Overview of the high temperature substructure development in Al-Mg alloys

High Temperature Materials and Processes

Volumn 18, Issue 4, 1999, Pages 227-240

  Cerri, E ^a   Evangelista, E ^c   McQueen, H J ^b  

^a INFM   (Italy)

^b Gina Cody School of Engineering and Computer Science   (Canada)

^c Mech Eng Concordia University ^*

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; HOT WORKING; MAGNESIUM; METALLOGRAPHIC MICROSTRUCTURE; OPTICAL MICROSCOPY; RECRYSTALLIZATION (METALLURGY); SCANNING ELECTRON MICROSCOPY; SOLID SOLUTIONS; THERMAL STRESS; TRANSMISSION ELECTRON MICROSCOPY;

GEOMETRIC DYNAMIC RECRYSTALLIZATION; HIGH TEMPERATURE SUBSTRUCTURE; SOLUTE; SUBGRAIN BOUNDARIES;

ALUMINUM ALLOYS;

EID: 0032668930     PISSN: 03346455     EISSN: None     Source Type: Journal    
DOI: 10.1515/HTMP.1999.18.4.227     Document Type: Article

References (62)

1. H.J. McQueen and M.E. Kassner, Superplasticity in Aerospace II, T.R. McNelley, ed. TMS-AIME, Warrendale, PA, 1990; pp. 189-206.
2. H.J. McQueen, Hot Deformation of Aluminum Alloys, T.G. Langdon et al., eds., TMS-AIME, Warrendale, PA, 1991; pp. 31-54.
3. H.J. McQueen E. Evangelista and M.E. Kassner, Z. Metallkde, 82, 336-345 (1991).
4. H.J. McQueen and O.C. Celliers, Can. Metal. Quart., 35, 303-319 (1996).
5. M. E. Kassner, Hot Workability of Steels and Light Alloys-Composites, H.J. McQueen, E.V. Konopleva and N.D. Ryan (eds.), Met. Soc. CIM, Montreal, 1996; pp. 217-226.
6. W. Blum and H.J. McQueen, Aluminum Alloys, Physical and Mechanical Properties, (ICAA4, Grenoble), Mat.Sci.Forum 217-222, 31-42 (1996).
7. H.J. Oikawa, K. Sugawara and S. Karashima, Trans, J. Inst. Met., 19, 611 (1978).
8. P. Yavari, F.A. Mohamed and T.G. Langdon, Acta Metal., 29, 1495-1507, (1981).
9. H. Yoshinaga and H. Oikawa, Strength of Materials (ICSMA 10) H. Oikawa et al. eds., Japan Inst. Metals, Tokyo, 1994; pp. 49-56.
10. W. Blum, Hot Deformation of Al Alloys, T.G. Langdon et al, eds., TMS-AIME Warrendale PA, 1991; pp. 181-210.
11. W. Blum, Plastic Deformation and Creep of Crystalline Materials. In: H. Mughrabi editor, Plastic Deformation and Fracture of Materials, Vol. 6 of Materials Science and Technology, ed. by R. W. Cahn, P. Haasen and E.J. Kramer, VCH Verlagsgesellschaft, Weinheim, 1993; pp. 359-405.
12. E. Wechert and W. Blum, Strength of Metals and Alloys (ICSMA 7), H.J. McQueen, et al., eds., Pergamon Press, Oxford, 1985; Vol I, pp. 773-778.
13. A. Orlova and J. Cadek, Z. Metallkd. 65, 2200-2204 (1974).
14. E.C.W. Perryman, TransAIME, 203, 369-378, (1955).
15. H.M Tensi, P. Dropman and H. Borchers, Z. Metallkd., 61, 513-519, (1970).
16. W. Truszkowski, A. Pawlowski and J. Dutkiewicz, Bull. Acad. Pol. Sci., 19, 55-61 (1971).
17. H.J. McQueen, W. Blum, Q. Zhu and V. Demuth, Advances in Hot Deformation, Textures and Microstructures, J.J. Jonas, et al. eds., TMS-AIME, Warrendale, PA, 1994;, pp.235-250.
18. J.R. Cotner and W.J. McTegart, J. Inst. Metals, 97, 73-79 (1969).
19. M. Raghaven and E. Shapiro, Metall. Trans. A, 11A, 117-121 (1980).
20. H.J. McQueen and N. Ryum, Scand. J. Met 14, 183-194 (1985).
21. T. Sheppard, M.A. Zaidi, M.G. Tutcher and N.C. Parson, Microstructural Control in Al Alloy Processing, H. Chia and H.J. McQueen, eds. TMS-AIME, Warrendale, PA, 1985; pp. 155-178.
22. J.J. Urcola and G.M. Sellars, Acta Metals, 35, 2637-2669 (1987).
23. F.R. Castro-Fernandez and C.M. Sellars, Mat. Sci. Tech., 4, 621-627 (1988).
24. H.J. McQueen, E. Evangelista, J. Bowles and G. Crawford, Met. Sci., 18, 395-402 (1984).
25. T. Sheppard and M.G. Tutcher, Met. Sci., 14, 579-589 (1980).
26. T. Sheppard and M.G. Tutcher, Met. Tech., 8, 319-327 (1981).
27. F.J. Humphreys and P. Kalu, Acta Metal., 35, 2815-2829 (1987).
28. L. Ivanchev and D. Chavdarova, Proc. Intnl. Symp. Plasticity and Resistance to Metal Deformation, S. Blecic, et al., eds., Fac. Metallurgy, Titograd, 1986; pp. 348-361.
29. H.J. McQueen and M.E. Kassner, Superplastidty in Aerospace, H.C. Heikkenen and T.R. McNelley, eds. (Met. Soc. AIME, Warrendale, PA, 1988; 77-96.
30. W. Blum, Q. Zhu, R. Merkel, and H.J. McQueen, ICAA5, Mat. Sci. Forum, 217-222, 611-616 (1996).
31. W. Blum, Q. Zhu, R. Merkel and H.J. McQueen, Mat. Sci. Eng., A205, 23-30 (1996).
32. E.M. Taleff, D.R. Lesuer and J. Wadsworth, Metal. Mater. Trans. 27A, 343-352 (1996).
33. K.G. Gardner and R. Grimes, Metal Sci., 13, 216-222 (1979).
34. J.K. Solberg, H.J. McQueen, N. Ryum and E. Nes, Phil. Mag. 60, 447-471 (1989).
35. M.E. Kassner and M.E. McMahon, Metall. Trans., 18A, 835-846 (1987).
36. G.A. Henshall, M.E. Kassner and H.J. McQueen, Metall Trans., 23A, 881-889 (1992).
37. G.A. Henshall, M.E. Kassner and H.J. McQueen, Scripta Metal. Mat., 28, 151-156 (1993).
38. Q. Zhu, V. Demuth, W. Blum and H.J. McQueen, Strength of Materials (ICSMA/10, Sendai H. Oikawa et al., eds., Japan Inst. Metals, 1994; pp. 803-806.
39. W. Blum, Q. Zhu, R. Merkel and H.J. McQueen, Z. Metalkde, 87, 14-23 (1996).
40. Q. Zhu, W. Blum and H.J. McQueen, ICAA5, Mat. Sci. Forum 217-222, 1169-1174 (1996).
41. H.J. McQueen and I. Poschman, (ICSMA 11), Mat. Sci. Eng. A234-236, 830-833 (1997).
42. I. Poschmann and H.J. McQueen, Z. Metallkde, 88, 14-22 (1996).
43. I. Poschmann and H.J. McQueen, Scripta Met. Mat. 35, 1123-1128 (1996).
44. F.J. Humphreys and M.R. Drury, Aluminum Technology, T. Sheppard, ed., Inst. Metals, London, 1986; pp. 191-196,.
45. M.R. Drury and F.J. Humphreys, Acta Metal. 34, 2259-2271 (1986).
46. E. Cerri, E. Evangelista and H.J. McQueen, Hot Workability of Steels and Light Alloys-Composites, H.J. McQueen, E.V. Konopleva and N.D. Ryan (eds.), Met. Soc. CIM, Montreal, 1996; pp 27-36.
47. Q. Zhu, H.J. McQueen and W. Blum,.High Temp. Mater. Process. (1998) (in press).
48. E. Cerri, E. Evangelista and H.J. McQueen, (ICSMA 11), Mat. Sci. Eng., A234-236, 373-377 (1997).
49. T.S. Lundy and J.F. Murdock, J. Appl. Phys., 33, 1671 (1962).
50. G. Moreau, J.A. Cornet, D. Calais, J. Nucl. Mater., 38, 197 (1971).
51. H.J. McQueen and J.E. Hockett, Met. Trans., 1, 2997-3004 (1970).
52. H.J. McQueen, Met Trans, 8A, 807-824 (1977).
53. H.J. McQueen and W. Blum, Aluminium (1998) (in preparation).
54. H.J. McQueen and I. Poschmann, THERMEC '97 (Woolongong, Australia) T. Chandra, ed., TMS-AIME, Warendale, PA 1997; pp. 951-957.
55. H.J. McQueen, N.D. Ryan, E.V. Konopleva and X. Xia, Can. Metal. Quart. 34, 219-229 (1995).
56. E.V. Konopleva, H.J. McQueen and W. Blum, Microstructural Science, (Intnl. Met. Soc. Conf., Montreal, 1994), 22, 283-293 (1995).
57. E.V. Konopleva, H.J. McQueen and E. Evangelista, Materials Characterization., 34, 251-264. (1995).
58. O. Knustad, H.J. McQueen, N. Ryum and J.K. Solberg, Practical Metal, 22, 215-229 (1985).
59. M.E. Kassner, M.M. Myshlyaev and H.J. McQueen, Mat. Sci. Eng., A108, 45-61 (1989).
60. S.R. Chen and U.F. Kocks, Hot Deformation of Aluminum Alloys, T.G. Langdon et al., eds., TMS-AIME, Warrendale, PA, 1991; pp. 89-104.
61. S.R. Chen and U.F. Kocks, Advances in Hot Deformation Textures and Microstructures, J.J. Jonas, et al., eds., TMS-AIME, Warrendale, PA., 1994; pp. 469-476.
62. H.J. McQueen, E. Evangelista, N. Jin and M.E. Kassner, Advances in Hot Deformation, Textures and Microstructures, J.J. Jonas, et al. eds. TMS-AIME, Warrendale, PA, 1994; pp. 251-266.