Review: Measurement of elongational flows in ceramic processing

Journal of the European Ceramic Society

Volumn 17, Issue 10, 1997, Pages 1173-1183

  Greener, J ^a,b   Evans, J R G ^a  

^a BRUNEL UNIVERSITY   (United Kingdom)

^b MARS INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0043044834     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0955-2219(96)00227-0     Document Type: Review

References (72)

1. Edirisinghe, M. J. and Evans, J. R. G., Review: Fabrication of engineering ceramics by injection moulding 1. Materials selection. Int. J. High Tech. Ceramics, 1986, 2, 1-31.
2. Petrie, C. J. S., Elongational Flows. Pitman Press, London 1979, pp. 1-13.
3. 4-SiC composites. ASME Tech. pap. 88-GT-193, 1988, 1-6.
4. Zhang, T., Evans, J. R. G. and Bevis, M. J. The control of fibre orientation in moulded ceramic composites. Composites Part A: Applied Science and Manufacturing, 1997, 28, 339-346.
5. Yajima, S., Hasegawa, Y., Hayashi, J. and Timura, M., Synthesis of continuous silicon carbide fibre with high tensile strength and high Young's modulus 1. Synthesis of polycarbosilane as precursors. J. Mater. Sci., 1978, 13, 2569-2576.
6. Yajima, S., Special heat-resistivity materials from organometallic polymers. Bull Amer. Ceram. Soc., 1983, 62, 893-898.
7. Wallenberger, F. T., Weston, N. E. and Dun, S. A., Inviscid melt spinning: as-spun crystalline alumina fibres. J. Mater. Res., 1991, 5, 2682-2686.
8. Cass, R. B., Fabrication of continuous ceramic fibre by the viscous suspension spinning process. Bull. Amer. Ceram. Soc., 1991, 70, 424-429.
9. Dhingra, A. K., Alumina fibre FP. Phil. Trans. Roy. Soc. Lon. A, 1980, 249, 411-417.
10. Halloran, J. W., Hodge, J., Chandler, D., Klemptner, L. J., Neal, M., Parish, M., Park, H. and Pathare, V., Fabrication and properties of high temperature superconducting wire by the green fibre method. J. Amer. Ceram. Soc., 1992, 75, 903-907.
11. Nunn, S. D., Popovic, D., Baskaran, S., Halloran, J. W., Subramanian, G. and Bike, S. G., Suspension dry spinning and rheological behaviour of ceramic powder loaded polymer solutions. J. Amer. Ceram. Soc., 1993, 76, 2460-2464.
12. Saggio Woyansky, J., Scott, C. E. and Minnear, W. P., Processing of porous ceramics. Bull. Amer. Ceram. Soc., 1992, 71, 1674-1682.
13. Minnear, W. P., Processing of foamed ceramics. In Ceramic Transactions Vol. 26, Forming Science and Technology for Ceramics, ed. M. J. Cima. Amer. Ceram. Soc. Westerville, Ohio, 1992, pp. 149-156.
14. Powell, S. J. and Evans, J. R. G., The structure of ceramic foams prepared from polyurethene-ceramic suspensions. Mater, and Manuf. Proc., 1995, 30, 757-771.
15. Williams, E. J. A. E. and Evans, J. R. G., Expanded ceramic foam. J. Mater. Sci., 1996, 31, 559-563.
16. Guy, R. C. E. and Evans, J. R. G., The direct expansion of ceramic foams. Brit. Ceram. Trans. (in press).
17. Haunton, K. M., Wright, J. K. and Evans, J. R. G., The vacuum forming of ceramics. Br. Ceram. Trans. J., 1990, 89, 53-56.
18. Kobayashi, K., Furuta, M. and Maeno, Y., Euro. Pat. 0034056 19 August 1981, Assigned to NGK Insulators.
19. Hammond, P. and Evans, J. R. G., On the blow moulding of ceramics. J. Mater. Sci. Lett., 1991, 10, 294-296.
20. Greener, J. and Evans, J. R. G., The film blowing of ceramics. J. Mater. Sci., 1993, 28, 6190-6194.
21. Dealy, J. M., Extensional flow of non-Newtonian fluids - A Review. Polym. Eng. Sci., 1971, 11, 433-445.
22. Jones, D. M., Walters, K. and Williams, P. R., On the extensional viscosity of mobile polymer solutions. Rheol. Acta, 1987, 26, 20-30.
23. Dealy, J. M., Official nomenclature for material functions describing the response of a viscoelastic fluid to various shearing and elongational deformations. J. Rheol., 1984, 28, 181-195.
24. Trouton, F. T., On the coefficient of viscous traction and its relation to that of viscosity. Proc. Roy. Soc., A, 1906, 77, 426-440.
25. 3-filled polystyrene melts. Proc. Japan Soc. Rheol., 1990, 18, 190-195.
26. Greener, J. and Evans, J. R. G., Factors affecting the extensional flow of crowded suspensions for the manufacture of thin-wall ceramic bodies. In Flow and Microstructure of Dense Suspensions, ed. L. J. Struble. C. F. Zukoski and G. G. Maitland. MRS Symp. Proc., 1992, 289, 103-108.
27. Greener, J. and Evans, J. R. G., Uniaxial flow of particle-filled polymer melts, to be published.
28. Greener, J. and Evans, J. R. G., Biaxial flow of filled polyisobutylene, to be published.
29. Collyear, A. A and Clegg, D. W., Rheological Measurement. Elsevier Applied Science, London, 1981, p. 239
30. Vinogradov, G. V. Radushkevich, B. V. and Fikhman, V. D., Extension of elastic liquids: Polyisobutylene. J. Polym. Sci., 1970, 8, A-2 1-17.
31. Ballman, R. L., Extensional flow properties of polystyrene melt. Rheol. Acta, 1965, 4, 137-146.
32. Meissner, J., Polymer melt elongation - methods, results and recent developments. Polym. Engng. Sci., 1987, 27, 537-546.
33. Laun, H. M. and Münstedt, H., Comparison of the elongational behaviour of a polyethylene melt at constant stress and constant strain rate. Rheol. Acta, 1976, 15, 517-524.
34. Agrawal, P. K. et al., Rheological behaviour of molten polymers in shearing and in extensional flows. Trans. Soc. Rheol, 1977, 21, 355-379.
35. Muller, R. and Froelich, D., New extensional rheometer for elongational viscosity and flow birefringence measurements: Some results on polystyrene melts. Polymer, 1985, 26, 1477-1482.
36. Froelich, D., Muller, R. and Zang, Y. H., New extensional rheometer for elongated viscosity and flow birefringence measurements: Experimental results and interpretation. Rubber Chemistry and Technology, 1986, 59, 564-573.
37. Cogswell, F. N., The rheology of polymer melts under tension. Plast. & Polym., 1968, 36, 109-111.
38. Vinogradov, G. V., Radushkevich, B. V. and Fikhman, V. D., Uniaxial extension of polystyrene at true constant stress, Rheol. Acta, 1972, 11, 286-291.
39. Baily, E. D., New extensional viscosity measurement on polyisobutylene. Trans. Soc Rheol., 1974, 18, 635-640.
40. Spearot, J. A. and Metzner, A. B., Isothermal spinning of molten polyethylenes. Trans. Soc. Rheol., 1972, 16, 495-518.
41. Chen, Z. and Papanastisiou, T. C., Elongational viscosity by fibre spinning. Rheol Acta, 1990, 29, 385-389.
42. Cogswell, F. N., Converging flow of polymer melts in extrusion dies. Polym. Eng. Sci., 1971, 11, 433-445.
43. Shroff, R. N., Cancio, L. V. and Shida, M., Extensional flow of polymer melts. Trans. Soc. Rheol., 1971, 21, 429-446.
44. Kwag, C. and Vlachapoulos, J., An assessment of Cogswell's method for measurement of extensional viscosity. Polym. Eng. Sci. 1991, 31, 1015-1021.
45. Walters, K., Rheometry. Chapman and Hall, London, 1975, pp. 210-233.
46. Denson, C. D. and Gallo, R. J., Measurement on the biaxial extension viscosity of bulk polymers: The inflation of thin polymer sheet. Polym. Eng. Sci., 1971, 11, 174-176.
47. Joye, D. D., Poehlin, G. W. and Denson, C. D., A bubble inflation technique for the measurement of viscoelastic properties in equal biaxial extensional flow. Trans. Soc. Rheol., 1973, 16, 287-302.
48. Joye, D. D., Poehlin, G. W. and Denson, C. D., A bubble inflation technique for the measurement of viscoelastic properties in equal biaxial extensional flow II. Trans. Soc. Rheol., 1973, 17, 287-302.
49. Maerker, J. M. and Schowalter, W. R., Biaxial tension of an elastic liquid. Rheol. Acta, 1974, 13, 627-638.
50. Denson, C. D. and Hylton, D. C., A rheometer for measuring the viscoelastic response of polymer melts in arbitrary planar and biaxial extensional flow fields. Polym. Eng. Sci., 1980, 20, 535-539.
51. Yang, M. C. and Dealy, J. M., Control of strain rate in a sheet inflation rheometer. J. Rheol., 1987, 31, 113-120.
52. Ess, J. W., Hornsby, P. R., Lin, S. Y. and Bevis, M. J., Characterization of dispersion in mineral-filled thermoplastic compounds. Plast. Rubb. Proc. Appln, 1984, 4, 7-14.
53. Stephenson, S. E. and Meissner, J., Large homogeneous biaxial extension of polyisobutylene and comparison with uniaxial behaviour. Proc. 8th Int. Cong. on Rheology, ed. G. Astarita and G. Marruci, Vol. 2. Plenum, New York, 1980, pp. 431-436.
54. Meissner, J., Raible, T. and Stephenson, S. E., Rotary clamp uniaxial and biaxial extensional rheometry of polymer melts. J. Rheol., 1981, 25, 1-28.
55. Demarmals, A. and Meissner, J., Multiaxial elongation of polyisobutylene with various and changing strain rate ratios. Rheol. Acta, 1985, 24, 253-259.
56. van Aken, J. A. and Janeschitz-Kriegel, H., New apparatus for the simultaneous measurement of stresses and flow birefringence in biaxial extension of polymer melts. Rheol. Acta, 1980, 19, 744-752.
57. Chatraei, S., Macosko, C. W. and Winter, H. H., Lubricated squeezing flow: A new biaxial rheometer. J. Rheol., 1981, 25, 433-143.
58. Sosky, P. R. and Winter, H. H., Equibiaxial extension of two polymer melts: Polystyrene and low density polyethylene. J. Rheol., 1985, 29, 493-517.
59. Khan, S. A., Prudhomme, R. K. and Larson, R. G., Comparison of the rheology of polymer melts in shear, biaxial, and uniaxial extensions. Rheol. Acta, 1987, 26, 144-151.
60. Hsu, T. C. and Harrison, I. R., Measurement of equibiaxial elongational viscosity of polystyrene using lubricated squeezing flow. Polym. Eng. Sci., 1991, 31, 223-230.
61. Takahashi, M., Isaki, T., Takigawa, T. and Masuda, T., Measurement of uniaxial and biaxial extensional flow behaviour of polymer melts at constant strain rates. J. Rheol., 1993, 37, 827-846.
62. Lee, S. J. and Peleg, M., Lubricated and non-lubricated squeezing flow of a double layered array of two power law liquids. Rheol. Acta, 1990, 29, 360-365.
63. Papanastisiou, A. C., Macasko, C. W. and Scriven, L. E., Analysis of lubricated squeezing flow. Inter. J. Num. Methods in Fluids, 1986, 6, 819-839.
64. Tordella, J. P., Capillary flow of molten polyethylene - A photographic study of melt fracture. Trans. Soc. Rheol., 1957, 1, 203-212.
65. Tordella, J. P., Unstable flow of molten polymers: A second site of melt fracture. J Appl. Polym. Sci., 1963, 7, 215-229.
66. Begonzoni, A. and DiCresce, A. J., The phenomenon of draw resonance in polymeric melts. Polym. Eng. Sci., 1966, 6, 45-49.
67. Boudreaux, E. and Cuculo, J. A., Polymer flow instability: A review and analysis. J. Macromol. Sci. - Rev. Macromol. Chem., 1977-78, C16(1), 39-77.
68. Busse, W. F., Mechanical structures in polymer melts, I. Measurements of melt strength and elasticity. J. Polym. Sci., 1967, 5, 1249-1259.
69. Wissbrun, K. F., Interpretation of the 'Melt Strength'. Polym. Eng. Sci., 1973, 13, 342-345.
70. Everage, A. E. and Ballman, R. L., A mechanism for polymer melt or solution fracture. J. Appl. Polym. Sci., 1974, 18, 993-937.
71. Montes, S. A. and Ramirez, J. L., The use of melt strength of low density polyethylene as a processability measure in film blowing extrusion. Polym. Eng. Sci., 1986, 26, 388-392.
72. Rabin, Y., Polymer fracture in steady and transient elongational flows. J. Chem. Phys., 1987, 86, 5215-5216.