Development of dynamic recovery theory for aluminum

Advances in the Metallurgy of Aluminum Alloys

Volumn , Issue , 2001, Pages 351-360

  McQueen, H J ^a  

^a Gina Cody School of Engineering and Computer Science   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

CREEP; CRYSTAL MICROSTRUCTURE; DISLOCATIONS (CRYSTALS); DUCTILITY; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; HOT WORKING; METAL RECOVERY; OPTICAL MICROSCOPY; RECRYSTALLIZATION (METALLURGY); STRESSES; TRANSMISSION ELECTRON MICROSCOPY;

DYNAMIC RECOVERY THEORY; DYNAMIC RECRYSTALLIZATION; POLARIZED OPTICAL MICROSCOPY;

ALUMINUM ALLOYS;

EID: 0038478114     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (176)

1. J. T. Staley, J. Liu and W.H. Hunt, Advanced Mat. Proc., 152 [4] (1997) 17-20
2. P.R. Bridenbaugh and J.T. Staley, JOM (TMS-AIME) 46 [8] (1994) 39-43
3. H.J. McQueen, Hot Deformation of Aluminum Alloys, T.G. Langdon and H.D. Merchant, eds. TMS-AIME, Warrendale, PA (1991) pp. 31-54.
4. H.J. McQueen, Advanced Materials for 21st Century, J.R. Weertman Symp., Y. P. Chung ed., TMS-AIME, Warrendale, PA (1999), 169-184.
5. H.J. McQueen, Jonas Symposium on Thermomechanical Processing, Texture and Formability of Steel, E. Essadigi, S. Yue, eds., Met. Soc. CIM, Montreal (2000), pp. 323-333.
6. H.J. McQueen and D.L. Bourell, J. Met. 39[7] (1987) 28-35.
7. H.J. McQueen, S. Yue, N.D. Ryan and E. Fry, J. Mat. Proc. Tech. 53, (1995), pp. 293-310.
8. H.J. McQueen, Metal Forum (Aust). 4 (1981), 81-91
9. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul-Jensen, M.E. Kassner (editor), W.E. King, T. R. McNelley, H.J. McQueen and A.D. Rollett. Mat. Sci. Eng., A238 (1998) 219-274.
10. E.C. W. Perryman, Trans AIME. 203 (1955), 369-378.
11. H.J. McQueen, W. Blum, Mat. Sci. Eng., A290, (2000), 95-107.
12. H.J. McQueen (Creep Symposium ASME, San Diego, 2001) Metal. Mat. Trans (2001) (submitted)
13. H.J. McQueen, J. Mat. Proc. Tech., 37, (1993), 3-36.
14. H.J. McQueen and O.C. Celliers, Can. Metal. Quart. 36, (1997) 73-86.
15. H.J. McQueen, JOM. (TMS) 50 [6], (1998), 28-33.
16. H.J. McQueen and M. E. Kassner, Lightweight Alloys for Aerospace Applications, K. Jata ed. TMS-AIME Warrendale, PA, (2001) (in press)
17. H.J. McQueen, and J. J. Jonas, Aluminum Alloys '90, (2nd Int. Conf., Beijing), C.Q. Chen, ed., 1990, pp. 727-742.
18. R.F. Mehl ASM Handbook 1948 Edition American Society for Metals, Metals Park OH (1948), pp 259-263
19. J.J. Kanter, ibid American Society for Metals, Metals Park OH (1948) 18, pp. 115-118
20. J.H. Alden, ibid American Society for Metals, Metal Park OH (1948) 18 pp. 769-770
21. C.H. Mathewson, ibid American Society for Metals, Metals Park OH (1948) 18, pp 739-740
22. G. Sachs, K. R. Van Horne, Practical Metallurgy, Am. Society for Metals, Metals Park OH, (1943)
23. E.H. Dix, Physical Metallurgy of Al Alloys, American Society for Metals, Metals Park OH, (1999), pp. 200-240
24. E. Nes Acta Metall. Mat. 43 (1993) 2089
25. J.T. Wulff, H.F. Taylor and A.J. Shaler Metallurgy for Engineers. J. Wiley: New York, 1952
26. C.S. Barrett Structure of Metals 2nd Edition, McGraw-Hill, New York, (1954)
27. E. Schmid and W. Boas Plasticity of Crystals Chapman and Hull, London (1968)
28. W.R. Hibbard and C.G. Dunn, Creep and Recovery, Am. Soc. Metals, Metals Park OH, (1957) pp. 52-83.
29. J.E. Dorn, ibid Am. Soc. Metals, Metals Park OH, (1957) 28 pp. 255-283.
30. E.C.W. Perryman, ibid Am. Soc. Metals, Metals Park OH, (1957) 28 pp. 111-145.
31. H. Conrad, Mechanical Behavior of Materials at High Temp. J.E. Dorn, ed., McGraw-Hill, New York (1961) pp. 149-217.
32. A. S. Keh, Direct Observations of Importations in Crystals, J.B. Newkirk and J.H. Wernick Interscience Pub., New York (1962) pp 213-234
33. S. Weissman, T. Imura and N. Hosokawa, Recovery and recrystallization of Metals, New York, 1963 (Gordon and Breach), p. 241
34. Hsun Hu, Recovery and Recrystallization of Metals, New York, 1963 (Gordon and Breach) p. 311
35. W.C. Leslie, J.T. Michalak and F.W. Aul, Iron and Its Dilute Solid Solution, New York, 1963 (Inter-Science), p. 119
36. A.H. Cottrell, Dislocations and Plastic Flow in Crystals, Oxford Univ. Press (1953)
37. D. McLean, Mechanical Properties of Metals John Wiley and Sons, New York, (1952)
38. W.A. Wood, G.R. Wilms: J. Inst. Metals, 1948-49, 75, 619, 693.
39. W. A. Wood, W. A. Rachinger: J. Inst. Met., 1949-50, 76, 237.
40. J. W. Kelly, R.C. Gifkins: J. Inst. Met., 1953-54, 82, 475-80
41. D. McLean: J. Inst. Met'. 1952-53, 81, 287-92.
42. G. R. Wilms: J. Inst. Met., 1954-55, 83, 427.
43. P. B. Hirsch: Progress in Metal Physics., 1957, 6, 261.
44. F. Garofalo: "Fundamentals of Creep and Creep Rupture in Metals", Macmillan, New York, 1965.
45. F. W. Hammad, W. D. Nix: Trans. ASM, 59, 94-104.
46. P. Feltham, R. A. Sinclair: J. Inst. Met., 1962-63, 91, 235-38.
47. F. Garofalo, C. Richmond, W.F. Domis and F. Von Gemmingen: "Proc. Joint Int. Conf. on Creep", Inst. Mech. Eng., London, 1963, 1963, pp. I31-I39.
48. C. R. Barrett, Acta Met., 1965, 13, 1088-91.
49. C. R. Barrett, W.D. Nix, and O.D. Sherby: ASM Trans Q., 1966, 59, 3-15.
50. P. Feltham and J. D. Meakin: Acta Met., 1959, 7, 614-27.
51. J. L. Lytton, K.H. Westmacott and L. C. Potter: Trans. TMSAIME, 1965, 233, 1757-65.
52. V. K. Lindroos, H.M. Miekk-oja: Phil. Mag., 1967, 16, 593-610
53. V. K. Lindroos, H.M. Miekk-oja: Phil. Mag., 1968, 17, 119-33.
54. R. C. Gifkins: J. Inst. Met., 1957-58, 86, 15-16
55. R. C. Gifkins: J. Inst. Met., 1958-59, 87, 255-61.
56. G. J. Richardson, C. M. Sellars and W. J. McG.Tegart: Acta Met., 1966, 14, 1225-36.
57. R.C. Gifkins: "Fracture", John Wiley, New York, 1959, pp. 579-629.
58. A. Gittins and C. M. Sellars: Met. Sci., 1972, 6, 118-22
59. P.R. Swann: "Electron Microscopy and Strength of Crystals", Interscience, New York, 1963, pp. 131-182.
60. F. R. N. Nabarro, Z. S. Basinski and D. B. Holt: Adv. Phys., 1964, 13, 193-323.
61. P.B. Hirsch, R.W. Horne and M.J. Whelan: "Dislocations and Mechanical Properties of Crystals", John Wiley, New York, 1957, p. 92.
62. P. A. Beck, B. G. Ricketts and A. Kelly: Trans. TMS - AIME, 1959, 215, 949.
63. P. Gay, P.B. Hirsch and A. Kelly: Acta Cryst. 1954, 7, 41-49.
64. A. Kelly, Acta Cryst, 1954, 7, 54-58.
65. A. Hone and E. C. Pearson, Metal Progress, 53 (1948) 363
66. H.J. McQueen, and W.B. Hutchinson, Deformation of Polycastals, N. Hansen et al., eds. (Riso Natl. Lab., Roskilde, DK 1981), pp. 335-342.
67. J.E. Bailey, Electron Microscopy and Strength of Crystals, New York, 1963 (Interscience), P. 535
68. P. H. Thornton and R. W. Cahn, J. Inst. Met., 1960-61, 89, 455
69. K.D. Bogardus, M.S. Hunter, M. Holt and G.R. Frank, Joint Int. Conf. On Creep, Inst. Mech. Engin., London, 1957, p. 117
70. J.H. Auld, R.I. Garrod, T.R. Thomson, Acta Metall., 1957, 5, 741
71. C.J. Ball: J. Iron Steel Inst., 1959, 191, 232-36.
72. D.H. Warrington: "European Regional Conf. on Electron Microscopy", Delft, 1960, p. 354.
73. D. Mayer: Mem. Scient. Revue Metall., 1961, 58, 574-80.
74. R. R. Arnold, R.J. Parker: J. Inst. Met., 1959-60, 88, 255-59.
75. W. Lueg and H. G. Miiller: Arch. Eisenh-Uttenwes, 1957, 28, 505-16.
76. J. A. Bailey and A. R. E. Singer: J. Inst. Met., 1963-64, 92, 404-08.
77. J. F. Alder, V. A. Phillips: J. Inst. Met., 1954-55, 83, 80-86.
78. J. E. Hockett: Proc. Am. Soc. Test. Mat., 1959, 59, 1309-19.
79. P. M. Cook: Proc. Conf. "Properties of Mat. at High Rates of Strain", Inst. Mech. Engin., London, 1957, pp. 86-97.
80. D. E. R. Hughes: J. Iron Steel Inst., 1952, 170, 214-20.
81. F. A. Hodierne: J. Inst. Met., 1962-63, 91, 267-73.
82. H. Ormerod and W. J. McG. Tegart: J. Inst. Met., 1960-61, 89, 94-96.
83. K. Tajima and K. Kugai: Tetsu to Hagane, 1956, 42, 980-85.
84. I. S. Servi and N. J. Grant: Trans. AIME, 1951, 191, 909.
85. J. Weertman: J. Mech. Phys. Solids, 1956, 4, 230-34.
86. H.J. McQueen and N.D. Ryan, Rate Processes in Plastic Deformation II, S.V. Raj et al. eds., TMS-AIME, Warrendale PA (2001), in press.
87. C. M. Sellars and W. J. McG Tegart: Mem. Scient. Revue Metall., 1966, 63, 731-46.
88. W. A. Wong and J. J. Jonas: Trans. TMS. AIME, 242 (1968) 2271-80
89. C. Zener, J. H. Hollomon: J. Appl. Phys., 1944, 15, 22-32.
90. R. Chadwick, Met. Rev., 4 [15] 189-255
91. H. K. Hardy: Metallurgia, 1944, 30, 240-44.
92. K.V. Gow, Acta Met., 2 (1954) 26
93. J. Schey: Acta Techn. Acad. Sc. Hung., 1957, 16, 131-52.
94. D. McLean and A. E. L. Tate: Revue Metall., 1951, 48, 765-75.
95. R. Leguet, D. Whi-twham and J. Herenguel: Mem. Scient. Revue Metall., 1962, 59, 649-71.
96. H. J. McQueen: Trans. Japan Inst. Met., 1968, 9, Suppl., 170-77.
97. J. P. Immarigeon and H. J. McQueen, Canad. Met. Quart., 1969, 8, 25-34.
98. D. Hardwick and W. J. McG. Tegart: Mem. Scient. Revue Metall. 1961, 58, 869-80
99. D. Hardwick and W. J. McG. Tegart: J. Inst. Met., 1961-62, 90, 17-21.
100. H.J. McQueen, E. Evangelista, N. Jin, M.E. Kassner Metal Trans 26A (1995), 1757-1766
101. H. Ormerod and W. J. McG Tegart: J. Inst. Met., 1963-64, 92, 297-99.
102. H. P. Stuwe: Z. Metallkde., 1965, 56, 633-42
103. H. P. Stuwe: Acta. Met., 1965, 13, 1337-42.
104. R. W. Evans and G. R. Dunstan: J. Inst. Met., 1971, 99, 4-14.
105. M. M. Farag, C. M. Sellars, and W. J. McG Tegart: "Deformation Under Hot-Working Conditions", Iron Steel Inst., London, 1968, pp. 60-67.
106. W. A. Wong, H. J. McQueen and J. J. Jonas: J. Inst. Met., 1967, 95, 129-37.
107. J. J. Jonas, H. J. McQueen and W. A. Wong: "Deformation Under Hot-Working Conditions", Iron Steel Inst., London, 1968, pp 49-59.
108. H. J. McQueen, W. A. Wong and J. J. Jonas: Can. J. Phys., 1967, 45, 1225-34.
109. H. J. McQueen, J. E. Hockett, Met. Trans. 1970, 1, 2997-3004.
110. D. J. Abson and J. J. Jonas: Met. Sci. 1970, 4, 24-28.
111. J. J. Jonas, C. M. Sellars and W. J. McG. Tegart, Metall. Rev., 1969, 4, 1.
112. J. McQueen and J. J. Jonas, Treatise on Materials Science and Technology, Vol. 6, Plastic deformation of Materials, 1975 New York, p.293
113. J. McQueen, W. J. McG. Tegart, Sci. Am., 1975, 232 (4), 116
114. C.M. Sellars, W.J. McG. Tegart, Int. Met. Rev., 1972, 17, 1.
115. W.J. McG. Tegart, Ductility, Metals Park, Ohio, 1968 (Amer. Soc. Metals), P.133.
116. H.J. McQueen, J. Sankar and S. Fulop, Mechanical Behavior of Materials (Proc. ICM3, Cambridge), London, 1979 (Pergamon Press), Vol.2, P.675.
117. H.J. McQueen and J.J. Jonas, Manufacturing Eng. Trans. (SME), 1973, 2, 209
118. C.M. Sellars, Phil. Trans. Roy. Soc., A288, (1978) 147-158.
119. H. J. McQueen, J. Metals, 1980, 32, [2], 17-26.
120. H. J. McQueen: Met. Trans., 1977, 8A, 807-24.
121. H. J. McQueen and J. J. Jonas. "Metal Forming: Interrelation Between Theory and Practice", Plenum, New York, 1971, pp.393-428.
122. H.J. McQueen and J.J. Jonas, J. Appl. Metal Working, 3 (1984) 233-241, 410-420.
123. T. Sakai and J.J. Jonas, Acta Metall. 32 (1984) 189-209.
124. A H.J. McQueen, Mat. Sci. Eng., A101 (1987), 149-160.
125. B H.J. McQueen, E. Evangelista and N.D. Ryan, Recrystallization ('90) in Metals and Materials. T. Chandra, TMS-AIME, Warrendale, PA (1990) pp. 89-100
126. H.J. McQueen and H. Mecking, Creep and Fracture of Engineering Materials and Structures, Pineridge Press, Swansea, UK (1984), pp. 169-184.
127. H.J. McQueen and M.E. Kassner, Superplasticity in Aerospace, II. T.R. McNelley and H.C. Herkkenen, eds., TMS-AIME, (1991), pp. 189-206.
128. W. Blum and H.J. McQueen, Aluminum Alloys. Physical and Mechanical properties. (ICAA5, J.H. Driveretal), eds. Mat. Sci. Forum, 217-222 (1996) 31-42.
129. H.J. McQueen and W. Blum, Recrystallization and Related Topics. (Rex '96), T.R. McNelly, ed., Monterey Inst. Advanced Studies, CA. (1997) pp. 123-136.
130. H.J. McQueen and W. Blum, Al Alloys Physical and Mechanical Properties. 8ICAA6, T. Sato, ed.9, Japan Inst. Metals (1998) pp. 99-112.
131. E. Evangelista, N.D. Ryan and H.J. McQueen, Metal. Sci. Tech., 9, (1991), pp. 75-92.
132. H. Mecking, and G. Gottstein, Recrystallization of Metallic Materials. F. Haessner, ed. Dr. Reidereer Verlag Stuttgart (1977), pp. 195-212.
133. H.J. McQueen and M.E. Kassner, Superplasticity in Aerospace, H.C. Heikkenen and T.R. McNelley, eds., Met. Soc. AIME, Warrendale PA, (1988), pp. 77-96.
134. E. Evangelista et al. Mat Sci Eng (1995) A197, 181-198
135. H.J.McQueen, E. Evangelista, M.E. Kassner, Z. Metallkde. 82 (1991) 336-345
136. H.J. McQueen, H. Chia and E.A. Starke, Microstructural Control in Al Alloy Processing, H. Chia, H.J. McQueen, eds., TMS-AIME, Warrendale, PA., (1985), pp. 1-18.
137. H.J. McQueen, G. Avramovic-Cingara, K. Conrod, Can. Metal. Quart., 32, (1993), 375-386.
138. H.J. McQueen, Hot Deformation of Aluminum Alloys, Detroit, Oct. 1990, T.G. Langdon and H.D. Merchant, eds., TMS-AIME, Warrendale, PA, 1991, pp. 105-120.
139. T. Sheppard, M.G. Tutcher and H.M. Flower, Met. Sci. 13 (1979) 473-481
140. H.J. McQueen, E. Evangelista, J. Bowles and G. Crawford Met. Sci. 18 (1984) 395-402
141. H.J. McQueen
142. W. Blum, Q. Zhu, R. Merkel and H.I. McQueen, Z. Metallkde, 87 (1996) 341-348.
143. W. Blum, Q. Zhu, R. Merkel and H.J. McQueen, Mat. Sci. Eng., A205, (1996) 23-30.
144. G.A. Henshall, M.E. Kassner and H.J. McQueen, Metal. Trans., 23A (1992) 881-889.
145. I. Poschmann and H.J. McQueen, Scripta Metal. Mat., 35, (1996), 1123-1128.
146. E.V. Konopleva, H.J. McQueen and E. Evangelista, Materials Characterization, 34, (1995), 341-348
147. E. Cerri, E. Evangelista and H.J. McQueen, High Temp. Mat. Proc., 18, (1999), 227-240.
148. M.E. Kassner, M.M. Myshlyaev and H.J. McQueen, Mat. Sci. Eng., A108 (1989) 45-61.
149. M.M. Myshlyaev, O.N. Senkov, and V.A. Likchaev, Strength of Metals and Alloys, ICSMA 7, H.J. McQueen et al., eds., Pergamon Press, Oxford (1985), Vol.2, pp. 841-846.
150. O. Knustad, H.J. McQueen, N. Ryum and J.K. Solberg, Practical Metal., 22 (1985), 215-229.
151. J.K.Solberg, H.J.M.McQueen, N.Ryum and E.Nes, Phil. Mag., 60 (1989) 447-471; 473-485.
152. M.E. Kassner and M.E. McMahon, Met. Trans., 18A (1987) 835-846.
153. H.J. McQueen, Proc. ICOTOM 12, J.A. Szpunar, ed., NRC Res. Pub. Ottawa (1999), pp. 836-841.
154. B. Drube and H.P. Stiiwe: Z. Metallkde., 1967, 58, 799-804.
155. L. Gavard and M. Montheillet and H.J. McQueen, Proc. OTOM 12, J.A. Szpunar, ed., NRC Res. Pub., Ottawa (1999), pp. 878-883.
156. M. Hatherley, Strength of Metals and Alloys (ICSMA6), R.C. Gifkins ed., (Pergamon Press, Oxford, 1982), Vol. 3, pp. 1181-95.
157. B. Bay, N. Hansen, D.A. Hughes and D. Kuhlmann-Wilsdorf, Acta. Metal. Mat., 40, (1992), 205-219.
158. D.A. Hughes and N. Hansen, Advances in Hot Deformation Textures and Microstructures, J.J. Jonas et al. eds. (TMS-AIME, Warrendale, PA 1995), pp. 427-444.
159. D.A. Hughes and A. Godfrey, Hot Deformation of Al Alloys II, T.R. Bieler et al., eds. TMS, AIME, Warrendale, PA., (1998), pp. 23-36.
160. M. Richert, H.J. McQueen and J. Richert, Can. Metal. Quart., 37, (1998), 449-457.
161. C.S. Barrett, L.H. Levenson, Trans. AIME 137 (1990) 112-127.
162. D. Kuhlman-Wilsdorf, Acta Mater., 47, (1999), 1697-1712.
163. B. Jaoul, Etude de la Plasticitè et Application aux Mètaux, Dunod, Paris (1965).
164. S. Gourdet and F. Montheillet, Mat. Sci. Eng., A283, (2000), 274-288.
165. S. Gourdet, E.V. Konopleva, H.J. McQueen and F. Montheillet, Mat. Sci. Forum 217-222 (1996), pp. 441-446.
166. S. Gourdet, C. Chovet, and H.J. McQueen, Alum. Trans. 3 (2001) 59-68
167. H.J. McQueen Light Metals 2000, J. Kazadi et al. eds., MetSoc CIM, Montreal (2000), pp. 287-296
168. H.J. McQueen, W. Blum, S. Straub and M.E. Kassner, Scripta Metal Mat., 28, (1993), 1299-1304.
169. M.E. Kassner, H.J. McQueen, J. Pollard, E. Evangelista and E. Cerri, Scripta Metal. Mat., 1 (1994) 1331-1396.
170. H. Yamagata, Scripta Metal. Mat., 21 (1992) 1157-1160.
171. H. Yamagata, Scripta Metal. Mat. 23 (1994) 411-416.
172. F.J. Humphreys and P. Kalu, Acta Metal., 35, (1987), 2815-29
173. B.M. Watts, M.J. Stowell, B.L. Baikie and D.G. Owen, Met. Sci., 10,(1976), 189-197, 198-205.
174. R.H. Bricknell and J.W. Edington, Acta Metal., 27 (1979), 1303-1311.
175. S.J. Hales, T.R. McNelley and H.J. McQueen, Metal. Trans., 22A, (1991), 1037-1047.
176. H.J. McQueen and E. Evangelista, Czech J. Physics, B38 (1988) 359-372