Contact mechanics of rough surfaces in tribology:Single asperity contact

Applied Mechanics Reviews

Volumn 49, Issue 5, 1996, Pages 275-298

  Bhushan, Bharat ^a  

^a Ohio State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTOPLASTICITY; FINITE ELEMENT METHOD; FRICTION; MATHEMATICAL MODELS; PROBLEM SOLVING; SURFACE ROUGHNESS; SURFACE TENSION; TRIBOLOGY; WEAR OF MATERIALS;

MACROSCOPICALLY FLAT BODIES; MICROROUGHNESS; SINGLE ASPERITY CONTACT;

INTERFACES (MATERIALS);

EID: 0030143410     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3101928     Document Type: Article

References (75)

1. Akyuz FA and Merwin JE (1968), Solution of nonlinear problems of elas-toplasticity by the finite element method, AIAA J 6, 1825-1831.
2. Aleksandrov VM, Babeshko VA, and Kucherov VA (1966), Contact problems for an elastic layer of slight thickness, PrikI Math Mekh 30, 124-142 (in English translation).
3. Bhattacharya AK and Nix WD (1988), Analysis of elastic and plastic deformation associated with indentation testing of thin films on substrate, Int J Solids Struct 24 1287-1298.
4. Bhattacharya AK and Nix WD (1991), Finite element analysis of cone indentation, Int J Solids Struct 27, 1047-1058.
5. Bhushan B (1984), Analysis of the real area of contact between a polymeric magnetic medium and a rigid surface, ASME J Trib 106, 26-34.
6. Bhushan B (1994), Tribology of solid contacts in magnetic recording devices, Appl Mech Rev 47(6), Part II, SI 99-S203.
7. Bhushan B (1996), Tribology and Mechanics of Magnetic Storage Devices, Second Edition, Springer-Verlag, New York.
8. Bhushan B and Gupta BK (1991), Handbook of Tribology: Materials, Coatings, and Surface Treatments, McGraw-Hill, New York.
9. Bhushan B and Blackman GS (1991), Atomic force microscopy of magnetic rigid disks and sliders and its applications to tribology, ASME J Trib 113,452-457.
10. Bowden FP and Tabor D (1950), The Friction and Lubrication of Solids, Part I, Clarendon Press, Oxford.
11. Bowden FP and Tabor D (1964), The Friction and Lubrication of Solids, Part II, Clarendon Press, Oxford.
12. Bufler H (1959), Zur Theorie der Rollenden Reibung, Ing Arch 27, 137.
13. Burmister DM (1945), General theory of stresses and displacements in layered systems, J App! Phys 16, 89-94.
14. Chen WT (1971), Computation of stresses and displacements in a layered elastic medium, Int J Eng Sei 9, 775-800.
15. Chen WT and Engel PA (1972), Impact and contact stress analysis in multilayer media, Int J Solids Struct 8, 1257-1281.
16. Davies RM (1949), Determination of static and dynamic yield stresses using a steel ball, Proc Roy Soc A197, 416-432.
17. Diao DF, Kato K, and Hayashi K (1994), Maximum tensile stress on a hard coating under sliding friction, Trib Int 27, 267-272.
18. Dumas G and Baronet CN (1971), Elastic-plastic indentation of a halfspace by an infinitely long rigid circular cylinder, Int J Mech Sci 13, 519-530.
19. Elsharkawy AA and Hamrock BJ (1993), Numerical solution for dry sliding line contact of multilayered elastic bodies, ASME J Trib 115, 237-245.
20. Engel PA, Hsue EY, and Bayer RG (1993), Hardness, friction and wear of multiplated contacts, Wear 162-164, 538-551.
21. Follansbee PS and Sinclair GB (1984), Quasi-static normal indentation of an elastic-plastic half space by a rigid sphere, Int J Solids Struct 20, 81.
22. Francis HA (1976), Phenomenological analysis of plastic spherical indentation, ASME, J Eng Mat and Tech 98, 272.
23. Gladwell GML (1976), Some unbonded problems in plane elasticity theory, ASME J Appl Mech 43, 263-267.
24. Green AE (1949), On Boussinesq’s problem and penny-shaped cracks, Proc Cambridge Philos Soc 45, 251.
25. Gupta PK, Walowit JA, and Finkin EF (1973), Stress distributions in plane strain layered elastic solids subjected to arbitrary boundary loading, ASME J Lubrication Tech 95, 427-433.
26. Gupta PK and Walowit JA (1974), Contact stresses between an elastic cylinder and a layered elastic solid, ASME J Lubrication Tech 96, 250-257.
27. Hamilton GM (1983), Explicit equations for the stresses beneath a sliding spherical contact, Proc Inst Mech Engrs 197C, 53.
28. Hamilton GM and Goodman LE (1966), Stress field created by a circular sliding contact, ASME J Appl Mech 33, 371 -376.
29. Hannah M (1951), Contact stress and deformation in a thin elastic layer, Quart J Mech Appl Math 4, 94-105.
30. Hardy C, Baronet CN, and Tordion GV (1971), Elasto-plastic indentation of a half-space by a rigid sphere, Int J Num Meth Eng 3, 451 -462.
31. Hertz H (1882), Uber die Berührung fester Elastische Körper und Uber die Harte (On the contact of rigid elastic solids and on hardness), Verhandlungen des Vereins zur Beförderung des Gewerbefieisses, Leipzig, Nov 1882 (For English translation see Miscellaneous Papers by H Hertz, Eds Jones and Schott, MacMillan, London, 1896.)
32. Hill R (1950), The Mathematical Theory of Plasticity, Oxford Univ Press, London.
33. Hill R, Storakers B, and Zdunek AB (1989), Theoretical study of the brinell hardness test, Proc R Soc Lond A423, 301-330.
34. Huber MT (1904), Zur Theorie der Beruhrung fester Elastischer Körper, Ann der Phys, 14, 153-163.
35. Ihara T, Shaw MC, and Bhushan B (1986a), Finite element analysis of contact stress and strain in an elastic film on a rigid substrate - Part I: Zero friction, ASMEJ Trib 108, 527-533.
36. Ihara T, Shaw MC, and Bhushan B (1986b), Finite element analysis of contact stress and strain in an elastic film on a rigid substrate - Part II: With friction, ASME J Trib 108, 534-539.
37. Ishlinsky AJ (1944), J Appl Math Mech (USSR) 8, 233.
38. Jaffar MJ and Savage MD (1988), On the numerical solution of line contact problems involving bonded and unbonded strips, J Strain Anal 23, 6777.
39. Johnson KL (1985), Contact Mechanics, Cambridge Univ Press, Cambridge, UK.
40. Jonsson B and Hogmark S (1984), Hardness measurements of thin films, Thin Solid Films 181, 257- 269.
41. Kannel JW and Dow TA (1986), Analysis of traction forces in a precision traction drive, ASME J Trib 108, 403-410.
42. Kennedy FE and Ling FF (1974), Elasto-plastic indentation of a layered medium, ASME J Eng Mat Tech 96, 97-103.
43. Kikuchi N and Oden JT (1985), Contact Problems in Elasticity, SIAM, Philadelphia.
44. King RB and O’Sullivan TC (1987), Sliding contact stresses in a two-dimensional layered elastic half space, Int J Solids Struct 23, 581 -597.
45. Komvopoulos K (1988), Finite element analysis of a layered elastic solid in normal contact with a rigid surface, ASME J Trib 110, 477-485.
46. Komvopoulos K (1989), Elastic-plastic finite element analysis of indented layered media, ASME J Trib 111, 430-439.
47. Kral ER, Komvopoulos K, and Bogy DB (1993), Elastic-plastic finite element analysis of repeated indentation of a half-space by a rigid sphere, ASME J Appl Mech 60, 829-841.
48. Kral ER, Komvopoulos K, and Bogy DB (1995a), Finite element analysis of repeated indentation of an elastic-plastic layered medium by a rigid sphere, Part I: Surface results, ASME J Appl Mech 62, 20-28.
49. Kral ER, Komvopoulos K, and Bogy DB (1995b), Finite element analysis of repeated indentation of an elastic-plastic layered medium by a rigid sphere, Part II: Subsurface results, ASME J Appl Mech 62, 29-42.
50. Kulkami SM, Hahn GT, Rubin CA„ and Bhargava V (1991), Elastoplastic finite element analysis of three-dimensional pure rolling contact above the shakedown limit, ASME J Appl Mech 58, 347-353.
51. Laursen TA and Simo JC (1992), Study of the mechanics of microindentation using finite elements, J Mat Res 7, 618-626.
52. Lawn B (1993), Fracture of Brittle Solids, Cambridge Univ Press, Cambridge, U.K.
53. Lee CH and Kobayashi S (1970), Elastoplastic analysis of plane strain and axisymmetric flat punch indentation by the finite element method, Int J Mech Sci 12, 349-370.
54. Lode W (1926), Versuche ueber den Einfluss der Einfluss der mittleren Hauptspannung auf das Fliessen der Metalle Eisen Kupfer und Nickel, Z Physik 36, 913-939.
55. Martins JAC, Oden JT, and Simoes FMF (1990), Recent advances in engineering science, a study of static and kinetic friction, Int J Eng Sei 28, 29-92.
56. Matthews JR (1980), Indentation hardness and hot pressing, Acta Met 28, 311-318.
57. Meijers P (1968), Contact problem of a rigid cylinder on an elastic layer, Appl Sei Res 18, 353-383.
58. Montmitonnet P, Edlinger ML, and Felder E (1993), Finite element analysis of elastoplastic indentation: Part II - Application to hard coatings, ASME J Trib 115, 15-19.
59. Morton WB and Close U (1922), Notes on Hertz's theory of contact problems, Philos Mag 43 (254) 320-329.
60. Norbury AL and Samuel T (1928), Recovery and sinking-in or piling-up of material in the Brinell test, J Iron and Steel Inst 117, 673.
61. Oden JT and Martins JAC (1985), Models and computational methods for dynamic friction phenomena, Comput Methods in Appl Mech and Eng 52, 527-634.
62. O’Sullivan TC and King RB (1988), Sliding contact stress field due to a spherical indenter on a layered elastic half-space, ASME J Trib 110, 235-240.
63. Rabier P, Martins JAC, and Oden JT (1986), Existence and local uniqueness of solutions to contact problems in elasticity with nonlinear friction laws,” Int J Eng Sci 24, 1755-1768.
64. Sackfield A and Hills DA (1983), Note on the Hertz contact problem: correlation of standard formulae, J Strain Anal 18, 195.
65. Shaw MC and De Salvo GJ (1970), New approach to plasticity and its application to blunt two dimensional indenters, ASME J Eng Indust 37, 469-479.
66. Sinclair GB, Follansbee PS, and Johnson KL (1985), Quasi-static normal indentation of a elasto-plastic half-space by a rigid sphere - II Results, Int J Solids Struct 21, 865-888.
67. Tabor D (1951), Hardness of Metals, Clarendon Press, Oxford.
68. Tabor D (1970), Hardness of Solids, Proc Inst Phys, F Phys in Tech 1, 145-179.
69. Tabor D (1986), Indentation Hardness and its Measurement: Some Cautionary Comments, Microindentation Techniques in Materials Science and Engineering (PJ Blau and BR Lawn, eds), 129-159, ASTM, Philadelphia.
70. Thomas TR (ed) (1982), Rough Surfaces, Longman, London.
71. Tian H and Saka N (1991), Finite element analysis of an elastic-plastic two-layer half-space: Normal contact, Wear 148,47-68.
72. Walowit JA and Pinkus O (1982), Effect of friction between cylinders and rubber staves of finite thickness, ASME J Lubrication Tech 104, 255-261.
73. Whitehouse DJ (1994), Handbook of Surface Metrology, Inst of Phys Pub, Bristol, U.K.
74. Yu M, Moran B, and Keer LM (1993), Direct analysis of two-dimensional elastic-plastic rolling contact, ASME J Trib 115, 227-236.
75. Yu M, Moran B, and Keer LM (1993), Direct analysis of three-dimensional elastic-plastic rolling contact, ASME J Trib 117, 234-243.