Primary creep behavior of Ti-48Al-2W as a function of stress and lamellar morphology

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 34 A, Issue 10, 2003, Pages 2177-2190

  Seo, D Y ^a   Beddoes, J ^b   Zhao, L ^a  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

^b CARLETON UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

BINARY ALLOYS; CREEP; DISLOCATIONS (CRYSTALS); METALLOGRAPHIC MICROSTRUCTURE; MORPHOLOGY; NUCLEATION; PHASE INTERFACES; POWDER METALLURGY; PRECIPITATION (CHEMICAL); STRESSES; TENSILE STRENGTH;

CREEP MECHANISM; DISLOCATION MOBILITY; INTERFACE DISLOCATION EMISSION; LAMELLAR INTERFACES; LAMELLAR MORPHOLOGY; TITANIUM ALUMINIDE;

TITANIUM ALLOYS;

EID: 0345566267     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-003-0281-z     Document Type: Article

References (54)

1. H.A. Lipsitt, D. Shechtman, and R.E. Schafrick: Metall. Trans. A, 1975, vol. 6A, p. 1991.
2. Y.-W. Kim: JOM, 1989, vol. 41 (7), p. 24.
3. Y.-W. Kim and F.H. Froes: in High Temperature Aluminides and Intermetallics, S.H. Whang, C.T. Liu, D.P. Pope, and J.O. Stiegler, eds., TMS, Warrendale, PA, 1990, pp. 465-92.
4. Y.-W. Kim and D.M. Dimiduk: JOM, 1991, vol. 43 (8), p. 40.
5. Y.-W. Kim: JOM. 1994, vol. 46 (7), pp. 30-39.
6. H.A. Lipsitt: in High-Temperature Ordered Intermetallic Alloys, C.C. Koch, C.T. Liu, and N.S. Stoloff, eds., Materials Research Society, Pittsburgh, PA, 1985, vol. 39, pp. 351-64.
7. C. Tönnes, J. Rösler, R. Baumann, and M. Thumann: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 241-45.
8. J. Triantafillou, J. Beddoes, and W. Wallace: Can. Aeronautics Space J., 1996, vol. 42 (2), pp. 108-15.
9. M. Es-Souni, A. Bartels, and R. Wagner: Mater. Sci. Eng., 1995, vols. A192-A193, pp. 698-706.
10. B.D. Worth, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2947-59.
11. G.B. Viswanathan and V.K. Vasudevan: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 967-74.
12. S.W. Schwenker and Y.-W. Kim: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 985-92.
13. P.R. Bhowal, W.A. Konkel, and H.F. Merrick: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 787-94.
14. J. Beddoes, L. Zhao, P. Au, D. Dudzinski, and J. Triantafillou: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 109-18.
15. K. Maruyama, R. Yamamoto, H. Nakakuki, and N. Fujitsuna: Mater. Sci. Eng., 1997, vols. A239-A240, p. 419.
16. P.D. Crofts, P. Bowen, and I.P. Jones: Scripta Mater., 1996, vol. 35, pp. 1391-96.
17. J. Beddoes, J. Triantafillou, and L. Zhao: High-Temperature Ordered Intermetallic Alloys VII, MRS 460, Boston, MA, 1997, C.C. Koch, C.T. Liu, N.S. Stoloff, and A. Wanner, eds. Materials Research Society, Pittsburgh, PA, 1997, pp. 293-98.
18. J.N. Wang, A.J. Schwartz, T.G. Nieh, C.T. Liu, V.K. Sikka, and D. Clemens: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 949-57.
19. F. Herrouin, P. Bowen, and I.P. Jones: High-Temperature Ordered Intermetallic Alloys VII, MRS 460, Boston, MA, 1997, C.C. Koch, C.T. Liu, N.S. Stoloff, and A. Wanner, eds., Materials Research Society, Pittsburgh, PA, 1997, pp. 287-92.
20. K. Maruyama, R. Yamamoto, H. Nakakuki, and N. Fujitsuna: Mater. Sci. Eng., 1997, vols. A239-A240, pp. 419-28.
21. T.A. Parthasarathy, M. Keller, and M.G. Mendiratta: Scripta Mater., 1998, vol. 38, pp. 1025-31.
22. J.H. Yun, M.H. Oh, S.W. Nam, D.M. Wee, H. Inui, and M. Yamaguchi: Mater. Sci. Eng., 1997, vols. A239-A240, pp. 702-08.
23. J. Beddoes, L. Zhao, W.R. Chen, and X. Du: High Temperature Ordered Intermetallics VIII, MRS 552, Boston, MA, 1999, E.P. George, M.J. Mills, and M. Yamaguchi, eds., Materials Research Society, Pittsburgh, PA, 1999, pp. kk1.1.1-kk1.1.12.
24. G.B. Viswanathan, Y.-W. Kim, and M.J. Mills: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 653-60.
25. F. Herrouin, D. Hu, P. Bowen, and I.P. Jones: Acta Mater., 1998, vol. 46, pp. 4963-72.
26. W.H. Tian and M. Nemoto: Intermetallics, 1997, vol. 5, pp. 237-44.
27. P.L. Martin and H.A. Lipsitt: Proc. 4th Int. Conf. Creep and Fracture of Engineering Materials and Structures, The Institute of Metals, London, 1990.
28. J. Beddoes, L. Zhao, and W. Wallace: Int. Mater. Rev., 1995, vol. 40 (5), pp. 197-217.
29. D.Y. Seo, J. Beddoes, L. Zhao, and G. Botton: Mater. Sci. Eng., 2002, vols. 329C-331C, pp. 810-20.
30. D.Y. Seo, T.R. Bieler, and D.E. Larsen: in Structural Intermetallics
31. M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, TMS, Warrendale, PA, 1997, p. 137.
32. D.Y. Seo, T.R. Bieler, and D.E. Larsen: in Advances in the Science and Technology of Titanium Alloy Processing, I. Weiss, R. Srinivasan, P. Bania, and D. Eylon, eds., TMS, Warrendale, PA, 1997, pp. 603-22.
33. D.Y. Seo, T.R. Bieler, and D.E. Larsen: Proc. 7th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, Irvine, CA, Aug. 1997, pp. 577.
34. D.Y. Seo, T.R. Bieler, and D.E. Larsen: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1997, p. 281.
35. D.Y. Seo, T.R. Bieler, S.U. An, and D.E. Larsen: Mater. Metall. Trans. A, 1998, vol. 29A, pp. 89-98.
36. L.M. Hsiung and T.G. Nieh: Scripta Mater., 1997, vol. 36, p. 323.
37. J. Beddoes, D. Dudzinski, and L. Zhao: High Temp. Mater. Processing, 1999, vol. 18 (3), pp. 173-84.
38. M. Oehring, P.J. Ennis, F. Appel, and R. Wagner: High-Temperature Ordered Intermetallic Alloys VII, MRS 460, Boston, MA, 1999, C.C. Koch, C.T. Liu, N.S. Staloff, and A. Wanner, eds, Materials Research Society, Pittsburgh, PA, 1997, p. 257.
39. W. Wallace, L. Zhao, J. Beddoes, and D. Morphy: Hot Isostatic Pressing '93, L. Delaey et al., eds., Elsevier Science, New York, NY, pp. 99-108.
40. Y. Zheng, L. Zhao, and K. Tangri: Scripta Metall., 1992, vol. 26, p. 291.
41. W.R. Chen: Ph.D. Thesis, Carleton University, Ottawa, 2000.
42. J. Beddoes, W.R. Chen, and L. Zhao: J. Mater. Sci., 2002, vol. 37, pp. 621-27.
43. R.W. Ramanujan, P.J. Maziasz, and C.T. Liu: Acta Mater., 1996, vol. 44, p. 2661.
44. D.Y. Seo, J. Beddoes, and L. Zhao: 3rd Int. Symp. on Structural Intermetallics, Jackson Hole, WY, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Innui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, Apr. 27-May 2, 2002, pp. 653-62.
45. J. Beddoes, D.Y. Seo, W.R. Chen, and L. Zhao: Intermetallics, 2001, vol. 9, pp. 915-22.
46. W.R. Chen, J. Beddoes, and L. Zhao: Mater. Sci. Engineer., 2002, vol. A323, pp. 306-17.
47. Y.-W. Kim: Intermetallics, 1998, vol. 6, p. 623.
48. G.B. Viswanathan, S. Karrikeyan, M.J. Mills, and V.K. Vasudevan: Mater. Sci. Eng., 2001, A319-A321, pp. 833-837.
49. G.B. Viswanathan, R.W. Hayes, and M.J. Mills: Mater. Sci. Eng., 2001, vols. A319-A321, pp. 706-10.
50. L.M. Hsiung and T.G. Nieh: in Interstitial and Substitutional Solute Effects in Intermetallics, I. Baker, R.D. Nobeb, and E.P. George, eds., TMS, Warrendale, PA, 1993, p. 201.
51. S. Karrikeyan, G.B. Viswanathan, Y.W. Kim, V.K. Vasudevan, and M.J. Mills: 3rd Int. Symp. on Structural Intermetallics, Jackson Hole, WY, Apr. 27-May 2, 2002, pp. 717-23.
52. F. Appel and R. Wagner: Mater. Sci. Eng., 1998, vol. R22, pp. 221-26.
53. M. Oehring, F. Appel, P.J. Ennis, and R. Wagner: Intermetallics, 1999, vol. 7, pp. 355-45.
54. F. Appel: Intermetallics, 2001, vol. 9, pp. 907-14.