Estimation of optimal blank holder force trajectories in segmented binders using an ARMA model

Journal of Manufacturing Science and Engineering

Volumn 125, Issue 4, 2003, Pages 763-770

  Krishnan, Neil ^a   Cao, Jian ^a  

^a Northwestern University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; ESTIMATION; FINITE ELEMENT METHOD; FORMABILITY; MATHEMATICAL MODELS; STATISTICAL METHODS; TWO TERM CONTROL SYSTEMS;

AUTO-REGRESSIVE MOVING-AVERAGE MODEL; BLANK HOLDER FORCE; SOFTWARE PACKAGE ABAQUS;

METAL FORMING;

EID: 0344515504     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1616948     Document Type: Article

References (25)

1. Ahmetoglu, M. A., Coremans, A., Kinzel, G. L., and Altan, T., 1993, "Improving Drawability by Using Variable Blank Holder Force and Pressure in Deep Drawing of Round and Non-Symmetric Parts," SAE Technical Paper No. 930287, Warrendale, PA.
2. Kergen, R., and Jodogne, P., 1992, "Computerized Control of Blank Holder Pressure on Deep Drawing Presses," SAE Technical Paper No. 920433, Warrendale, PA.
3. Cao, J., and Boyce, M. C., 1997, "A Predictive Tool for Delaying Wrinkling and Tearing Failures in Sheet Metal Forming," ASME J. Eng. Mater. Technol. 119, pp. 354-365.
4. Cao, J., Kinsey, B., and Solla, S. A., 2000, "Consistent and Minimal Springback Using a Stepped Binder Force Trajectory and Neural Network Control," ASME J. Eng. Mater. Technol., 122, pp. 113-118.
5. Liu, G., Lin, Z., Bao, Y., and Cao, J., 2002, "Eliminating Springback Error in U-Shaped Part Forming by Variable Blank Holder Force," J. Mater. Eng. Perform., 11(1), pp. 64-70.
6. Siegert, K., Wagner, S., and Zeigler, M., 1996, "Closed Loop Binder Force Systems," SAE Technical Paper No. 960824.
7. Neugebauer, R., Leib, U., and Braunlich, H., 1997, "Influence of Material Flow in Deep Drawing Using Individual Controllable Draw Pins and Smooth Blank Holder Design," SAE Technical Paper No. 970989.
8. Doege, E., Eland, L.-E., and Ropers, C., 1999, "Pliable Blank Holder Systems for the Optimization of Process Conditions in Deep Drawing," Adv. Technol. Of Plasticity, Proceedings of the 6th ICTP, Sept. 19-24, pp. 177-182.
9. Kinsey, B., Liu, Z., and Cao, J., 2000, "A Novel Forming Technology for Tailor-Welded Blanks," J. Mater. Process. Technol., 99, pp. 145-153.
10. Shulkin, L., Jansen, S. W., Ahmetoglu, M. A., Kinzel, G. L., and Altan, T., 1996, "Elastic Deflections of the Blank Holder in the Deep Drawing of Sheet Metal," J. Mater. Process. Technol., 59(1-2), pp. 34-40.
11. Hardt, D. E., and Lee, C. G. Y., 1986, "Real-Time Control of Sheet Stability During Stamping," Proceedings of the 13th North American Manufacturing Research Conference, Society of Manufacturing Engineers, Dearborn, MI, pp. 315-322.
12. Kergen, R., and Jodogne, P., 1992, "Computerized Control of Blank Holder Pressure on Deep Drawing Presses," Society of Automotive Engineers Technical Paper No. 920433, Warrendale, PA.
13. Kergen, R., 1993, "Closed Loop Control of Blank Holder Force Based on Deep Drawing Parameters: Its Laboratory and Industrial Applications," ID-DRG Working Group, Linz, Austria.
14. Hirose, Y., Kojima, M., Ujihara, S., and Hishida, U., 1992, "Development of Forming Techniques With Real-Time Control of Blank Holding Force," Proceedings of the 17th Biennial Congress of the IDDRG, pp. 300-307.
15. Kirii, K., Shinabe, M., Hirabayashi, Y., and Akiyama M., 1995, "Binding Force Control of Uni-Pressure Cushion in Automobile Panel Stamping," Society of Automotive Engineers Technical Paper No. 950916, Warrendale, PA.
16. Ahmetoglu, M. A., Coremans, A., Kinzel, G. L., and Altan, T. 1993, "Improving Drawability by Using Variable Blank Holder Force and Pressure in Deep Drawing of Round and Non-Symmetric Parts," Society of Automotive Engineers Technical Paper No. 930287, Warrendale, PA.
17. Ahmetoglu, M. A., Broek, T., Kinzel, G. L., Altan, T., and Chandrokar, K., "Deep Drawing of Rectangular Pans From Aluminum Alloy 2008-T4," Society of Automotive Engineers Technical Paper No. 950694, Warrendale, PA.
18. Sim, H. B., and Boyce, M. C., 1992, "FEM Analysis of Real-Time Stability Control in Sheet Forming Processes," ASME J. Eng. Mater. Technol., 114, pp. 180-188.
19. Siegert, K., and Ziegler, M., 1997, "Pulsating Blank Holder Force," Society of Automotive Engineers Technical Paper No. 970987, Warrendale, PA.
20. Hsu, C.-W., Ulsoy, A. G., and Demeri, M. Y., 2000, "An Approach for Modeling Sheet Metal Forming for Process Controller Design," ASME J. Manuf. Sci. Eng., 122, pp. 717-724.
21. Graupe, D., Krausse, D. J., and Moore, J. B., 1975, "Identification of Autoregressive Moving-Average (ARMA) Parameters of a Time Series," IEEE Trans. Autom. Control, AC-20(1), pp. 104-107.
22. Kay, S. M., and Marple, S. L., Jr., 1981, "Spectrum Analysis - A Modern Perspective," Proceedings of IEEE, 69(11), pp. 1380-1414.
23. Fassois, S. D., Eman, K. F., and Wu, S. M., 1989, "A Fast Algorithm for On-Line Machining Process Modeling and Adaptive Control," ASME J. Eng. Ind., 111, pp. 133-139.
24. Graupe, D., 1984, Time Series Analysis, Identification and Adaptive Filtering, Robert E. Krieger Publishing Company, Malabar, Chap. 5, pp. 70-88.
25. Jalkh, P., Cao, J., Hardt, D., and Boyce, M. C., 1993, "Optimal Forming of Al 2008-T4 Conical Cups Using Force Trajectory Control," Journal of Materials & Manufacturing, 102, Sec. 5, pp. 416-427.