Analysis of composite plates using higher-order shear deformation theory and a finite point formulation based on the multiquadric radial basis function method

Composites Part B: Engineering

Volumn 34, Issue 7, 2003, Pages 627-636

  Ferreira, A J M ^a   Roque, C M C ^a   Martins, P A L S ^a  

^a UNIVERSITY OF PORTO   (Portugal)

Author keywords

A. Laminates; A. Plates; Finite point formulation

Indexed keywords

PLATES (STRUCTURAL COMPONENTS); SHEAR DEFORMATION; SHEAR STRESS;

COMPOSITE PLATES;

LAMINATED COMPOSITES;

EID: 0042229158     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-8368(03)00083-0     Document Type: Article

References (65)

1. Reissner E., Stavsky Y. Bending and stretching of certain types of aelotropic elastic plates. J Appl Mech. 28:1961;402-408.
2. Stavsky Y. Bending and stretching of laminated aelotropic plates. J Engng Mech, ASCE. 87:(EM6):1961;31-56.
3. Dong S.B., Pister K.S., Taylor R.L. On the theory of laminated anisotrophic plates and shells. J Aeronaut Sci. 29:(8):1962;969-975.
4. Yang P.C., Norris C.H., Stavsky Y. Elastic wave propagation in heterogeneous plates. Int J Solids Struct. 2:1966;665-684.
5. Ambartsumyan S.A. Theory of anisotropic plates. 1969;Technomic, Stamford, CT. (translated from Russian).
6. Whitney J.M., Leissa A.W. Analysis of heterogeneous anisotropic plates. J Appl Mech. 36:(2):1969;261-266.
7. Whitney J.M. The effect of transverse shear deformation in the bending of laminated plates. J Compos Mater. 3:1969;534-547.
8. Whitney J.M., Pagano N.J. Shear deformation in heterogeneous anisotropic plates. J Appl Mech. 37:(4):1970;1031-1036.
9. Reissner E. A consistent treatment of transverse shear deformations in laminated anisotropic plates. AIAA J. 10:(5):1972;716-718.
10. Reissner E. The effect of transverse shear deformations on the bending of elastic plates. J Appl Mech. 12:1945;A69-A77.
11. Reddy J.N. Energy and variational methods in applied mechanics. 1984;Wiley, New York.
12. Ferreira A.J.M. A formulation of the multiquadric radial basis function method for the analysis of laminated composite plates. Compos Struct. 59:(3):2003;385-392.
13. Reddy J.N. Mechanics of laminated composite plates. 1997;CRC Press, New York.
14. Sun C.T. Theory of laminated plates. J Appl Mech. 38:1971;231-238.
15. Whitney J.M., Sun C.T. A higher order theory for extensional motion of laminated anisotrophic shells and plates. J Sound Vib. 30:1973;85-97.
16. Mau S.T. A refined laminate plate theory. J. Appl Mech. 40:1973;606-607.
17. Lo K.H., Christensen R.M., Wu E.M. A high-order theory of plate deformation. Part 1: Homogeneous plates. J Appl Mech. 44:(7):1977;663-668.
18. Lo K.H., Christensen R.M., Wu E.M. A high-order theory of plate deformation. Part 2: Laminated plates. J Appl Mech. 44:(4):1977;669-676.
19. Reddy J.N. A simple higher-order theory for laminated composite plates. J Appl Mech. 51:1984;745-752.
20. Reddy J.N. A refined nonlinear theory of plates with transverse shear deformation. Int J Solids Struct. 20:(9/10):1984;881-906.
21. Randles P.W., Libersky L.D. Smoothed particle hydrodynamics: some recent improvements and applications. Comp Meth Appl Mech Engng. 139:1996;375-408.
22. Belystschko T., Krongauz Y., Organ D., Fleming M., Krysl P. Meshless methods: an overview and recent developments. Comp Meth Appl Mech Engng. 139:1996;3-47.
23. Bonet J., Kulasegaram S. Correction and stabilization of smooth particle hydrodynamics methods with applications in metal forming simulations. Int J Numer Meth Engng. 47:2000;1189-1214.
24. Nayroles B., Touzot G., Villon P. Generalizing the finite element method: diffuse approximation and diffuse elements. Comput Mech. 10:1992;307-318.
25. Belytschko T., Lu Y.Y., Gu L. Element free galerkin methods. Int J Numer Meth Engng. 37:1994;229-256.
26. Ponthot J.P., Belytschko T. Arbitrary Lagrangian-Eulerian formulation for element-free galerkin method. Comp Meth Appl Mech Engng. 152:1998;19-46.
27. William B., Saigal S. A three-dimensional element-free galerkin elastic and elastoplastic formulation. Int J Numer Meth Engng. 46:1999;671-693.
28. Liu W.K., Jun S., Zhang Y.F. Reproducing kernel particle method. Int J Numer Meth Fluids. 20:1995;1081-1106.
29. Liu W.K., Jun S., Li S., Adee J., Belytschko T. Reproducing kernel particle methods for structural dynamics. Int J Numer Meth Engng. 38:1995;1655-1679.
30. Liu W.K., Jun S. Multiple-scale reproducing kernel particle methods for large deformation problems. Int J Numer Meth Engng. 41:1998;1339-1362.
31. Liew K.M., Ng T.Y., Wu Y.C. Meshfree method for large deformation analysis a reproducing kernel particle approach. Engng Struct. 24:2002;543-551.
32. Liew K.M., Ng T.Y., Zhao X., Reddy J.N. Harmonic reproducing kernel particle method for free vibration of rotating cylindrical shells. Comp Meth Appl Mech Engng. 191:2002;4141-4157.
33. Liew K.M., Wu H.Y., Ng T.Y. Meshless method for modeling of human proximal femur: treatment of nonconvex boundaries and stress analysis. Comput Mech. 28:2002;390-400.
34. Duarte C.A., Oden J.T. An hp adaptive method using clouds. Comp Meth Appl Mech Engng. 139:1996;237-262.
35. Hardy R.L. Multiquadric equations of topography and other irregular surfaces. Geophys Res. 176:1971;1905-1915.
36. Hardy R.L. Theory and applications of the multiquadric-biharmonic method: 20 years of discovery. Comput Math Appl. 19:(8/9):1990;163-208.
37. Kansa E.J. Multiquadrics - a scattered data approximation scheme with applications to computational fluid dynamics. i: Surface approximations and partial derivative estimates. Comput Math Appl. 19:(8/9):1990;127-145.
38. Kansa E.J. Multiquadrics - a scattered data approximation scheme with applications to computational fluid dynamics. ii: Solutions to parabolic, hyperbolic and elliptic partial differential equations. Comput Math Appl. 19:(8/9):1990;147-161.
39. Liu G.R. Mesh free methods. 2003;CRC Press, Boca Raton, USA.
40. Powell M.J.D. The theory of radial basis function approximation in 1990. Light F.W. Advances in numerical analysis. 1992;203-240 Oxford University Press.
41. Coleman C.J. On the use of radial basis functions in the solution of elliptic boundary value problems. Comput Mech. 17:1996;418-422.
42. Sharan M., Kansa E.J., Gupta S. Application of the multiquadric method for numerical solution of elliptic partial differential equations. Appl Math Comput. 84:1997;275-302.
43. Wendland H. Error estimates for interpolation by compactly supported radial basis functions of minimal degree. J Approx Theory. 93:1998;258-296.
44. Hon Y.C., Lu M.W., Xue W.M., Zhu Y.M. Multiquadric method for the numerical solution of byphasic mixture model. Appl Math Comput. 88:1997;153-175.
45. Hon Y.C., Cheung K.F., Mao X.Z., Kansa E.J. A multiquadric solution for the shallow water equation. ASCE J Hydraul Engng. 125:(5):1999;524-533.
46. Wang J.G., Liu G.R., Lin P. Numerical analysis of biot's consolidation process by radial point interpolation method. Int J Solids Struct. 39:(6):2002;1557-1573.
47. Liu G.R., Gu Y.T. A local radial point interpolation method (lrpim) for free vibration analyses of 2D solids. J Sound Vib. 246:(1):2001;29-46.
48. Liu G.R., Wang J.G. A point interpolation meshless method based on radial basis functions. Int J Numer Meth Engng. 54:2002;1623-1648.
49. Wang J.G., Liu G.R. On the optimal shape parameters of radial basis functions used for 2D meshless methods. Comp Meth Appl Mech Engng. 191:2002;2611-2630.
50. Ferreira A.J.M. Thick composite beam analysis using a global meshless approximation based on radial basis functions. Mech Adv Mater Struct. 10:(3):2003;271-284.
51. Fasshauer GE. Solving partial differential equations by collocation with radial basis functions. Surface fitting and multiresolution methods, Proceedings of the Third International Conference on Curves and Surfaces, vol. 2, 1997; p. 131-8.
52. Zienkiewicz O.C. The finite element method. 1991;McGraw-Hill.
53. Hughes T.J.R. The finite element method - linear static and dynamic finite element analysis. 2000;Dover, New York.
54. Bathe K.J. Finite element procedures in engineering analysis. 1982;Prentice Hall.
55. Kansa E.J., Hon Y.C. Circunvecting the ill-conditioning problem with multiquadric radial basis functions. Comput Math Appl. 39:(7-8):2000;123-137.
56. Hon Y.C., Mao X.Z. On unsymmetric collocation by radial basis functions. Appl Math Comput. 119:(2-3):2001;177-186.
57. Beatson R.K. Fast fitting of radial basis functions: methods based on preconditioned gmres iteration. Adv Comput Math. 11:1999;253-270.
58. Dubal M.R., Oliveria S.R., Matzner R.A. Domain decomposition and local refinement for multiquadric approximations. i: Second-order equations in one-dimension. J Appl Sci Comp. 1:1994;146-171.
59. Beatson R.K., Light W.A. Fast evaluation of radial basis functions: methods for 2-dimensional polyharmonic splines. IMA J Numer Anal. 17:1997;343-372.
60. Reddy J.N. An introduction to the finite element method. 1993;McGraw-Hill, New York.
61. Akhras G., Cheung M.S., Li W. Finite strip analysis for anisotropic laminated composite plates using higher-order deformation theory. Comput Struct. 52:(3):1994;471-477.
62. Akhras G., Cheung M.S., Li W. Static and vibrations analysis of anisotropic laminated plates by finite strip method. Int J Solids Struct. 30:(22):1993;3129-3137.
63. Pagano N.J. Exact solutions for rectangular bidirectional composites and sandwich plates. J Compos Mater. 4:1970;20-34.
64. Pandya B.N., Kant T. Higher-order shear deformable theories for flexure of sandwich plates - finite element evaluations. Int J Solids Struct. (24):1988;419-451.
65. Srinivas S. A refined analysis of composite laminates. J Sound Vib. 30:1973;495-507.