcrworths, London, 1971.
75. M. T. Scholtz and O. Trass, Mass Transfer in a Nonuniform Impinging Jet, AIChEJ., Vol. 16, pp. 82-96, 1970.
76. E. M. Sparrow and L. Lee, Analysis of Flow Field and Impingement Heal/Mass Transfer due to a Nonuniform Slot Jet, J. Heat Transfer, Vol. 97, pp. 191 -197, 1975.
77. K. Kataoka, M. Suguro, H. Degawa, K. Maruo, and 1. Minala, The Effect of Surface Renewal due to Largc-Scalc Eddies on Jet Impingement Heat Transfer, Int. J. Heat Mass Transfer, Vol. 30, pp. 559-567, 1987.
78. C. J. Danck and R. J. Moffat, Heat Transfer under Impinging Jets at Very Close Jct-to-Target Spacings, Report No. HMT-50, Department of Mechanical Engineering, Stanford University, 1995.
79. C. J. Hoogendoorn, The Effect of Turbulence on Heat Transfer at a Stagnation Point, Int. J. Heat Mass Transfer, Vol. 20, pp. 1333-1338, 1977.
80. S. Polat, B. Huang, A. S. Mujumdar, and W. J. M. Douglas, Numerical Flow and Heat Transfer under Impinging Jets: A Review, Ann. Rev. Num. FluidMech. Heat Transfer, Vol. 2, pp. 157-197, 1989.
81. S. Polat, Heat and Mass Transfer in Impingement Drying, Int. J. Drying TechnoL, Vol. I I, pp. 1147-1176, 1993.
82. M. Wolfshtein, Some Solutions of the Plane Turbulent Impinging Jet, J. Basic Engineering, Vol. 38, pp. 577-612, 1969.
83. W. W. Bower, D. R. Kotansky, and G. H. Hoffman, Computations and Measurements of Two-Dimensional Turbulent Jet Impingement Flow Fields, Proc. Symp. Turbulent Shear Flows, Pennsylvania State University, Paper 3 - 1, 1977.
84. R. K. Agarwal and W. W. Bower, Navier-Stokes Computations of Turbulent Compressible Two-Dimensional Impinging Jet Field, AlAA J., Vol. 20, pp. 577-584, 1982.
85. R. S. Amano and M. K. A Jensen, Numerical and Experimental Investigation of Turbulent Heat Transport of an Axisymmetric Jet Impinging on a Flat Plate, A S M E Paper No. HT-55, 1982.
86. R. S. Amano, and H. Brandt, Numerical Study of Turbulent Axisymmetric Jets Impinging on a Flat Plate and Flowing into an Axisymmetric Cavity, J. Fluids Eng., Vol. 106, pp. 410-417, 1984.
87. R. S. Amano and S. Sugiyama, An Investigation on Turbulent Heat Transfer of an Axisymmetric Jet Impinging on a Flat Plate, B. JSME, Vol. 28, pp. 74-79, 1985.
88. B. E. Launder and D. B. Spalding, Lectures in Mathematical Models of Turbulence, Academic Press, London, 1972.
89. C. C. Chieng and B. E. Launder, On the Calculation of Turbulent Heal Transport Downstream from an Abrupt Pipe Expansion, Numerical Heat Transfer, Vol. 3, pp. 189-207, 1980.
90. G. K. Morris, S. V. Garimella, and R. S. Amano, Prediction of Jet Impingement Heat Transfer Using a Hybrid Wall Treatment with Different Turbulent Prandtl Number Functions, J. Heat Transfer, Vol. 118, pp. 562-569, 1996.
91. R. W. Johnson, and B. E. Launder, Discussion of "On the Calculation of Turbulent Heat Transport Downstream from an Abrupt Pipe Expansion," Num. Heat Transfer, Vol. 5, pp. 493-496, 1982.
92. S. M. Hosseinalipour and A. S. Mujumdar, Comparative Evaluation of Different Turbulence Models for Confined Impinging and Opposing Jet Flows, Num. Heat Transfer, Vol. 28, pp. 647-666, 1995.
93. G. K. Morris, S. V. Garimella, and J. A. Fitzgerald, Flow Field Prediction in Submerged and Confined Jet Impingement Using the Reynolds Stress Model, J. Electronic Packaging, Vol. 121, pp. 255-262, 1999.
94. M. Dianant, M. Fairweather, and W. P. Jones, Predictions of Axisymmetric and Two-Dimcnsional Impinging Turbulent Jets, Int. J. Heat Fluid Flow, Vol. 17, pp. 530-538, 1996.
95. T. J. Craft, L. J. W. Graham, and B. E. Launder, Impinging Jet Studies for Turbulence Model Assessment: Part 2. An Examination of the Performance of Four Turbulence Models, Int. J. Heat Mass Transfer, Vol. 36, pp. 2685-2697, 1993.
96. Fluent, FLUENT User's Manual, Vol. 1, Version 4.23, Fluent, Inc. 1993.
97. W. M. Kays, Turbulent Prandtl Number—Where Are We? J. Heat Transfer, Vol. 116, pp. 294-295, 1994.
98. A. T. Wassel and I. Cation, Calculation of Turbulent Boundary Layers over Flat Plates with Different Phcnomcnological Theories of Turbulence and Variable Turbulent Prandtl Numbers, Int. J. Heat Mass Transfer, Vol. 15, pp. 1-17, 1972.
99. M. M. Gibson and B. E. Launder, On the Calculation of Horizontal, Turbulent, Free-Shear Flows under Gravitational Influence, Trans. ASME, Vol. 93C, pp. 81 -87,1976.
100. A. Malholra and S.S. Kang, Turbulent Prandtl Number in Circular Pipes, Int. J. Heat Mass Transfer, Vol. 27, pp. 2158-2161, 1984.
101. C. Y. Guo and W. H. C. Maxwell, Numerical Modeling of Normal Turbulent Plane Jet Impingement on a Solid Wall, J. Eng. Meek, Vol. 110, pp. 1498-1509, 1984.
102. M. Ciofalo, and M. W. Collins, k-n Predictions of Heal Transfer in Turbulent Recirculating Flows Using an Improved Wall Treatment, Num. Heat Transfer, Vol. 15, pp. 21-47, 1989.
103. B. E. Launder and D. B. Spalding, The Numerical Computation ofTurbulent Flows, Imperial College of Science and Technology, London, NTIS N74-12066, 1973.
104. Fluent, FLUENT User's Guide, Vols. 1 -4, Release 4.4, Fluent, Inc., 1996.
105. B. E. Launder, B. J. Reece, and W. Rodi, Progress in the Development of a Reynolds Stress Turbulence Closure, J. Fluid Mech, Vol. 144, pp. 79-101, 1975.
106. W. Rodi, Turbulence Models and Their Application in Hydraulics, Brookfield Publishing, Brookfield, V T, 1984.
107. F. S. Lien and M. A. Lcschzincr, Assessment of Turbulence Transport Models Including Non-Linear R N G Eddy-Viscosity Formulation and Second-Moment Closure for Flow over a Backward-Facing Step, Computers Fluids, Vol. 23, pp. 983-1000, 1994.
108. K. J. McNaughton and C. G. Sinclair, Submerged Jets in Short Cylindrical Flow Vessels, J. Fluid Mech., Vol. 25, pp. 367-375, 1966.
109. V. Yakhot and S. A. Orszag, Renormalization Group Analysis of Turbulence, Basic Theory, J. Scientific Computing, Vol. 1, pp. 1-51, 1986.
110. S.V. Garimella, Recent Developments in High-Performance Cooling Techniques for Electronic Systems, in J. P. Bardon et al. (eds.) Thermal Management ofElectronic Systems III, Elsevier, Amsterdam, pp. 3-16, 1997.
111. T. J. Hcindcl, S. Ramadhyani, F. P. Incropcra, and A. Campo, Surface Enhancement of a Heal Source Exposed lo a Circular Liquid Jel wilh Annular Collection of the Spent Fluid, Topics in Heat Transfer, HTD-Vol. 206-2, pp. 111-118, 1992.
112. P. F. Sullivan, S. Ramadhyani, and F. P. Incropera, Use of Smooth and Roughened Spreader Plates to Enhance Impingemeni Cooling of Small Heat Sources with Single Circular Liquid Jets, Topics in Heat Transfer, HTD-Vol. 206-2, pp. 103-1 10, 1992.
113. K. L. Teuscher, S. Ramadhyani, and F. P. Incropera, Jet Impingement Cooling of an Array of Discrete Heat Sources with Exlended Surfaces, Enhanced Cooling Techniques for Electronics Applications, HTD-Vol. 263, pp. 1-10, 1993.
114. L. G. Hansen and B. W. Webb, Air Jet Impingement Heat Transfer from Modified Surfaces, Int. J. Heat Mass Transfer, Vol. 36, pp. 989-997, 1993.
115. D. Pricdcman, V. Callahan, and B. W. Webb, Enhanced Surface Liquid Jet Impingemeni Heat Transfer, Enhanced Cooling Techniques for Electronics Applications, ASME HTD-Vol. 263, pp. 43-48, 1993.
116. D. Copeland, Single-Phase and Boiling Cooling of Small Pin Fin Arrays by Mulliple Slot Nozzle Suction and Impingement, IEEE Trans. Components, Packaging, and Manuf. Tech., Part A, Vol. 18, pp. 510-516, 1995.
117. D. Copeland, Single-Phase and Boiling Cooling of Small Pin Fin Arrays by Mulliple Nozzle Jet Impingement, J. Electronic Packaging, Vol. 118, pp. 21-26, 1996.
118. P. Hrycak, Heal Transfer from Impinging Jets lo a Flal Piale with Conical and Ring Protuberances, Int. J. Heat and Mass Transfer, Vol. 13, pp. 2145-2154, 1984.
119. 2 Chip, Adv. Electron. Packag., EEP-Vol. 4 - 1, pp. 419-423, 1993.
120. L. A. Brignoni and S. V. Garimella, Experimenlal Oplimizalion of Confined Air Jel Impingemeni on a Pin-Fin Heat Sink, IEEE Trans. Components and Packaging Technologies, Vol. 22, pp. 399-404, 1999.
121. H. A. El-Sheikh and S. V. Garimella, Enhancement of Air Jet Impingement Heal Transfer Using Pin-Fin Heat Sinks, IEEE Trans, on Components and Packaging Technologies (in press).
122. H. A. El-Sheikh and S. V. Garimella, Heat Transfer in Multiple Air Jet Impingement Using Pin-Fin Heal Sinks, IEEE Trans, on Advanced Packaging, Vol. 23, pp. 113-121, 2000.