Fundamental aspects of hot isostatic pressing: An overview

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 31, Issue 12, 2000, Pages 2981-3000

  Atkinson, H V ^a,b   Davies, S ^a,b  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

^b Bodycote HIP Ltd   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CASTINGS; CONSOLIDATION; DENSIFICATION; ENCAPSULATION; INTERFACES (MATERIALS); MATHEMATICAL MODELS; SHRINKAGE; SINTERING;

INTERFACIAL BONDING;

HOT ISOSTATIC PRESSING;

EID: 0034487812     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-000-0078-2     Document Type: Article

References (129)

1. G.W. Greenwood: Proc 17th Annual BICTA Conf., Stratford-UponAvon, Sept. 1983, British Investment Casters Trade Association, Alvechurch, 1983, pp. 11:1-11:8.
2. M.F. Ashby: Proc. Int. Conf. on Hot Isoslatic Pressing, Lulea, June 15-17,1987,7. Can-are, ed., Centek, Lulea, Sweden, 1987, pp. 29-40.
3. H.V. Atkinson and B.A. Rickinson: Hot Isostatic Processing, Adam Hilger, Bristol, 1991, p. 190.
4. R.M. German: Sintering Theory and Practice, Wiley, New York, NY, 1996,
5. H.A. Sailer, S.J. Paprocki, R.W. Dayton, and E.S. Hodge: U.S. Patent 687,842 and Canadian Patent 680,160, 1964.
6. E. Lardner: Metallurgist Mater. Technologist, 1982, vol. 14 (3), pp. 115-18.
7. T. Crousatier: Fonderie, 1975, vol. 347, pp. 265-80.
8. G.E. Wasielewski and N.R. Lindblad: Proc 2nd Int. Conf. Snperalloys Processing, TMS-AIME, Champion, PA, 1972, pp. D-l-D-24.
9. Battelle MCIC Report No. MCIC-77-34, Columbus Laboratories, Battelle, Columbus, OH, 1987.
10. M.B. Waldron and B.L. Daniell: Sintering, Heyden, London, 1978, p. 62.
11. S. Quaranta and L.B.P. Antona: Alluminio, 1981, pp. 96-99.
12. E.A. Olevsky: Mater. Sei. Eng. 1998, vol. R23(2), pp. 41-100.
13. J.K. Mackenzie and R. Shuttleworth: Proc. Pliys. Soc., 1949, vol. 62, pp. 833-52.
14. R.L. Coble and M.C. Flemings: Metall. Trans., 1971, vol. 2, pp. 409-15.
15. P. Murray, E.P. Rogers, and A.E. Williams: Trans. Br. Ceram. Soc., 1954, vol. 53, pp. 474-510.
16. G.W. Greenwood: J. Mater. Sei., 1969, vol. 4, pp. 320-22.
17. R.S. Nelson, D.J. Mazey, and R.S. Barnes: Phil. Mag., 1965, vol. 11, pp. 91-111.
18. G.W. Greenwood: Report of Manchester Symp. on Phase Transformations, Institute of Metals, London, 1968, pp. 103-10.
19. M.V. Speight and G.W. Greenwood: Phil. Mag., 1964, vol. 9, pp. 683-89.
20. R.L. Coble: J Appl. Phys., 1970, vol. 41, pp. 4798-4807.
21. F.W. Crossman and M.F. Ashby: Ada Metall, 1975, vol 23, pp. 425-40.
22. D.S. Wilkinson and M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 1277-85.
23. W. Schalt, E. Friedrich, and E.P. Wieters: Rev. Powder Met. Phys. Ceram., 1986, vol. 3, pp. 1-111.
24. B.H. Alexander and R.W. Balluffi: Acta Metall, 1957, vol. 5, pp. 666-77.
25. G.W. Greenwood, H. Jones, and J.H. Woodhead: Phil. Mag., 1975, vol 31, pp. 39-46.
26. M. Basaran,T.Z. Kattamis, R. Mehrabian, and M.C. Flemings: Metall. Trans., 1973, vol. 4, pp. 2429-34.
27. O.H. K\von and G.L. Messing: Isostatic Pressing Theory and Applications, ASM, Metals Park, OH, 1991, pp. 165-70.
28. K.G. Ewsuk and G.L. Messing: J. Mater. Sei., 1984, vol. 19, pp. 1530-34.
29. J.E. Smugeresky: personal communication with R.M. German, Sandia National Laboratory, CA.
30. S.H. Lee, J.K. Yang, and D.Y. Kim: J. Am. Ceram. Soc., 1993, vol. 76 (4), pp. 880-84.
31. W.B. Li and H.A. Haggblad: Powder Metall., 1997, vol. 40, pp. 279-81.
32. D.S. Wilkinson: Ph.D. Thesis, University of Cambridge, Cambridge, United Kingdom, 1977.
33. F.B. Swinkels, D.S. Wilkinson, E. Arzt, and M.F. Ashby: Acta Metall., 1983, vol. 31, pp. 1829-40.
34. E. Arzt: Acta Metall., 1982, vol. 30, pp. 1883-90.
35. E. Arzt, M.F. Ashby, and K.E. Easterling: Metall. Trans. A, 1983, vol 14A, pp. 211-21.
36. A.S. Helle, K.E. Easterling, and M.F. Ashby: Acta Metall., 1985, vol. 33, pp. 2163-74.
37. P.S. Oilman and G.H. Gessinger: Powder. Met. Int., 1980, vol. 12, pp. 38-40.
38. G.G. Davies and D.R.H. Jones: Acta Mater., 1997, vol. 45, pp. 775-89.
39. W.A. Kaysser, M. Asian, E. Arzt, M. Mitkov, and G. Petzow: Powder Metall., 1988, vol. 31, pp. 63-69.
40. S.VNair and J.K. Tien: Metall. Trans.A., 1987, vol. 18 A, pp. 97-107.
41. E-K.H.Li and P.D. Funkenbusch: Acta Metall., 1989, vol. 37, pp. 1645-55.
42. E.K.H. Li and P.D. Funkenbusch: Metall. Trans. A, 1993, vol. 24A, pp 1345-54.
43. B.K. Lograsso and D.A. Koss: Metall. Trans. A, 1988, vol. 19A, pp. 1767-73.
44. B.K. Lograsso and T.A. Lograsso: Mater. Manufacturing Processes, 1994, vol. 9, pp. 681-94.
45. A.J. Fletcher and S. King: Mater. Sei. Techno!., 1996, vol. 12, pp. 477-82.
46. M.F. Ashby: HIP487, version HIP6.1, Cambridge University, Cambridge, United Kingdom, 1990, and accompanying documentation on Sintering and Isostatic Pressing Diagrams.
47. K.S. Oh, D.Y. Kirn, and S.J. Cho: J. Am. Ceram. Soc., 1995, vol. 78, pp. 2537-40.
48. G.C. Davies and D.R.H. Jones: Scripla Mater., 1997, vol. 37, pp. 1745-51.
49. W.B. Li, M.F. Ashby, and K.E. Easterling: Acta Metall., 1987, vol. 35, pp. 2831-42.
50. M.F. Ashby, S. Bahk, J. Berk, and D. Turabull: Progr. Mater. Sci., 1980, vol. 25, pp. 1-34.
51. F.F. Lange, L. Alteras, F. Zok, and J.R. Porter: Acta Metall. Mater., 1991, vol. 39, pp. 209-19.
52. E. Pagounis, M. Talvitie, and V.K. Lindroos: Mater. Res. Bull., 1996, vol. 31, pp. 1277-85.
53. H.N.G. Wadley and D.M. Elzey: Proc. Conf. Composites Design, Manufacture and Application, ICCM VIII, Section 12-21, S.W. Tsai and O.S. Springer, eds., Honolulu, July 15-19, 1991, Society for Advancement of Materials and Process Engineering (SAMPE), 1991, pp. B1-BI1.
54. Y.A. Bahei-el-din and G.J. Dvorak: Acta Metall. Mater., 1995, vol. 43, pp. 2531-39.
55. R. Vancheeswaran, D.M. Elzey, J.M. Kunze, and H.N.G. Wadley: Mater. Sei. Eng. A, 1998, vol. 244, pp. 49-57.
56. M. Khazami-Zadeh and F. Petzoldt: Advances in Powder Metallurgy and Paniculate Materials, Metal Powder Industries Federation (MPIF), Princeton, NJ, 1995, vol. 2, pp. 5-125-5-128.
57. H.A. Kuhn and C.L. Downey: Int. J. Powder Metall., 1971, vol 7, pp. 15-25.
58. R.J. Green: Int. J. Mech. Sei., 1972, vol. 14, pp. 215-24.
59. M. Oyane, S. Shima, and Y. Kono: Bull. Jpn. Inst. Mech. Eng., 1973, vol 16, pp 1254-62.
60. S. Shima and M. Oyane: Int. J. Mech. Sei., 1976, vol. 18, pp. 28591.
61. M. Abouaf and J.L. Chenot: J. Mecanique Theorique Appl., 1986, vol. 5, pp. 121-40.
62. M. Abouaf, J.L. Chenot, G. Raisson, and P. Bauduin: Int. J. Num. Methods Eng., 1988, vol. 25, pp.191-212.
63. S. Yossifon, Y. Gefen, D. Kalin, and O. Yeheskel: Hot Isostatic Pressing: Theory and Applications: Proc. 2nd Int. Conf. on HIP, R.J. Schaefer and M. Linzer, eds., ASM INTERNATIONAL, Materials Park OH, 1991, pp. 63-71.
64. S. Shima: Hot Isostatic Pressing: Theory and Applications. Proc. 3rd Conf. on HIP, M. Koizumi, ed., Eisevier Science, Barking, 1992, pp. 11-16.
65. K.I. Mori, K. Oskada, and T. Hirano: Hot Isostatic Pressing: Theory and Applications: Proc. 3rd Int. Conf. on HIP, M. Koizumi, ed., Eisevier Science, Barking, 1992, pp. 29-34.
66. A. Nohara, T. Nakagawa, T. Soh, and T. Shinke: Int. J. Num. Methods Eng., 1988, vol. 25, pp. 213-25.
67. N. Ramakrishnan and VS. Arunachalam: Progr. Mater. Sei., 1997, vol. 42, pp. 253-61.
68. J.R.L. Trasorras, M.E. Canga, and W.B. Eisen: Advances in Powder Metallurgy and Paniculate Materials, Proc. Conf., C Lall and A.J. Neupaver, eds., Metal Powder Industries Federation (MPIF), Princeton, NJ, 1994, vol.7, pp. 51-69.
69. J.F. Zarzour, J.R.L. Trasorras, J. Xu, and J.J. Conway: Advances in Powder Metallurgy and Paniculate Materials, M. Phillips and J. Porter, eds.. Metal Powder Industries Federation (MPIF), Princeton NJ, 1995, vol. 2, Part 5, pp. 89-112.
70. J.R.L. Trasorras, R. Parameswaran, J. Xu, R. Anbajagane, and V.B.S. Rachakonda: Advances in Powder Metallurgy and Paniculate Materials, M. Phillips and J. Porter, eds., Powder Industries Federation (MPIF), Princeton, NJ, 1995, vol. 2, Part 5, pp. 139-52
71. D. Bouvard, O. Bouaziz, C. Dellis, and A.G.K. Jinka: Proc. Int. Conf. on Hot Isostatic Pressing, Andover, MA, May 20-22, 1996, ASM, Materials Park, OH, 1996, pp. 53-57.
72. O. Bouaziz, R. Baccino, C. Dellis, F. Moret, and P. Stutz: Proc. Int. Conf. on Hot Isostatic Pressing, May 20-22, 1996, Andover, MA, ASM, Material Park, OH, 1996, pp. 145-50.
73. Y.S. Kwon and K.T. Kirn: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 779-82.
74. A. Kuhne, R. Oberacker, and T. Jungling: in Hot Isostalic Pressing '93, L. Delaey and H. Tas, eds., Eisevier Sciences B.V., Rotterdam, 1994, pp. 569-80.
75. H.P. Piehler and D.M. Watkins: Proc. 2nd Int. Conf. on Hot Isostatic Pressing-Theories and Applications, Gaithersburg, MD, June 1989, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 321-27.
76. A.M. Laptev, V.N. Samarov, and S.V. Podlesny: Powder Metall. Int., 1990, vol. 22, pp. 23-25.
77. D. Bouvard and M. Lafer: Advances in Powder Metallurgy, MPIF, Princeton, NJ, 1989, pp. 491-503.
78. A. Svoboda, L. Bjork, and H.A. Haggblad: in Computational Methods and Experimental Measurements VII, GM Carlomagno and CA Brebbia, eds.. Computational Mechanics Publications, Southampton, 1994, pp. 29-39.
79. A.G.K. Jinka and R.W. Lewis: Computer Methods Appl. Mech. Eng., 1994, vol. 114, pp. 249-72.
80. M. Khazami-Zadeh, D.O. Seliverstov, F. Petzoldt, and H.D. Kunze: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 761-64
81. V. Skorokhod, E. Olevsky, and M. Shtem: Sou Powder Metall., 1993, vol. 3, pp. 208-13.
82. A. Svoboda, H.A. Haggblad, and M. Nasstrom: Eng. Computations, 1996, vol. 13, pp. 13-39.
83. T.F. Zahrah, F. Charron, and L. Christodoulou: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 783-87.
84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21-23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire OPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D'Heres Cedex, France.
85. A. Svoboda, H.A. Hagablad, and L. Karlsson: Computer Methods Appl. Mech. Eng., 1997, vol. 148, pp. 299-314.
86. A. Svoboda, L.E. Lindgren, and A.S. Oddy: Int. J. Num. Methods Eng., 1998, vol. 43, pp. 587-606.
87. J.K. McCoy, L.E. Muttart, and R.R. Wills: Am. Ceram. Soc. Bull., 1985, vol. 64, pp. 1240-44.
88. D. Bouvard and M. Lafer: Powder Metall. Int., 1989, vol. 21, pp. 11-15.
89. O. Bouaziz, C. Dellis, and P. Stutz: pp. 67,-75 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21-23,1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/ CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint MartinD'Heres Cedex, France.
90. K.T. Kim and Y.C. Jeon: pp. 77-86 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21-23,1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D'Heres Cedex, France.
91. P. Stutz, R. Aryanpour, O. Bouaziz, and C. Dellis: pp. 113-22 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21 -23,1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D'Heres Cedex, France.
92. L. Sanchez, E. Ouedraogo, P. Stutz, and C. Dellis: pp. 295-304 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21 -23,1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D'Heres Cedex, France.
93. C. Dellis, O. Bouaziz, R. Baccino, and F. Moret: pp. 305-14 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21 -23,1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D'Heres Cedex, France.
94. W.B. Eisen, O. Bouaziz, and C. Dellis: pp. 325-34 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21-23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/ CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46,38402, Saint MartinD'Heres Cedex, France.
95. E. Olevsky, S. Van Dyck, L. Froyen, and L. Delaey: Proc. Int. Conf. on Hot Isostatic Pressing, May 20-22, 1996, Andover, MA, F.H. Froes, J. Hebeisen, and R. Widmer, eds., ASM, Materials Park, OH, 1996, pp. 63-67.
96. J.M. Duva and P.D. Crow: Ada Metall, 1992, vol. 40, pp. 31-35.
97. 97.'W.B. Li and K.E. Easterling: Powder Metall, 1992, vol. 35, pp. 4752.
98. E. Olevsky, M. Shtern, and V. Skorohod: Proc. Int. Conf. on Hot Isostatic Pressing, Antwerp, 1993, L. Delaey and H. Tas, eds., Elsevier Science B.V., Amsterdam, 1994, pp. 45-52.
99. A.G.K. Jinka: J. Mater. Processing Technol., 1996, vol. 57, pp. 382-92.
100. A.L. Maximenko, E.A. Olevsky, Y.A. Panfilov, M.B. Shtem, and E.A. Yurchenko: Proc. Int. Conf. on Hot Isostatic Pressing, Antwerp, 1993. L. Delaey and H. Tas, eds., Elsevier Science B.V., Amsterdam, 1994. pp. 61-67.
101. H.N. Wadley, R.J. Schaefer, A.H. Khan, M.F. Ashby, R.B. Clough, Y. Geffen, and J.J. Wlassich: Acta Metall., 1991, vol. 39, pp. 97986.
102. R.M. McMeeking: Int. J. Mech Sei., 1992, vol.1 34, pp. 53-62.
103. J. Besson and M. Abouaf: Int. J. Solids Struct., 1991, vol. 28, pp. 691-702.
104. J. Xu and R.M. McMeeking: Int. J. Mech. Sei., 1992, vol. 34, pp. 167-74.
105. J.K. McCoy and R.R. Wills: Acta Metall., 1987, vol. 35, pp. 577-85.
106. J. Besson and M. Abouaf: J. Am. Ceram. Soc., I992, vol. 75, pp. 2165-72.
107. R.M. Govindarajan and N. Aravas: Proc. Int. Conf on Hot Isostatic Pressing, Antwerp, 1993, L. Delaey and H. Tas, eds., Elsevier Science B.V., Amsterdam, 1994, pp. 29-36.
108. T.F. Zarah, F. Charron, and L. Christodoulou: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 783-87.
109. D. Abondance, R. Baccino, F. Bernier, F. Moret, J.M. de. Monicault, D. Guichard, P. Stutz, and D. Bouvard: Proc. Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 797-800.
110. A.G.K. Jinka, M. Bellet, and C. Fourment: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 793-96.
111. E. Olevsky, A. Maximenko, S. Van Dyck, L. Froyen, L. Delaey, and L. Buekenhout: Int. J. Solids Struct., 1998, vol. 35, pp. 2283-303.
112. K.T. Kirn, Y.S. Kwon, and H.G. Kim: Int. J. Mech. Sei., 1997, vol. 39, pp. 1011-22.
113. Y.S. Kwon and K.T. Kim: J. Eng. Mater. TechnoL, 1996, vol. 118, pp. 449-55.
114. Y.S. Kwon and K.T. Kim: J. Eng. Mater. TechnoL, 1996, vol. 118, pp. 471-77.
115. L.T. Kuhn and R.M. McMeeking: Int. J. Mech. Sei., 1992, vol. 34, pp 563-73.
116. P. Sofronis and R.M. McMeeking: J. Appl. Mech., 1992, vol. 59, pp. 588-95.
117. M.C. Song, H.G. Kirn, and K.T. Kirn: Int. J. Mech. Sei, 1996, vol. 38 (11), pp. 1197-1208.
118. R.E. Dutton, S.L. Semiatin, and R.L. Goetz: Mater. Sei. Eng. A, 1996, vol. 221 (1-2), pp. 85-93.
119. S. Schuler, B. Derby, M. Wood, and C.M. Ward-Close: Key Eng. Mater., 1997, vol. 127, pp. 351-58.
120. E. Olevsky, H.J. Dudek, and W.A. Kaysser: Acta Mater., 1996, vol. 44, pp. 707-13.
121. E. Olevsky, H.J. Dudek, and W.A. Kayserr: Acta Mater, 1996, vol. 44, pp. 715-24.
122. M.C. Zhang, M.C. Luo, and F.C. Zeng: /. Mater. Processing Techno!., 1997, vol. 72, pp. 262-66.
123. H.P. Buchkremer, R. Hecker, D. Stover, and H. Raes: Proc 2nd Int. Conf. on Hot hostatic Pressing: Theory and Applications, Gaithersburg, MD, June 7-9,1989, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 349-54.
124. H.N.G Wadley, A.H Kahn, Y. Geffen, and M. Mester: Proceedings of Review of Progress in Quantitative Nondestructive Evaluation. D.O. Thompson and D.E. Chiment, eds., Plenum, New York, NY, 1988, vol. 7B, pp. 1589-98.
125. A.H. Kahn, M.A. Mester, and H.N.G. Wadley: Proc 2nd Int. Conf. on Hot hostatic Pressing; Theory and Applications, Gaithersburg, MD, June 7-9,1989, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 341-48.
126. R.J. Schaefer and G.M. Janowski: Acta Metall. Mater., 1992, vol. 40, pp. 1645-51.
127. D.A. Stubbs and R.E. Dutton: JOM, 1996, vol. 48, pp. 29-31.
128. H.R. Piehler and O.P. DeLo: Progr. Mater. Sei., 1997, vol. 42, pp. 263-76.
129. R.M. German and A. Boss: Mater. Sei. Eng., 1989, vol. A107, pp. 107-16.