A novel of osteosynthesis plate design for routine corrective facial surgery

Journal of Craniofacial Surgery

Volumn 13, Issue 4, 2002, Pages 585-594

  Mommaerts, Maurice Y ^a  

^a General Hospital St Jan   (Belgium)

Author keywords

Bone screws; Fracture fixation; Internal; Osteotomy

Indexed keywords

ADULT; BONE GRAFT; BONE PLATE; BONE SCREW; CLINICAL ARTICLE; DATA ANALYSIS; DEVICE REMOVAL; ESTHETICS; FACE DEFORMITY; FACE FRACTURE; FACE SURGERY; FEMALE; FRACTURE IMMOBILIZATION; FRACTURE TREATMENT; HUMAN; MALE; NEUROMUSCULAR FUNCTION; OSTEOSYNTHESIS MATERIAL; OSTEOTOMY; PILOT STUDY; POSTOPERATIVE CARE; PRIORITY JOURNAL; REVIEW; SURGICAL TECHNIQUE; TOOTH OCCLUSION; ARTICLE; BONE TRANSPLANTATION; CHIN; COMPARATIVE STUDY; ELECTRONICS; EQUIPMENT DESIGN; FACIAL BONE; INSTRUMENTATION; MANDIBLE; MAXILLA; MAXILLA OSTEOTOMY; PEROPERATIVE CARE; PLASTIC SURGERY; PROSPECTIVE STUDY; RETROSPECTIVE STUDY; SURFACE PROPERTY; ZYGOMA;

TITANIUM;

ADULT; BONE PLATES; BONE SCREWS; BONE TRANSPLANTATION; CHIN; DENTAL OCCLUSION; EQUIPMENT DESIGN; ESTHETICS; FACIAL BONES; FEMALE; HUMANS; INTRAOPERATIVE CARE; MALE; MANDIBLE; MAXILLA; MINIATURIZATION; OSTEOTOMY; OSTEOTOMY, LE FORT; PILOT PROJECTS; PROSPECTIVE STUDIES; RECONSTRUCTIVE SURGICAL PROCEDURES; RETROSPECTIVE STUDIES; SURFACE PROPERTIES; TITANIUM; ZYGOMA;

EID: 0038479943     PISSN: 10492275     EISSN: None     Source Type: Journal    
DOI: 10.1097/00001665-200207000-00023     Document Type: Review

References (63)

1. Thomas DW, Michael Hill C. Etiology and changing patterns of maxillofacial trauma. In: Ward Booth P, Schendel SA, Hausamen JA (eds). Maxillofacial Surgery Volume 1, Section 1. Trauma. Edinburgh: Churchill Livingstone, 1999:3-10
2. Shetty V, Freymiller E, McBrearty D, Caputo AA. Experimental analysis of functional stability of sagittal split ramus osteotomies secured by miniplates and position screws. J Oral Maxillofac Surg 1996;54:1317-1324
3. Luhr HG. Entwicklung der modernen Osteosynthese. Mund Kiefer Gesichtschir 2000;4 Suppl 1: S84-90
4. Bähr W, Stricker A, Gutwald R, Wellens E. Biodegradable osteosynthesis material for stabilization of midface fractures: experimental investigation in sheep. J Craniomaxillofac Surg 1999;27:51-57
5. Mommaerts MY, Abeloos JV, De Clercq CA, Neyt LF. The 'sandwich' zygomatic osteotomy: technique, indications and clinical results. J Craniomaxillofac Surg 1995;23:12-19
6. Van Butsele BL, Mommaerts MY, Abeloos JS, De Clercq CA, Neyt LF. Creating lip seal by maxillo-facial osteotomies. A retrospective cephalometric study. J Craniomaxillofac Surg 1995;23:165-174
7. Mommaerts MY, Nadjmi N, Abeloos JV, Neyt LF. Six year's experience with the zygomatic 'sandwich' osteotomy for correction of malar deficiency. J Oral Maxillofac Surg 1999;57:8-13
8. Anucul B, Waite PD, Lemons JE. In vitro strength analysis of sagittal split osteotomy fixation: noncompression monocortical plates versus bicortical position screws. J Oral Maxillofac Surg 1992;50:1295-1299
9. Mommaerts MY, Abeloos JS, De Clercq CA, Neyt LF. Evaluation of the SLOT-osteosynthesis technique in mandibular advancement. With focus on occlusion and lower lip sensibility. J Craniomaxillofac Surg 1994;22:281-285
10. Li D, Liu B, Han Y, Xu K. Effects of a modified sandblasting surface treatment on topographic and chemical properties of titanium surface. Implant Dent 2001;10:59-64
11. Wang JC, Yu WD, Sandhu HS, Betts F, Bhuta S, Delamarter RB. Metal debris from titanium spinal implants. Spine 1999; 24:899-903)
12. Matthew IR, Frame JW, Browne RM, Miller BG. In vivo surface analysis of titanium and stainless steel miniplates and screws. Int J Oral Maxillofac Surg 1996;25:463-468
13. Peltoniemi HH, Tulamo RM, Toivonen T, Hallikainen D, Tormala P, Waris T. Biodegradable semirigid plate and miniscrew fixation compared with rigid titanium fixation in experimental calvarial osteotomy. J Neurosurg 1999;90:910-917
14. Matthew IR, Frame JW. Release of metal in vivo from stressed and nonstressed maxillofacial fracture plates and screws. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2000:90:33-38
15. Rays MS, Matthew IR, Frame JW. Metalic fragments on the surface of miniplates and screws before insertion. Br J Oral Maxillofac Surg 1999;37:14-18
16. Acero J, Calderon J, Salmeron JI, Verdaguer JJ, Concejo C, Somacarrera ML. The behavior of titanium as a biomaterial: microscopy study of plates and surrounding tissues in facial osteosynthesis. J Craniomaxillofac Surg 1999;27:117-123
17. Schmidt BL, Perrott DH, Mahan D, Kearns G. The removal of plates and screws after Le Fort I osteotomy. J Oral Maxillofac Surg 1998;56:184-188
18. Brown JS, Trotter M, Cliffe J, Ward-Booth RP, Williams ED. The fate of miniplates in facial trauma and orthognathic surgery: a retrospective study. Br J Oral Maxillofac Surg1998;27: 306-315
19. Patel MF, Langdon JD. Titanium mesh (TiMesh) osteosynthesis: a fast and adaptable method of semi-rigid fixation. Br J Oral Maxillofac Surg 1991;29:316-324
20. Goodship AE, Kenwright J. The influence of induced micro-movement on the healing of experimental tibial fractures. J Bone Joint Surg 1985;67B: 650-655
21. Lucas GL, Cokke FW, Friis EA. A primer of biomechanics. New York: Springer, 1999:128-131
22. Xu X, Cordey J, Rahn BA, Ziegler WJ. Stripping of thread in bone by commercial cortical self-tapping and pre-tapped screws. In: Bergmann G et al (eds): Proceedings of the Congress of the European Society of Biomechanics. Developments in Biomechanics, vol 3, 1990:52-59
23. DeCoster TA, Heetderks DB, Downey DJ, Ferries JS, Jones W. Optimizing bone screw pullout force. J Orthop Trauma 1990;4: 169-174
24. Shetty V, Freymiller E, McBrearty D, Caputo AA. Functional stability of sagittal split ramus osteotomies: effects of positional screws size and placement configuration. J Oral Maxillofac Surg 1996;54:601-610
25. Skinner R, Maybee J, Transfeldt E, Venter R, Chalmers W. Experimental pullout testing and comparison of variables in transpedicular screw fixation. A biomechanical study. Spine 1990;15:195-201
26. Saka B. Mechanical and biomechanical measurements of five currently available osteosynthesis systems of self-tapping screws. Br J Oral Maxillofac Surg 2000;38:70-75
27. Chapman JR, Harrington RM, Lee KM, Anderson PA, Tencer AF, Kowalski D. Factors affecting the pullout strength of cancellous bone screws. J Biomech Eng 1996;118:391-398
28. Weiler A, Windhagen HJ, Raschke MJ, Laumeyer A, Hoffmann RF. Biodegradable interference screw fixation exhibits pull-out force and stiffness similar to titanium screws. Am J Sports Med 1998;26:119-126
29. Daftari TK, Horton WC, Hutton WC. Correlations between screw hole preparation, torque of insertion, and pullout strength for spinal screws. J Spinal Disord 1994;7:139-145
30. Ryken TC, Clausen JD, Traynelis VC, Goel VK. Biomechanical analysis of bone mineral density, insertion technique, screw torque, and holding strength of anterior cervical plate screws. J Neurosurg 1995;83:325-329
31. Papagelopoulos PJ, Currier BL, Stone J, Grabowski JJ, Larson DR, Fischer DR, An KN. Biomechanical evaluation of occipital fixation. J Spinal Discord. 2000;13:336-344
32. Koranyi E, Bowman CE, Knecht CD, Janssen M. Holding power of orthopedic screws in bone. Clin Orthop 1979;72:283-286
33. Uhthoff HK. Mechanical factors influencing the holding power of screws in compact bone. J Bone Joint Surg 1973;55B: 633-639
34. Boyle JM 3d, Frost DE, Foley WL, Grady JJ. Torque and pull-out analysis of six currently available self-tapping and 'emergency' screws. J Oral Maxillofac Surg 1993;51:45-50
35. Bechtol CO. Internal fixation with plates and screws. In: Bechtol CO (ed) Metals and Engineering in Bone and Joint Surgery. Baltimore: Williams & Wilkins, 1959:162-164
36. Bähr W. Morphologie des Knochengewindes nach Implantation von 2mm-AO-Minischrauben im Mittelgesicht. Unfallchirurg 1989;92:54-58
37. Uhthoff HK. Mechanical factors influencing the holding power of screws in compact bone. J Bone Joint Surg 1973;55B: 663-669
38. Foley WL, Frost DE, Tucker MR. The effect of repetitive screw hole use on the retentive strength of pretapped and self-tapped screws. J Oral Maxillofac Surg 1990;48:264-267
39. Klokkevold PR, Nishimura RD, Adachi M, Caputo A. Osseointegration enhanced by chemical etching of the titanium surface. A torque removal study in the rabbit. Clin Oral Implants Res 1997;8: 442-447
40. Moroni A, Faldini C, Chilo V, Rocca M, Stea S, Giannini S. The effect of surface material and roughness on bone screw stability. J Orthop Trauma 1999;13:477-482
41. Hughes AN, Jordan BA. The mechanical porperties of surgical bone screws and some aspects of insertion practice. Injury 1972;4:25-38
42. Heidemann W, Gerlach KL, Gröbel K-H, Köllner H-G. Influence of different pilot hole sizes on torque measurements and pullout analysis of osteosynthesis screws. J Craniomaxillofac Surg 1998;26:50-55
43. Righi E, Carta M, Bruzzone AA, Lonardo PM, Marinaro E Pastorino A. Experimental analysis of internal rigid fixation osteosynthesis performed with titanium bone screw and plate systems. J Craniomaxillofac Surg 1996;24:53-57
44. Sturmer KM. Die elastische Plattenosteosynthese, ihre Biomechanik, Indikation und Technik im Vergleich zur rigiden Ostsosynthese. Unfallchirurg 1996;99:816-829
45. Cordey J, Borgeaud M, Perren SM. Force transfer between the plate and the bone: relative importance of the bending stiffness of the screws friction between plate and bone. Injury 2000;31: Suppl 3: C21-C28
46. Field JR, Hearn TC, Caldwell CB. The influence of screw torque, object radius of curvature, mode of bone plate application and bone plate design on bone plate interface mechanics. Injury 1998;29:233-241
47. Cordey J, Mikuschka-Galgoczy E, Blümlein H, Schneider U, Perren SM. Importance de la friction plaque-os pour l'ancrage des plaques d'ostéosynthèse. Détermitination du coefficient de friction métal-os chez l'animal 'in vivo'. Helv Chir Acta 1979; 46:183-187
48. Sasaki K, Hannam AG, Wood WW. Relationships between size, position, and angulation of human jaw muscles and unilateral first molar bite force. J Dent Res 1989;68:499-503
49. Helkimo E, Carlsson GE, Helkimo M. Bite force and state of dentition. Acta Odontol Scand 1977;35:297-303
50. Throckmorton GS, Ellis E 3rd, Buschang PH. Morphologic and biomechanical correlates with maximum bite forces in orthognathic surgery patients. J Oral Maxillofac Surg 2000;58:515-524
51. Tortopidis D, Lyons MF, Baxendale RH, Gilmour WH. The variability of bite force measurement between sessions, in different positions within the dental arch. J Oral Rehabil 1998;25: 681-686
52. Shinogaya T, Sodeyama A, Matsumoto M. Bite force and occlusal load distribution in normal complete dentition of young adults. Eur J Prosthodont Restor Dent 1999;7:65-70
53. Harada K, Watanabe M, Ohkura K, Enomoto S. Measure of bite force and occlusal contact area before and after bilateral sagittal split ramus osteotomy of the mandible using a new pressure-sensitive device: a preliminary report. J Oral Maxillofac Surg 2000;58:370-373
54. Maurer P, Holweg S, Schubert J. Finite-element-analysis of different screw-diameters in the sagittal split osteotomy of the mandible. J Craniomaxillofac Surg 1999;27:365-372
55. Drommer RB. Torque measurements of the mechanical load capacity of thin bony structures of the visceral cranium. J Maxillofac Surg 1986;14:128-131
56. Reyneke JP, Johnston T, van der Linden WJ. Screw osteosyntheisis compared with wire osteosynthesis in advancement genioplasty: a retrospective study of skeletal stability. Br J Oral Maxillofac Surg 1997;35:352-356
57. Edwards RC, Kiely KD, Eppley BL. Resorbable fixation techniques for genioplasty. J Oral Maxillofac Surg 2000;58:269-272
58. Schierle HP, Schmelzeisen R, Rahn B. Experimental studies of the biomechanical stability of different miniplate configurations for the mandibular angle. Fortschr Kiefer Gesichtschir 1996;41:166-170
59. Tams J, Otten B, van Loon JP, Bos RR. A computer study of fracture mobility and strain on biodegradable plates used for fixation of mandibular fractures. J Oral Maxillofac Surg 1999; 57:973-981
60. Kroon FH, Mathisson M, Cordey JR, Rahn BA. The use of miniplates in mandibular fractures. An in vitro study. J Craniomaxillofac Surg 1991;19:199-204
61. Heinl Th, Neumayer B. Vorgeformte Titanosteosyntheseplatte für Kieferwinkelfrakturen. Schweiz Monatschr Zahnmed 1987;97:985
62. Haug RH, Barber JE, Punjabi AP. An in vitro comparison of the effect of number and pattern of positional screws on load resistance. J Oral Maxillofac Surg 1999;57:300-308
63. Shepperd JP, Dohvoma CN, Harradine NWT. Screw fixation after mandibular sagittal split osteotomy: an intra-oral approach. Br J Oral Maxillofac Surg 1991;29:325-329