Hot deformation of hypereutectoid steels

Materials Science Forum

Volumn 426-432, Issue 2, 2003, Pages 865-870

  McQueen, H J ^a   Imbert, C A C ^b   Sherby, O D ^c  

^a Dept of Electrical and Computer Engineering   (Canada)

^b UNIVERSITY OF THE WEST INDIES   (Trinidad and Tobago)

^c STANFORD UNIVERSITY   (United States)

Author keywords

Constitutive equations; Hot ductility; Hot working; Hypereutectoid steels; Tool steels

Indexed keywords

AUSTENITIC TRANSFORMATIONS; CARBIDES; COOLING; CRACKS; DUCTILITY; GRAIN BOUNDARIES; HOT WORKING; PLASTIC FLOW; VOLUME FRACTION;

DYNAMIC RECRYSTALLIZATION (DRX);

CARBON STEEL;

EID: 0038340136     PISSN: 02555476     EISSN: 16629752     Source Type: Book Series    
DOI: 10.4028/www.scientific.net/msf.426-432.865     Document Type: Conference Paper

References (46)

1. M. Carsi, A. Fernandez-Vicente, O.A. Ruano and O.D. Sherby, Mat. Sci. Tech., 15, (1999), 1087-11395.
2. D.R. Lesuer, C.K. Syn, J.D. Whitenberger, O.A. Ruano, M. Carsi and O.D. Sherby, Mat. Sci. Eng., A317, (2001), 101-107.
3. D.R. Lesuer, C.K. Syn, J.D. Whitenberger and O.D. Sherby, Int. J. Plasticity, 18, (2002), 155-184.
4. J. Wadsworth, Deformation, Processing and Properties of Structural Materials. E.M. Taleff et al. eds., TMS-AIME Warrendale PA, (2000), pp. 3-24.
5. B. Walser and O.D. Sherby, Met. Trans, 10A (1979) 1461-1471.
6. J. Wadsworth and O.D. Sherby, Thermomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons, D.R. Lesuer et al., eds. TMS-AIME, Warrendale, PA (1996) pp 1-40.
7. C.A.C. Imbert, N.D. Ryan and H.J. McQueen, Metall. Trans., 15A (1984) 1855-1864.
8. C.A.C. Imbert and H.J. McQueen, Mat. Sci. and Eng., A313, (2001) 88-103, 104-116.
9. C.A.C. Imbert and H.J. McQueen, Mat. Sci. Tech., 16, (2000) 524-531, 532-538.
10. H.J. McQueen and C. Imbert, Thermomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons, D.R. Lesuer et al. eds., TMS-AIME, Warrendale, PA, (1997) pp 55-66.
11. H.J. McQueen and C.A.C. Imbert, Deformation, Processing and Properties of Structural Materials, E.M. Taleff et al. eds., TMS-AIME Warrendale PA, (2000), pp. 79-92.
12. C.A.C. Imbert and H.J. McQueen, Can. Metal Quart., 40, (2001), 235-244.
13. C.M Sellars and W.J. McG. Tegart, Int. Metall. Rev., 17 (1972) 1-24.
14. W.J.McG. Tegart and A. Gittins, The Hot Deformation of Austenite, J.B. Ballance, ed., TMS-AIME, Warrendale, PA, 1977, pp. 1-46.
15. W. Roberts, Strength of Metals and Alloys (ICSMA 7), H.J. McQueen et al., eds., Pergamon Press, Oxford, 1985, Vol. 3, pp. 1859-1892.
16. H.J. McQueen and D.L. Bourell, J. Met., 39 [7] (1987) 28-35.
17. H.J. McQueen, S. Yue, N.D. Ryan & E. Fry, J. Mat.Proc.Tech., 53, (1995) 293-310.
18. H.J. McQueen, N.D. Ryan, R. Zaripova and K. Farkhutdinov, Proc. 37 Mech. Working and Steel Processing Conf., Iron and Steel Soc., AIME, Warrendale, PA, 1996, pp. 883-894.
19. H.J. McQueen, E. Evangelista and N.D. Ryan, Recrystallization ('90) in Metals and Materials, T. Chandra, ed., TMS-AIME, Warrendale, PA, 1990, pp. 89-100.
20. H.J. McQueen, CIM Bulletin, (2003) (in press).
21. H.J. McQueen, Hot Deformation of Aluminum Alloys, T.G. Langdon et al., eds., TMS-AIME, Warrendale, PA, 1991, pp. 31-54.
22. H.J. McQueen, Thermomechanical Processing of Steel (Jonas Symposium). S. Yue, E. Essadiqi eds., Met. Soc. CIM, Montreal (2000) pp. 323-333.
23. H.J. McQueen, N.D. Ryan and E. Evangelista, Mat. Sci. Eng., 81 (1986) 259-272.
24. E. Evangelista, N.D. Ryan and H.J. McQueen, Met. Sci. Tech., 5 (1987) 50-58.
25. N.D. Ryan and H.J. McQueen, High Temp. Tech., 8 (1990) 27-44.
26. N.D. Ryan and H.J. McQueen, High Temp. Tech., 8 (1990) 185-200.
27. N.D. Ryan and H.J. McQueen, J. Mat. Proc. Tech., 20 (1990) 177-199.
28. N.DRyan and H.J.McQueen, Stainless Steels '87. Inst. of Metals, London, (1987) pp. 498-507.
29. H.J. McQueen, J. Bowles and N.D. Ryan, Microstruc. Sci., 19, (1989) 357-373.
30. N.D. Ryan and H.J. McQueen, Mat. Sci. Tech., 7 (1991) 818-826.
31. N.D. Ryan and H.J. McQueen, J. Mat. Proc. Tech., 36 (1993) 103-123.
32. M. G. Akben, I. Weiss and J.J. Jonas, Acta Metall., 29 (1981) 111.
33. R.A. Petkovic, M.J. Luton and J.J. Jonas, Can. Metall. Q., 14 (1975) 137-145.
34. C.M. Sellars and J.H. Beynon, High Strength Low Alloy Steels, D.P. Dunne and T. Chandra. eds., South Coast Printers, Port Kembla, NSW, (1985) pp. 142-150.
35. H.J. McQueen, O.Overdal, A.Cingara and H.Gjestland, Mat. High Temp., 10. (1992) 207-218.
36. T. Matuszewski, H.J. McQueen and P.M. Machmeier, Metall. Mat. Trans., 25A, (1994), 827-837.
37. V.M. Khlestov, E.V. Konopleva and H.J. McQueen, Can. Metal. Quart., 37, (1998) 75-89.
38. H.J. McQueen and N.D. Ryan, High Temp. Mat., Proc., 12, (1993), 87-96.
39. N.D. Ryan and H.J. McQueen, J. Mech. Working Tech., 12 (1986) 279-296, 323-349.
40. N.D. Ryan and H.J. McQueen, Strength of Metals and Alloys (ICSMA 9). D.G. Brandon et al. eds., Freund Pub., London, (1991), pp. 359-366.
41. H.J. McQueen, Metal. Mat Trans, 33A (2002) 345-362.
42. S. Strub and W. Blum, Hot Workability of Steels and Light Metals Composites, H.J. McQueen et al., eds., Met. Soc. CIMM, Montreal, (1996), pp. 189-204.
43. V.M. Khlestov, E.V. Konopleva and H.J. McQueen, Mat. Sci. Tech 18 (2002), 54-60.
44. H.J. McQueen, E. Evangelista, and N.D. Ryan, Thermomechanical Processing; Mechanics. Microstructure, Control, J.H. Beynon ed., Inst. Materials, London (2002), in press
45. M.J. Harrigan and O.D. Sherby, Mater. Sci. Eng., 7. (1971) 177-189.
46. E.A. Chojnowski and W.J. McG. Tegart, Metal Sci. J., 2, (1968) 14-18.