A predictive tool for delaying wrinkling and tearing failures in sheet metal forming

Journal of Engineering Materials and Technology, Transactions of the ASME

Volumn 119, Issue 4, 1997, Pages 354-365

  Cao, J ^a,b   Boyce, M C ^a  

^a Massachusetts Institute of Technology Cambridge   (United States)

^b Northwestern University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BUCKLING; COMPUTER SIMULATION; FAILURE ANALYSIS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; NUMERICAL METHODS; PHASE DIAGRAMS; PLASTIC DEFORMATION; SHEET METAL;

FORMING LIMIT DIAGRAMS; TEARING; VARIABLE BINDER FORCE; WRINKLING;

METAL FORMING;

EID: 0031247720     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.2812270     Document Type: Article

References (39)

1. ABAQUS Manual Version 5.4 (1994), Hibbitt, Karlsson & Sorensen, Inc.
2. Anand, L., and Tong, W. (1993), “Constitutive Model for Friction in Forming,” CIRP Annuls, Vol. 42(1), pp. 361-366.
3. Bakkestuen, R. S. (1994), “Closed Loop Control of Forming Stability During Aluminum Stamping,” M.S. thesis, Massachusetts institute of Technology, Cambridge, MA.
4. Barlat, F. (1987), “Crystallographic texture, anisotropic yield surface and forming limits of sheet metals,” Mat. Sci. Eng., Vol. 91, pp. 55-72.
5. Cao, J. and Boyce, M. (1994), Design and Control of Forming Parameters Using Finite Element Analysis, Symposium on Computational Material Modeling, ASME, Chicago, IL.
6. Cao, J. (1995), “Design and Control of Forming Parameters Using Finite Element Analysis,” h.D. Thesis, MIT.
7. Cao, J. and Boyce, M. C. (1997), “Wrinkling Behavior of Rectangular Plates under Lateral Constraint,” Int. J. Solids Structures, Vol. 34(2), pp. 153-176.
8. Cao, J., Karafillis, A and Boyce, M. C. (1997), “Prediction of Forming Limit Diagram using KB yield criterion,” International Symposium on Plasticity and its current Applications.
9. Fatnassi, A., Tomita, Y. and Shindo, A. (1985) “Non-Axisymmetric Buckling Behavior of Elastic-Plastic Circular Tubes Subjected to a Nosing Operation,” Int. J. Mech. Set, Vol. 27, pp. 643-651.
10. Fenn, R. and Hardt, D. E. (1993) “Real-Time Control of Sheet Stability During Forming,” ASME Journal of Engineering for Industry, Vol. 115(3), Aug., pp. 299-308.
11. Ghosh, A. K. (1978) “Plastic Flow Properties in Relation to Localized Necking in Sheets,” Mechanics of Sheet Metal Forming, Koistinen, D. P. and Wang, N. M., eds., Plenum Press, 287-312.
12. Goodwin, G. M. (1968) “Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop,” SAE paper, No. 680093.
13. Graf, A., and Hosford, W. (1993), “Plane-Strain Tension Tests of AL2008-T4 Sheets,” Sheet Metal and Stamping Symposium SAE Pub., 944, Warrendale, PA, pp. 269-272.
14. Hill, R. (1952), “On Discontinuous Plastic States, with Special Reference to Localized Necking in Thin Sheets,” J. Mech. Phys. Solids, Vol. 1, pp. 19-30.
15. Hill, R. (1958), “A General Theory of Uniqueness and Stability in Elastic/Plastic Solids,” J. Mech. Phys. Solids, Vol. 6, pp. 236-249.
16. Hirose Y., Hishida Y., Furubayashi, T., Oshima, M., and Ujihara S. (1990), “Part II: Application of BHF-Controlled Forming Techniques,” Proc. 4th Symposium of the Japanese Society for the Technology of Plasticity.
17. Hutchinson, J. W. (1974), Plastic Buckling, Adv. in Appl. Mech., Vol. 14, pp. 67-144.
18. Hutchinson, J. W., and Neale, K. W. (1978), “Sheet Necking,” Mechanics of Sheet Metal Forming, Koistinen, D. P. and Wang, N. M., eds Plenum Press, pp. 127-151.
19. Hutchinson, J. W., and Neale, K. W. (1985), “Wrinkling of Curved Thin Sheet Metal,” Plastic Instability, Presses Ponts et Chaussées, Paris, pp. 71-78.
20. IDDRG (1994), International Deep Drawing Conference 1994, Lisboa, Portugal.
21. Jalkh, P., Cao, J., Hardt, D., and Boyce, M. C. (1993), “Optimal Forming of Aluminum 2008-T4 Conical Cups Using Force Trajectory Control,” Sheet Metal and Stamping Symposium, SAE, Warrendale, PA, pp. 101-112.
22. Karafillis, A. P. (1992), “Tooling Design for Sheet Metal Forming Using Finite Element Analysis,” S.M. Thesis, Massachusetts Institute of Technology.
23. Keeler, S. P., and Backofen, W. A. (1964) “Plastic Instability and Fracture in Sheet Stretched Over Rigid Punches,” ASM Transactions Quarterly, Vol. 56, pp. 25-48.
24. Kleemola, H., and Pelkkikagas, M. (1977), “Effect of Predeformation and Strain Path on the Forming Limits of Steel, Copper and Brass,” Sheet Met. Ind., Vol. 54(6), pp. 591-599.
25. Lee, C., and Hardt, D. E. (1986), “Closed-Loop Control of Sheet Metal Stability During Stamping,” 1986 North American Manufacturing Research Conference, May 28-30.
26. Marciniak, Z., and Kuczynski, K. (1967), “Limit Strains in the Processes of Stretch Forming Steel Metal,” Int. J. Mech. Sci., Vol. 9, pp. 609-620.
27. Neale, K. W., and Chater, E. (1980), “Limit Strain Prediction for Strain-Rate Sensitive Anisotropic Sheets,” Int. J. Mech. Sci., Vol. 22, pp. 563-574.
28. NumiForm (1992), Numerical Methods in Industrial Forming Processes, A. A. Balkema, Rotterdam, Netherlands.
29. NumiSheet (1993), Numerical Simulation of 3-D sheet Metal Forming Processes, Makinouchi, Tokyo, Japan.
30. Rebelo, N., Nagtegaal, J. C. and Hibbitt, H. D, (1990), “Finite element analysis of sheet forming processes,” Int. J. Num. Meth. Eng., Vol. 30, p. 1471.
31. SAE (1995), Sheet Metal and Stamping Symposium, 1995 Soc. Auto. Eng. Inter. Cong. & Exp., Detroit, MI.
32. Sim, H. B., and Boyce, M. C. (1992), “Finite Element Analysis of Real-Time Stability Control in Sheet Forming Processes,” ASME Journal of Engineering Materials and Technology, Vol. 114(2), Apr, pp. 180-188.
33. Sowerby, R., and Duncan, J. L. (1971) “Failure in Sheet Metal in Biaxial Tension,” Int. J. Mech. Sci., Vol. 13, pp. 217-229.
34. Sttiren, S., and Rice, J. R. (1975), “Localized Necking in Thin Sheets,” J. Mech. Phys. Solids, Vol. 23, pp. 421-441.
35. Taylor, L., Cao, J., Karafillis, A. P. and Boyce, M. C. (1995), “Numerical Simulations of Sheet Metal Forming,” J. Mat. Proc. Tech., Vol. 50, pp. 168-179.
36. Tomita, Yoshihiro (1994), “Simulations of Plastic Instabilities in Solid Mechanics,” Appl. Mech. Rev., Vol. 47/6, pp. 171-205.
37. Traversin, M. and Kergen, R. (1995), “Closed Loop Control of the Blank-Holder Force in Deep-Drawing: Finite Elements Modelling of its Effects and Advantages,” J. Mat. Proc. Tech., Vol. 50, pp. 306-317.
38. Triantafyllidis, N. and Needleman A. (1980), “An Analysis of Wrinkling in the Swift Cup Test,” ASME Journal of Engineering Materials and Technology, Vol. 102, pp. 241-248.
39. Tvergaard, V. (1978) “Effect of Kinematic Hardening on Localized Necking in Biaxially Stretched Sheets,” Int. J. Mech. Sci., Vol. 20, pp. 651-658.