Sinter-forging of nanocrystalline zirconia: I, experimental

Journal of the American Ceramic Society

Volumn 80, Issue 1, 1997, Pages 149-156

  Hague, Douglas C ^a,b,c   Mayo, Merrilea J ^a,b  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b AMERICAN CERAMIC SOCIETY   (United States)

^c PRATT AND WHITNEY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DENSIFICATION; GRAIN GROWTH; NANOSTRUCTURED MATERIALS; PLASTIC DEFORMATION; POROSITY; SINTERING; STRAIN RATE;

PLASTIC STRAIN; SINTER FORGING;

ZIRCONIA;

EID: 0030832376     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.1997.tb02803.x     Document Type: Article

References (35)

1. 2," Scr. Metall. Mater., 26 [5] 791-96 (1992).
2. D. M. Owen and A. H. Chokshi, "An Evaluation of the Densification Characteristics of Nanocrystalline Materials," Nanostruct. Mater., 2 [2] 181-87 (1993).
3. 2,"; pp. 539-45 in Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures. Edited by M. Nastasi, D. M. Parkin, and H. Gleiter. Kluwer, Boston, MA, 1993.
4. D. C. Hague and M. J. Mayo, "The Effect of Crystallization and a Phase Transformation on the Grain Growth of Nanocrystalline Titania," Nanostruct. Mater., 3 [1-6] 61-67 (1993).
5. M. J. Mayo and D. C. Hague, "Processing Nanocrystalline Ceramics for Applications in Superplasticity," Mater. Sci. Eng. A, 166 [1-2] 145-59 (1993).
6. R. S. Averback, H. J. Höfler, and R. Tao, "Processing of Nano-Grained Materials," Mater. Sci. Eng. A, 166 [1-2] 169-77 (1993).
7. M. M. R. Boutz, A. J. A. Winnubst, A. J. Burggraaf, M. Nauer, and C. Carry, "Low Temperature Sinter Forging of Nanostructured Y-TZP"; pp. 275-83 in Science and Technology of Zirconia V. Edited by S. Badwal, J. Bannister, and R. Hannink. Technomic Publishing Co., Lancaster, PA, 1993.
8. A. J. A. Winnubst, Y. J. He, P. M. V. Bakker, R. J. M. Olde Scholtenhuis, and A. J. Burggraaf, "Sinter Forging as a Tool for Improving the Microstructure and Mechanical Properties of Zirconia Toughened Alumina"; pp. 284-91 in Science and Technology of Zirconia V. Edited by S. Badwal, J. Bannister, and R. Hannink. Technomic Publishing Co., Lancaster, PA, 1993.
9. 3 Powders," J. Am. Ceram. Soc., 78 [2] 491-94 (1995).
10. G. Skandan, H. Hahn, B. H. Kear, M. Roddy, and W. R. Cannon, "Processing of Nanostructured Zirconia Ceramics"; pp. 207-12 in Materials Research Society Symposia Proceedings, Vol. 351, Molecularly Designed Ultrafine/Nanostructured Materials. Edited by K. E. Gonsalves, G.-M. Chow, T. D. Xiao, and R. C. Cammarata. Materials Research Society, Pittsburgh, PA, 1994.
11. G. Skandan, H. Hahn, B. H. Kear, M. Roddy, and W. R. Cannon, "The Effect of Applied Stress on Densification of Nanostructured Zirconia During Sinter-Forging," in progress.
12. M. J. Mayo and D. C. Hague, "Superplastic Sinter-Forging of Nanocrystalline Ceramics"; pp. 141-46 in Materials Science Forum, Vol. 170-172, Superplasticity in Advanced Materials ICSAM-94. Edited by T. G. Langdon. Trans Tech Publishing, Aedermannsdorf, Switzerland, 1994.
13. M. M. R. Boutz, L. Winnubst, and A. J. Burggraaf, "Low Temperature Sinter Forging of Nanostructured Y-TZP and YCe-TZP," J. Am. Ceram. Soc., 78 [1] 121-28 (1995).
14. M. Çiftçioglu and M. J. Mayo, "Processing of Nanocrystalline Ceramics"; pp. 77-86 in Materials Research Society Symposia Proceedings, Vol. 196, Superplasticity in Metals, Ceramics, and Intermetallics. Edited by M. J. Mayo, M. Kobayashi, and J. Wadsworth. Materials Research Society, Pittsburgh, PA, 1990.
15. D.-J. Chen, "Densification and Microstructural Evolution in Nanocrystalline Yttria-Stabilized Zirconia Ceramics"; M.S. Thesis. Pennsylvania State University, University Park, PA, 1994.
16. K. R. Venkatachari and R. Raj, "Shear Deformation and Densification of Powder Compacts," J. Am. Ceram. Soc., 69 [6] 499-506 (1986).
17. P. C. Panda, J. W. Wang, and R. Raj, "Sinter-Forging Characteristics of Fine-Grained Zirconia," J. Am. Ceram. Soc., 71 [12] C-507-C-509 (1988).
18. D. C. Hague, "Sinter-Forging of Nanocrystalline Ceramics"; Ph.D. Thesis. Pennsylvania State University, University Park, PA, 1995.
19. 2," J. Am. Ceram. Soc., 69, 325-32 (1986).
20. B. D. Cullity, Elements of X-ray Diffraction, 2nd ed., pp. 99-103. Addison-Wesley, Reading, MA, 1978.
21. S. Lowell and J. E. Shields, Powder Surface Area and Porosity, 3rd ed. Chapman and Hall, New York, 1991.
22. B. J. Kellet and F. F. Lange, "Experiments on Pore Closure During Hot Isostatic Pressing and Forging," J. Am. Ceram. Soc., 71 [1] 7-12 (1988).
23. D. C. Hague and M. J. Mayo, "Sinter-Forging of Nanocrystalline Zirconia: II, Simulation," unpublished work.
24. D. C. Hague and M. J. Mayo, "Sinter-Forging of Nanocrystalline Titania," J. Mater. Res., unpublished work.
25. B. Budiansky, J. W. Hutchinson, and S. Slutsky, "Void Growth and Collapse in Viscous Solids"; pp. 13-45 in Mechanics of Solids: The Rodney Hill 60th Anniversary Volume. Edited by H. G. Hopkins and M. J. Sewell. Pergamon Press, New York, 1982.
26. H. A. Kuhn and B. L. Ferguson, Powder Forging. Metal Powder Industries Federation, Princeton, NJ, 1990.
27. T. K. Gupta, "Possible Correlation Between Density and Grain Size During Sintering," J. Am. Ceram. Soc., 55 [5] 276-77 (1972).
28. S. C. Samanta and R. L. Coble, "Correlation of Grain Size and Density During Intermediate-Stage Sintering of Ag," J. Am. Ceram. Soc., 55 [11] 583 (1972).
29. C. P. Cameron and R. Raj, "Grain Growth Transition During Sintering of Colloidally Prepared Alumina Powder Compacts," J. Am. Ceram. Soc., 71 [12] 1031-35 (1988).
30. E. B. Slamovich and F. F. Lange, "Densification of Large Pores: I, Experiments," J. Am. Ceram. Soc., 75 [9] 2498-508 (1992).
31. R. J. Brook, "Controlled Grain Growth"; pp. 331-64 in Treatise an Materials Science and Technology 9-Ceramic Fabrication Processes. Edited by F. F. Y. Wang. Academic Press, New York, 1976.
32. C. H. Cáceres and D. S. Wilkinson, "Large Strain Behavior of Superplastic Copper Alloy - I. Deformation," Acta Metall., 32 [3] 415-22 (1984).
33. Y.-I. Yoshizawa and T. Sakuma, "High-Temperature Deformation and Grain Growth in Fine-Grained Zirconia," Eng. Fract. Mech., 40 [415] 847-54 (1991).
34. H. Hahn, R. S. Averback, H. J. Höfler, and J. Logas, "Sintering and Deformation of Nanocrystalline Ceramics"; pp. 569-80 in Materials Research Society Symposia Proceedings, Vol. 206, Clusters and Cluster-Assembled Materials. Edited by R. S. Averback, J. Bernholc, and D. L. Nelson. Materials Research Society, Pittsburgh, PA, 1991.
35. H. Hahn and R. S. Averback, "Low Temperature Creep of Nanocrystalline Titanium(IV) Oxide," J. Am. Ceram. Soc., 74, 2918-21 (1991).