High strength hot-dip galvanized steel grades: A critical comparison of alloy design, line configuration and properties

Ironmaking and Steelmaking

Volumn 30, Issue 6, 2003, Pages 21-31

  Pichler, A ^b   Traint, S ^b   Arnolder, G ^b   Stiaszny, P ^b   Blaimschein, M ^b   Werner, E A ^a  

^a TECHNICAL UNIVERSITY OF MUNICH   (Germany)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; COMPOSITION; DENSITY (SPECIFIC GRAVITY); ELASTICITY; FORMABILITY; GALVANIZED METAL; IRON AND STEEL INDUSTRY; METALLOGRAPHIC MICROSTRUCTURE; STEEL SHEET; STIFFNESS; STRENGTH OF MATERIALS; YIELD STRESS; AGE HARDENING; CORROSION RESISTANCE; TEMPERATURE; WELDABILITY;

ANNEALING TEMPERATURE; HIGH STRENGTH GALVANIZED STEEL; HOT-DIP GALVANIZED STEEL;

STEEL; STEEL SHEET;

BAKE HARDENING; HOT-DIP GALVANIZED STEEL GRADES; SECONDARY COLD WORK EMBRITTLEMENT; SOLID SOLUTION HARDENING; TRANSFORMATION INDUCED PLASTICITY STEELS;

EID: 0142155124     PISSN: 03019233     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (43)

1. M. Ashby, "Materials Selection in Mechanical Design," Pergamon Press, 1992.
2. P. Stiaszny et al., "Influence of Annealing Technology on the Material Properties of LC and ULC Steel Grades," International Symposium: Modern LC and ULC Sheet Steels for Cold Forming, Department of Ferrous Metallurgy, RWTH Aachen University of Technology, 1998, p. 225.
3. N. Ohashi et al., "Development of Cold-Rolled High Strength Sheet with Excellent Deep Drawability," SAE Technical Paper Series (810027), 1981.
4. A. Pichler et al., "High Strength IF Steels: Production, Parameters and Properties," International Forum for Physical Metallurgy of IF Steels IF.IFS-94, Iron and Steel Institute of Japan, 1994, p. 249.
5. L. Meyer, W. Bleck, and W. Müschenborn, "Product-Oriented IF Steel Design," International Forum for Physical Metallurgy of IF Steels, IF.IFS-94, Iron and Steel Institute of Japan, 1994, p. 203.
6. M. Blaimschein et al., "Bake Hardening Effects in Components," Advanced Sheet Metalforming, Proceedings of the 19th Biennial IDDRG Congress, University of Miskolce, 1996, p. 445.
7. T. Davenport, "Formable HSLA and Dual-Phase Steels," The Metallurgical Society of AIME, 1979.
8. R.A. Kot and J.W. Morris, "Structure and Properties of Dual-Phase Steels," The Metallurgical Society of AIME, 1979.
9. O. Matsumara, Y. Sakuma, and H. Takeuchi, "TRIP and its Kinetic Aspects in Austempered 0.4 C-1.5 Si-0.8 Mn Steel," Scripta Met., Vol. 21, 1987, p. 1,301.
10. O. Matsumura, Y. Sakuma and H. Takeuchi, "Enhancement of Elongation by Retained Austenite in Intercritical Annealed 0.4 C-1.5 Si-0.8 Mn Steel," Transaction ISIJ, Vol. 27, 1987, p. 570.
11. V.E. Zackay et al., "The Enhancement of Ductility in High Strength Steels," ASM Trans. Quart., Vol. 60, 1967, p. 252.
12. M. Kurihara et al., "Reduction Heating Technology of Steel Sheets by Direct Fire," Development in the Annealing of Sheet Steels, The Minerals, Metals and Materials Society, 1992, p. 117.
13. T. Kaihara et al., "New Technology in KM-CAL for Sheet Gauge," Development in the Annealing of Steel Sheets, The Minerals, Metals and Materials Society, 1992, p. 79.
14. K. Ushioda et al., "Metallurgical Investigations for Producing Non-Aging Deep-Drawable Low Carbon Al-Killed Steel Sheets by Continuous Annealing," Development in the Annealing of Steel Sheets, The Minerals, Metals and Materials Society, 1992, p. 261.
15. E.F. Walker and R.C. Hudd, "Annealing Treatment of Extra Low and Ultra Low Carbon Steels," International Symposium: Modern LC and ULC Sheet Steels for Cold Forming, Department of Ferrous Metallurgy, RWTH Aachen University of Technology, 1998, p. 211.
16. O. Hamart, T. Iung and S. Lanteri, Study of Mechanical Properties and Precipitation in High Strength IF Steels, Mechanical Working and Steel Processing Conference Proceedings, ISS, Vol. 36, 1998, pp. 189-194.
17. A. Pichler et al., "High Strength IF Steels: Production Parameters and Properties," Physical Metallurgy of IF Steels IF-IFS-94, Iron and Steel Institute of Japan, 1994, p. 249.
18. T. Irie et al., "Development of Deep Drawable and Bake-Hardenable High Strength Steel Sheet by Continuous Annealing of Extra Low Carbon Steel with Nb or Ti and P," Metallurgy of Continuous Annealed Sheet Steel, The Metallurgical Society of AIME, 1982, p. 155.
19. A. Pichler et al., "Hot-Dip Galvanized Bake-Hardening Grades: A Comparison Between LC and ULC Concepts," Mechanical Working and Steel Processing Conference, ISS Vol. 35, 1998, pp. 63-81.
20. W. Bleck et al., "Metallurgical Design of High Strength ULC Steels," High Strength Sheet Steels for the Automotive Industry, ISS and AIME, 1994, p. 141.
21. S. Van Snick et al., "Influence of Carbon Content and Coiling Temperature on Hot and Cold-Rolled Properties of Bake Hardenable Nb - ULC Steels," Mechanical Working and Steel Processing Conference, ISS, Vol. 35, 1998, pp. 225-232.
22. W. Bleck et al., "Höherfestes kaltgewalztes Feinblech aus phosphorlegierten Stählen mit Dualphasengefüge," Stahl und Eisen, Vol. 106, 1986, p. 1,381.
23. T. Irie et al., "Metallurgical Factors Affecting the Formability of Cold-Rolled High Strength Steel Sheets," Transaction ISIJ, Vol. 21, 1981, p. 793.
24. T. Furukawa et al., "Process Factors for Cold-Rolled Dual-Phase Sheet Steels," Transaction ISIJ, Vol. 21, 1981, p. 812.
25. X.P. Shen and R. Priestner, "Effect of Boron on the Microstructure and Tensile Properties of Dual-Phase Steel," Met. Trans., Vol. 21A, 1990, p. 2,547.
26. N.R.V. Banguru and A.K. Sachdev, "Influence of Cooling Rate on the Microstructure and Retained Austenite in an Intercritically Annealed Vanadium Containing HSLA Steel," Met. Trans., Vol. 13A, 1982, p. 1,899.
27. A. Pichler et al., "Aspects of the Production of Dual-Phase and Multi-Phase Steel Strip," Mechanical Working and Steel Processing Conference Proceedings, ISS, Vol. 37, 1999, p. 37.
28. A. Pichler et al., "Phase Transformation During Annealing of a Cold-Rolled Dual-Phase Steel Grade," Mechanical Working and Steel Processing Conference Proceedings, ISS, Vol. 38, 2000, pp. 573-593.
29. T. Akbay and C. Atkinson, "The Influence of Diffusion of Carbon in Ferrite as well as in Austenite on a Model of Reaustenization from Ferrite/Cementite Mixtures in Fe-C Steels," Journal of Material Science, Vol. 31, 1996, p. 2,221.
30. T. Minote et al., "Modeling of Transformation Behavior and Compositional Partitioning in TRIP Steel," ISIJ International, Vol. 36, 1996, p. 201.
31. T. Minote et al., "Modeling of Transformation Behavior and Compositional Partitioning in TRIP Steel," ISIJ International, Vol. 36, 1997, p. 201.
32. O. Matsumura, Y. Sakuma and H. Takechi, "Retained Austenite in 0.4 C-Si-1.2 Mn Steel Sheet Intercritically Heated and Austempered," ISIJ International, Vol. 32, 1992, p. 1,014.
33. Y. Sakuma, O. Matsumura and H. Takechi, "Mechanical Properties and Retained Austenite in Intercritically Heat-treated Bainite Transformed Steel and Their Variation with Si and Mn Additions," Met. Trans., Vol. 22A, 1991, p. 489.
34. Y. Sakuma, O. Matsumura and O. Akisue, "Influence and Annealing Temperature on Microstructure and Mechanical Properties of 400°C Transformed Steel Containing Retained Austenite," ISIJ International, Vol. 31, 1991, p. 1,348.
35. K. Sugimoto et al., "Effects of Volume Fraction and Stability of Retained Austenite on Ductility of TRIP-aided Dual-Phase Steels," ISIJ International, Vol. 32, 1992, p. 1,311.
36. K. Sugimoto, M. Kobayashi and S. Hashimoto, "Ductility and Strain-Induced Transformation in a High Strength Transformation-Induced Plasticity-Aided Dual-Phase Steel," Met. Trans., Vol. 23A, 1992, p. 3,085.
37. K. Sugimoto et al., "Effects of Second-Phase Morphology on Retained Austenite Morphology and Tensile Properties in a Trip-aided Dual-Phase Steel Sheet," ISIJ International, Vol. 33, 1993, p. 775.
38. W. C. Jeong, D. K. Matlock and G. Krauss, "Observation of Deformation and Transformation Behavior of Retained Austenite in a 0.14 C-1.2 Si- 1.5 Mn Steel with Ferrite-Bainite-Austenite Structure," Mater. Sci. Enging., Vol. A165, 1993, p. 1.
39. W.C. Jeong, D. K. Matlock and G. Krauss, "Effects of Tensile-Testing Temperature on Deformation and Transformation Behavior of Retained Austenite in a 0.14 C-1.2 Si-1.5 Mn Steel with Ferrite-Bainite-Austenite Structure," Mater. Sci. Enging., Vol. A165, 1993, p. 9.
40. A. Itami, M. Takahashi and K. Ushioda, "Plastic Stability of Retained Austenite in the Cold-Rolled 0.14% C-1.9% Si-1.7% Mn Sheet Steel," ISIJ International, Vol. 35, 1995, p. 1,121.
41. S. Traint et al., "Influence of Manganese, Silicon and Aluminum on the Transformation Behavior of Low Alloyed TRIP Steels," Mechanical Working and Steel Processing Conference Proceedings, ISS, Vol. 38, 2000, p. 549-561.
42. S. Traint et al., "Mechanical Properties and Phase Transformations of an Aluminum Alloyed TRIP Steel," Mechanical Working and Steel Processing Conference Proceedings, ISS, Vol. 39, 2001, pp. 449-467.
43. A. Pichler et al., "Processing and Properties of Cold-Rolled TRIP Steels," Mechanical Working and Steel Processing Conference Proceedings, ISS, Vol. 39, 2001, pp. 411-434.