Processing and properties of nanograin silicon carbide

Journal of the American Ceramic Society

Volumn 82, Issue 10, 1999, Pages 2585-2593

  Vassen, Robert ^a   Stöver, Detlev ^a  

^a FORSCHUNGSZENTRUM JÜLICH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; CRYSTAL MICROSTRUCTURE; FRACTURE TOUGHNESS; GRAIN GROWTH; GRAIN SIZE AND SHAPE; HOT ISOSTATIC PRESSING; NANOSTRUCTURED MATERIALS; PARTICLE SIZE ANALYSIS; POWDERS; SINTERING; THERMAL DIFFUSION IN SOLIDS; TWINNING;

PRESSURE ASSISTED SINTERING;

SILICON CARBIDE;

EID: 0343898037     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.1999.tb02127.x     Document Type: Article

References (58)

1. H. Gleiter, "Materials with Ultra-fine Grain Size"; pp. 15-21 in Deformation of Polycrystalls: Mechanisms and Microstructures. Edited by N. Hansen, A. Horsewell, and T. Leffes. Risø National Laboratory, Roskilde, Denmark, 1981.
2. U. Herr, R. Birringer, and H. Gleiter, "Nanocrystalline Materials," Ceram. Forum Int., 67, 70-74 (1990).
3. R. W. Siegel, "What Do We Really Know About the Atomic-Scale Structures of Nanophase," Mater. J. Phys. Chem. Solids, 55 [10] 1097-106 (1994).
4. C. Suryanarayana and F. H. Froes, "The Structure and Mechanical Properties of Metallic Nanocrystals, " Metall. Trans., A23 1071-81 (1992).
5. J. A. Eastman, L. J. Thompson, and B. J. Kestel, "Narrowing of the Palladium Miscibility Gap in Nanocrystalline Palladium, " Phys. Rev., B48, [1] 84-92 (1993).
6. M. J. Mayo, D. C. Hague, and D.-J. Chen, Mater. Sci. Eng., A166, 145-59 (1993).
7. 2 During Annealing," J. Appl. Phys., 75 [2] 770-79 (1994).
8. H. Hahn, J. Logas, H. F. Höfler, Th. Bier, and R. S. Averback, "Microstrucrure of Nanocrystalline Ceramics," Mater. Res. Soc. Symp. Proc., 132, 35-39 (1989).
9. R. Vassen, D. Stöver, and J. Uhlenbusch, "Sintering and Grain-Growth of Ultrafine Amorphous SiCSi-Powder Mixtures"; pp. 791-97 in Euro-Ceramics II, Vol. 2, Structural Ceramics and Composites. Edited by G. Ziegler and H. Hausner. Deutsche Keramische Gesellschaft, Köln, Germany, 1991.
10. H. Hahn, J. Logas, H. J. Höfler, Th. Bier, and R. S. Averback, "Microstructure of Nanocrystalline Ceramics," Mater. Res. Soc. Symp. Proc., 132, 35-39 (1989).
11. M. J. Mayo, "Processing of Nanocrystalline Ceramics from Ultrafine Particles," Int. Mater. Rev., 41 [3] 85-115 (1996).
12. R. A. Andrievski, "Review Nanocrystalline High Melting Point Compound-Based Materials," J. Mater. Sci., 29, 614-31 (1994).
13. R. Vassen, A. Kaiser, J. Förster, H. P. Buchkremer, and D. Stöver, "Densification of Ultrafine SiC Powders," J. Mater. Sci., 31, 3623-37 (1996).
14. Workshop on "Ultrafine-Grained and Nanocrystalline Cemented Carbides"; pp. 139-215, 582-734 in Proceedings of the 14th International Plansee Seminar '97, Vol. 2, Cemented Carbides and Hard Materials. Edited by G. Kneringer, P. Rödhammer, and P. Wilhartitz, RWF, Werbegesellschaft m.b.H., Wattens, Tyrol, Austria, 1997.
15. A. J. Allen, S. Krueger, G. Skandan, G. G. Long, H. Hahn, H. M. Kerch, J. C. Parker, and M. N. Ali, "Microstructural Evolution during the Sintering of Nanostructured Ceramic Oxides," J. Am. Ceram. Soc., 79 [5] 1201-12 (1996).
16. C. D. Sagel-Ransijn, A. J. A. Winnubst, A. J. Burggraaf, and H. Verweij, "The Influence of Crystallization and Washing Medium on the Characteristics of Nanocrystalline Y-TZP," J. Eur. Ceram. Soc., 16, 759-66 (1996).
17. D. C. Hague and M. J. Mayo, "Sinter-Forging of Nanocrystalline Zirconia: I, Experimental," J. Am. Ceram. Soc., 80 [11] 149-56 (1997).
18. R. Vassen and D. Stöver, "HIP Densification of Nanophase SiC"; p. 99 in Proceedings of the British Ceramic Society, Vol. 51, Nanoceramics. Edited by R. Freer. Institute of Materials, Bournemouth, Great Britain, 1993.
19. A. Wilson, J. D. Wright, J. J. Murphy, M. A. M. Stroud, and S. C. Thorpe, Sens. Actuators B, 18-19, 506 (1994).
20. A. Tschoepe and J. Ying, "Nanocrystalline Cerium Oxide Catalytic Materials"; p. 781 in Nanophase Materials. Edited by G. C. Hadjipanayis and R. W. Siegel. Kluwer Academic Publishers, Dordrecht, Netherlands, 1994.
21. R. Vassen and D. Stöver, "Properties of Silicon-Based Ceramics Produced by Hot Isostatic Pressing of Ultrafine Powders," Philos. Mag., B76 [4] 585-91 (1997).
22. M. Guermazi, H. J. Höfler, H. Hahn, and R. S. Averback, "Temperature Dependence of the Hardness of Nanocrystalline Titanium Dioxide," J. Am. Ceram. Soc., 74 [10] 2672-74 (1991).
23. R. Vassen, "Verdichtung und Kornwachstum nanophasiger Keramiken"; pp. 1-15 in Technische Keramische Werkstoffe, 46. Erganzungslieferung, Kapitel 4.4.3.1. Edited by J. Kriegesmann. Deutscher Wirtschaftsdienst, Köln, Germany, 1998.
24. R. Vassen, A. Kaiser, and D. Stöver, "Potential of Nanocrystalline Low-Z Materials for Plasma Facing, Structural Applications in Fusion Reactors," J. Nucl. Mater., 233-236, 708-12 (1996).
25. M. Rose, A. G. Balogh, and H. Hahn, "Instability of Irradiation Induced Defects in Nanostructured Materials," Nucl. Instrum. Methods Phys. Res., Sect. B, 127/128, 119-22 (1997).
26. 2-Laser Pyrolytic Experiment for the Production of Nanosized Ceramic Powders," Appl. Phys. B, 61, 367-75 (1995).
27. J. Förster, "Laserchemische Erzeugung, Charakterisierung und Verdichtung ultrafeiner SiC- und SiC/B-Pulver"; Ph.D. Thesis. Dissertation Heinrich-Heine-Universität Düsseldorf, Düsseldorf, Germany, 1995.
28. J. M. Schultz, Diffraction for Materials Scientists; p. 226. Prentice-Hall, Englewood Cliffs, NJ, 1982.
29. P. Mielke, "Entwicklung endkonturnaher Naßformgebungsverfahren zur Verarbeitung von Feinstpulvern"; Ph.D. Thesis. Rheinisch-Westfälische Technische Hochschule, Aachen, Germany, 1997.
30. S. Prochazka, "The Role of Boron and Carbon in the Sintering of SiC"; in Special Ceramics, No. 6. Edited by P. Popper. British Ceramic Research Association, Manchester, U.K., 1975.
31. W. van Rijswijk and D. J. Shanefield, "Effects of Carbon as a Sintering Aid in Silicon Carbide," J. Am. Ceram. Soc., 73 [1] 148-49 (1990).
32. R. Vassen, D. Stöver, and H.-P. Buchkremer, "Herstellung harter, nanokristalliner SiC-Materialien über einen modifizierten Heiß-Isostatischen Preßprozeß (HIP)," German Pat. No. 196 42 753, granted May 5, 1999.
33. G. K. Williamson and W. H. Hall, "X-ray Line Broadening from Filed Aluminum and Wolfram," Acta Metall., 1, 22-31 (1953).
34. M. I. Mendelson, "Average Grain Size in Polycrystalline Ceramics," J. Am. Ceram. Soc., 52 [8] 443 (1969).
35. G. F. Van der Voort, Metallography - Principles and Practice. McGraw-Hill, New York, 1984.
36. A. G. Evans, "Fracture Toughness: The Role of Indentation Techniques"; pp. 112-35 ASTM Special Technical Publication, Vol. 678, Fracture Mechanics Applied to Brittle Materials. American Society for Testing and Materials, Philadelphia, PA, 1979.
37. E. El-Magd, "Temperature-Dependence of Dynamic Determined Hardness of Metallic Materials," VDI-Ber., 804, 423-34 (1990).
38. R. Gilissen, J. P. Erauw, J. Schrijvers, M. Cauchtier, M. Luce, and N. Herlin, "Encapsulation HIPing of Laser Synthesized Nanosized Silicon Carbide"; pp. 354-62 in Proceedings of the HIP93 Conference (Antwerp, Belgium, April 21-23, 1993). Edited by J. P. Erauw, J. Schrijvers, M. Cauchtier, M. Luce, and N. Herlin. Elsevier, Amsterdam, Netherlands, 1993.
39. S. Prochazka, C. A. Johnson, and R. A. Giddings, "Atmosphere Effects in Sintering of Silicon Carbide"; pp. 366-80 in Proceedings of the International Symposium on Densification of Oxide and Non-oxide Ceramics (Hakone, Japan, 1978). Edited by S. Somiya. Gakufutsu Bunken Fukyu-kai, Tokyo, Japan, 1979.
40. W. van Rijswijk and D. J. Shanefield, "Effects of Carbon as a Sintering Aid in Silicon Carbide," J. Am. Ceram. Soc., 73 [1] 148-49 (1990).
41. J. Kriegesmann, "Sinterphänomene von rekristallisiertem Siliciumcarbid und Aspekte für die Prozeßtechnik"; pp. 172-80 in Hochleistungskeramiken: Herstellung, Aufbau, Eigenschaften. Edited by G. Petzow. VCH Verlagsgesellschaft. Weinheim, Germany, 1996.
42. R. Vassen and D. Stöver, "Oxidation of Ultrafine (Si)SiC Powders," J. Mater. Sci., 29, 3791-96 (1994).
43. W. Kollenberg, "Temperature Dependence of Ceramic Hardness"; pp. 1049-53 in Euro-Ceramics II, Vol. 2, Structural Ceramics and Composites. Edited by G. Ziegler and H. Hausner. Deutsche Keramische Gesellschaft, Köln, Germany, 1991.
44. J. Förster, R. Vassen, and D. Stöver, "Improvement of Fracture Toughness in Hot Isostatically Pressed Mixtures of Ultrafine and Coarse-Grained SiC Ceramics," J. Mater. Sci. Lett., 14, 214-16 (1995).
45. Technical information, "Laborgeräte aus Quarzglas," PHL-B90, Heraeus Quarzschmelze GmbH, Hanau, Germany.
46. Technical information "Schott Technische Gläser," Schott Glaswerke, Mainz, Germany, 1990.
47. C. CM. Wu, R. W. Rice, D. Johnson, and B. A. Platt, "Grain Size Dependence of Wear in Ceramics," Ceram. Eng. Sci. Proc., 6 [7-8] 995-1011 (1985).
48. 3-Keramik," Materialwiss. Werkstofftech., 23, 329-38 (1992).
49. A. G. Evans and D. B. Marshall, "Wear Mechanisms in Ceramics"; pp. 439-52 in Fundamentals of Friction and Wear of Materials. American Society for Metals, Metals Park, OH, 1980.
50. K. Kato, "Tribology of Ceramics," Wear, 136, 117-33 (1990).
51. I. I. Parfenova, Y. M. Tairov, and V. F. Tsvetkov, "Thermal Conductivity of Silicon Carbide in the Temperature Range 300-3000 K," Sov. Phys.-Semicond. (Eng. Transl.), 24 [2] 158-61 (1990).
52. P. G. Klemens and M. Gell, "Thermal Conductivity of Thermal Barrier Coatings," Mater. Sci. Eng., A245, 143-49 (1998).
53. 3," J. Appl. Phys., 61 [10] 4894-901 (1987).
54. C. A. Nannetti, E. Borsella, R. Fantoni, and S. Piccirillo, "Characterisation and Densification of Laser Synthesized SiC Powders"; pp. 1139-48 in Proceedings of the 7th CIMTEC-World Ceramics Congress and Satellite Symposia (Montecatini, June 24-30, 1990). Edited by P. Vincenzini. Elsevier, Amsterdam, Netherlands, 1991.
55. C. Wehling, "Plasmasynthese und Sinterverhalten von ß-Siliziumcarbid"; Ph.D. Thesis. Technische Universität, Berlin, Germany, 1993.
56. B. Bishop, M. S. Spotz, W. E. Rhine, H. K. Bowen, and J. R. Fox, "Sintering of Silicon Carbide Prepared from a Polymeric Precursor," Ceram. Trans., 1, 856-63 (1988).
57. K. Kijima, H. Noguchi, and M. Konishi, "Sintering of Ultrafine SiC Powders Prepared by Plasma CVD," J. Mater. Sci., 24, 2924-33 (1989).
58. Morrell; p. 90 in Handbook of Properties of Technical and Engineering Ceramics, Part I. Her Majesty's Stationery Office, London, Great Britain, 1989.