Slip line fracture mechanics: A new regime of fracture mechanics

ASTM Special Technical Publication

Volumn , Issue 1417, 2002, Pages 3-54

  McClintock, Frank A ^a  

^a Massachusetts Institute of Technology Cambridge   (United States)

Author keywords

Cleavage; Continuing crack growth; Crack path; Crack tip opening angle; Crack tip opening displacement; Elastic plastic; Finite element; Fracture mechanics; Fully plastic; Hole; Initial crack growth; Linear elastic; Mixed mode; Non linear elastic; Power law; Slip line; Void

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; ELASTOPLASTICITY; FINITE ELEMENT METHOD; PLASTIC DEFORMATION; STEEL; STRAIN; STRESSES;

CLEAVAGE; CONTINUING CRACK GROWTH; CRACK PATH; CRACK TIP OPENING ANGLE; CRACK TIP OPENING DISPLACEMENT; INITIAL CRACK GROWTH; LINEAR ELASTIC; MIXED MODE; NON-LINEAR ELASTIC;

FRACTURE MECHANICS;

EID: 0036970447     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (94)

1. Ponte Castanẽeda, P., "Asymptotic Analysis of a Mode I Crack Propagating Stead-ily in a Deformation Theory Material," Transactions of the American Society of Mechanical Engineers, Vol. 109, Journal of Applied Mechanics, Vol. 54, 1987, pp. 79-86.
2. Ernst, H. A., "Material Resistance and Instability Beyond J-controlled Crack Growth," Elastic-Plastic Fracture: Second Symposium, Volume I-Inelastic Crack Analysis, ASTM STP 803, American Society for Testing and Materials, Philadelphia PA, 1986, pp. I-191-I-213.
3. Ritchie, R. O., Knott, J. F., and Rice, J. R., "On the Relationship Between Critical Tensile Stress and Fracture Toughness in Mild Steel," Journal of the Mechanics and Physics of Solids, Vol. 21, 1973, pp. 395-410.
4. McClintock, F. A., "A Criterion for Ductile Fracture by the Growth of Holes," Transactions of the American Society of Mechanical Engineers, Vol. 90, Journal of Applied Mechanics, Vol. 35, 1968, pp. 363-371.
5. McClintock, F. A., Kaplan, S. M., and Berg, C. A., "Ductile Fracture by Hole Growth in Shear Bands," International Journal of Fracture Mechanics, Vol. 2, 1966, pp. 614-627.
6. Tvergaard, V., "Material Failure by Cavity Nucleation Between Larger Voids," Journal of the Mechanics and Physics of Solids, Vol. 30, 1982, pp. 265-286.
7. Tvergaard, V., "Material Failure by Void Growth to Coalescence," Advances in Applied Mechanics Vol. 27, J. W. Hutchinson and T. Y. Wu, Eds., Academic Press, New York, NY, 1990, pp. 83-151.
8. Neimark, J. E., "The Fully Plastic Plane Strain Tension of a Notched Bar," Transactions of the American Society of Mechanical Engineers, Vol. 90, Journal of Applied Mechanics, Vol. 35, 1968, pp. 111-116.
9. Cockroft, A. D., "Ductile Fracture in Cold Working Operations," Ductility, H. W. Paxton, Ed., American Society for Metals, Metals Park OH, 1968, pp. 199-225.
10. Becker, R., "An Analysis of Shear Localization During Bending of a Polycrystalline Sheet," Transactions of the American Society of Mechanical Engineers, Vol. 114, Journal of Applied Mechanics, Vol. 59, 1992, pp. 491-496.
11. Griffith, A. A., "The Phenomena of Rupture and Flow in Solids," Philosophical Transactions of the Royal Society (London), Vol. A221, 1920, pp. 163-198.
12. Griffith, A. A., "The Theory of Rupture," Proceedings of the First International Congress of Applied Mechanics, Delft, 1924, pp. 55-63.
13. Orowan, E., "Notch Brittleness and the Strength of Metals," Transactions, Institution of Engineers and Shipbuilders in Scotland, Vol. 89, 1945, pp. 165-215.
14. Orowan, E., "Fracture and Strength of Solids," Reports on Progress in Physics, Vol. 12, 1949, pp. 185-232.
15. Irwin, G. R. "Fracture Dynamics," Fracturing of Metal, F. Jonassen, W. P. Roop, R. T. Bayless, Eds., American Society for Metals, Cleveland OH, 1948, pp. 147-166.
16. Irwin, G. R., "Analysis of Stresses and Strains Near the End of a Crack," Transactions of the American Society of Mechanical Engineers, Vol. 79, Journal of Applied Mechanics, Vol. 24, 1957, pp. 361-364.
17. Williams, M. L, "On the Stress Distribution at the Base of a Stationary Crack," Transactions of the American Society of Mechanical Engineers, Vol. 79, Journal of Applied Mechanics, Vol. 24, 1957, pp. 109-114.
18. Rossmanith, H. P., "George Rankin Irwin - The Father of Fracture Mechanics," Cleavage Fracture, George R Irwin Symposium, K. S. Chan, Ed., The Minerals, Metals & Materials Society (TMS), Warrendale PA, 1997, pp. 3-38.
19. Wieghardt, K. (1907), "Über das Spalten und Zerreissen elastischer Körper," Zeit-schrift Mathematik und Physik, Vol. 55(1-2), pp. 60-103.
20. Wieghardt, K. "On Splitting and Cracking of Elastic Bodies," H. P. Rossmanith translation of Wieghardt (1907), Fatigue and Fracture of Engineering Materials and Structures, Vol. 12, 1995, pp. 1371-1405.
21. McClintock, F. A., and Irwin, G. R. "Plasticity Aspects of Fracture Mechanics," Fracture Toughness Testing and its Applications, ASTM STP 381, W. F. Brown Jr., Ed., American Society for Testing and Materials, Philadelphia PA, 1965, pp. 84-113.
22. Barenblatt, G. I., "On the Equilibrium Cracks Due to Brittle Fracture," Doklady Akademii Nauk SSSR, Vol. 127, 1959, 47-50.
23. Leonov, M. Ya., and Panasyuk, V. V., "The Development of the Smallest Cracks in Solids," Prikladnaia Mekhanika, Vol. 5, No. 4, 1959, pp. 391-401.
24. Dugdale, D. S., "Yielding of Steel Sheets Containing Slits," Journal of the Mechanics and Physics of Solids, Vol. 8, 1960, pp. 100-104.
25. McClintock, F. A., "Crack Growth in Fully Plastic Grooved Tensile Specimens," Physics of Strength and Plasticity, A. S. Argon, Ed., MIT Press, Cambridge MA, 1969, pp. 307-326.
26. McClintock, F. A., "Ductile Fracture Instability in Shear," Transactions of the American Society of Mechanical Engineers, Vol. 80, Journal of Applied Mechanics, Vol. 25, 1958, pp. 581-588.
27. McClintock, F. A., "Plasticity Aspects of Fracture," Fracture Vol. 3, H. Liebowitz, Ed., Academic Press, New York NY, 1971, pp. 47-225, esp. pp. 51, 64-70, 145, 155-162.
28. Farkas, D. "Atomistic Studies of Intrinsic Crack-Tip Plasticity," MRS Bulletin, Vol. 25, No. 5, 2000, pp. 35-38.
29. Gumpsch, P., "Modelling Brittle and Semi-Brittle Fracture Processes," Materials Science and Engineering, Vol. A319-321, 2001, pp. 1-7.
30. Ishikawa, N., Parks, D. M., Kurihara, M., "Micromechanism of Ductile Crack Initiation in Structural Steels," Iron and Steel Institute of Japan International, Vol. 40, No. 5, 2000, pp. 519-527.
31. Gurson, A. L., "Continuum Theory of Ductile Rupture by Void Nucleation and Growth. Part I Yield Criterion and Flow Rules for Porous Ductile Materials," Journal of Engineering Materials and Technology, Vol. 99, 1977, pp. 2-15.
32. Tvergaard, V., and Needleman, A., "Analysis of the Cup-Cone Fracture in a Round Tensile Bar," Acta Metallurgica, Vol. 32, 1984, pp. 157-169.
33. Il'yushin, A. A., "The Theory of Small Elastic-Plastic Deformation," Prikladnaia Matematika i Mekhanika, PMM, Vol. 10, 1946, pp. 347-356.
34. Chang, S. J., and Witt, F. J., "Application of the J-Integral to Obtain Some Similarity Relations," Fracture Analysis, ASTM STP 560, American Society for Testing and Materials, Philadelphia PA, 1974, pp. 226-239, esp. pp. 232-3.
35. Tada, H., Paris, P. C., and Irwin, G.R., The Stress Analysis Handbook, 3rd Ed., ASME Press, New York, NY and ASM International, Materials Park OH, 2000.
36. Rooke, D. R. and Cartwright, D. J., Compendium of Stress Intensity Factors, Hillingdon, Uxbridge, England, 1987.
37. Murakami, Y., et al., Eds. Stress Intensity Factors Handbook, 3rd Ed., Pergamon Press, Oxford, 2001.
38. Hudson, C. M., and Seward, S. K., "Compendium of Sources of Fracture Toughness and Fatigue Crack Growth Data for Metallic Alloys," International Journal of Fracture, Vol. 14, 1978, R151-R184.
39. Hudson, C. M., and Seward, S. K., "Compendium of Sources of Fracture Toughness and Fatigue Crack Growth Data for Metallic Materials, Part II," International Journal of Fracture, Vol. 20, 1982, R59-R117.
40. Laukanen, A., Wallin, K., and Rintamaa, R., "Evaluation of the Effects of Mixed-Mode I-II Loading on Elastic-Plastic Ductile Fracture of Metallic Materials," Mixed-Mode Crack Behavior, ASTM STP 1359, K. J. Miller and D. L. McDowell, Eds., American Society for Testing and Materials, West Conshohocken PA, 1999, pp. 3-20.
41. Hutchinson, J. W., "Singular Behavior at the End of a Tensile Crack in a Hardening Material," Journal of the Mechanics and Physics of Solids, Vol. 16, 1968, pp. 13-31.
42. Rice, J. R. and Rosengren, G. F., "Plane Strain Deformation near a Crack Tip in a Power-Law Hardening Material," Journal of the Mechanics and Physics of Solids, Vol. 16, 1968, pp. 1-12.
43. Shih, C. F., "Tables of Hutchinson-Rice-Rosengren Singular Field Quantities," Report from Division of Engineering, Brown University, Providence, RI 02912, June 1983.
44. Kanninen, M. F. and Popelar, C. H., Advanced Fracture Mechanics, Oxford University Press, New York, NY, 1985, esp. p. 309.
45. Anderson, T. L., Fracture Mechanics, Fundamentals and Applications, CRC Press, Boca Raton FL, 1991, esp. pp. 440-449.
46. Joyce, J.A., and McClintock, F.A., "Predicting Ductile Fracture Initiation in Large Parts", Strength and Structure of Solid Materials, 1976, pp. 157-181.
47. Chao, Y. J., and Zhu, X. K., "J-A2 Characterization of Crack-tip Fields: Extent of J-A2 Dominance and Size Requirements," International Journal of Fracture, Vol. 89, 1998, pp. 285-307.
48. Chao, Y. J., and Zhu, X. K., "Constraint-Modified J-R Curves and its [their] Application to Ductile Crack Growth," International Journal of Fracture, Vol. 106, 2000, pp 135-160.
49. O'Dowd, N. P., and Shih, C. F., "Family of Crack-Tip Fields Characterized by a Triaxiality Parameter: Part I-Structure of Fields," Journal of Mechanics and Physics of Solids, Vol. 39, 1991, pp. 989-1015.
50. O'Dowd, N. P., and Shih, C. F., "Family of Crack-Tip Fields Characterized by a Triaxiality Parameter: Part II-Fracture Applications," Journal of the Mechanics and Physics of Solids, Vol. 40, 1992, pp. 939-963.
51. Rice, J. R., "A Path Independent Integral and the Approximate Analysis of Strain Concentrations by Notches and Cracks," Transactions of the American Society of Mechanical Engineers, Vol. 90, Journal of Applied Mechanics, Vol. 35, 1968, pp. 379-386.
52. McClintock, F. A., "The Paris Law for Fatigue Crack Growth in Terms of the Crack Tip Opening Displacement," High Cycle Fatigue of Structural Materials, Symposium Proceedings in Honor of: Professor Paul C. Paris, W. O. Soboyejo and T. S. Srivatsan, Eds., The Minerals, Metals and Materials Society (TMS), Warrendale PA, 1997, pp. 3-24. Note missing "N" in numerator of exponent of first of Eqs. 19.
53. Shih, C. F., and Needleman, A., "Fully Plastic Crack Problems Part 1: Solutions by a Penalty Method," Transactions of the American Society of Mechanical Engineers, Vol. 106, Journal of Applied Mechanics, Vol. 51, 1984, pp. 48-56.
54. Kumar, B, German, M. D. and Shih, C. F., "An Engineering Approach for Elastic-Plastic Fracture Analysis," Report EPRI NP-1931, Electric Power Research Institute, Palo Alto CA, 1981.
55. Parks, D. M., Kumar, B., and Shih, C. F., "Consistency Checks for Power-Law Calibration Functions," Elastic-Plastic Fracture: Second Symposium Vol. I-Inelastic Crack Analysis, ASTM STP 803, C. F. Shih and J. P. Gudas, Eds., American Society for Testing and Materials, Philadelphia PA, 1984, pp. I-370-I-383.
56. Shih, C. F., and Needleman, A., "Fully Plastic Crack Problems Part 2: Application of Consistency Checks," Transactions of the American Society of Mechanical Engineers, Vol. 106, Journal of Applied Mechanics, Vol. 51, 1984, pp. 57-64.
57. Shih, C. F., and Hutchinson, J. W., "Combined Loading of a Fully Plastic Ligament Ahead of an Edge-Crack," Transactions of the American Society of Mechanical Engineers, Vol. 108, Journal of Applied Mechanics, Vol. 53, 1986, pp. 271-277.
58. Hê, M. Y., and Hutchinson, J. W., "The Penny-Shaped Crack and the Plane Strain Crack in an Infinite Body of Power Law Material," Transactions of the American Society of Mechanical Engineers, Vol. 103, Journal of Applied Mechanics, Vol. 48, 1981, pp. 830-840.
59. Rice, J. R., "Mathematical Analysis in the Mechanics of Fracture," Fracture, Vol. 2, H. Liebowitz, Ed., Academic Press, New York, 1968, pp. 191-311, esp. pp. 210, 213.
60. Hill, R., The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1950, esp. pp. 128-136. Reprinted.
61. Chakrabarty, J., Theory of Plasticity, McGraw-Hill, New York, NY, 1987, esp. pp. 95-99, 407-412, 425-429, 620. Note that in Figure 6.1 the complement of 2φ is labaled as 2φ and the upper right stress point should be σyy.
62. McClintock, F. A. and Argon, A. S., Eds., Mechanical Behavior of Materials, 1999, esp. pp. 360-379. Reprinted with Errata List, Ceramic Book and Literature Service (CBLS), Tel. 740-374-9458, e-ml: cbls@cbls.com, www.cbls.com, from Addison Wesley, Reading, MA, 1966.
63. Bishop, J. F. W., Green, A. P., and Hill, R., "A Note on the Deformable Region in a Rigid Plastic Body," Journal of the Mechanics and Physics of Solids, Vol. 4, 1956, 256-258.
64. McClintock, F. A., Kim, Y. J., and Parks, D. M., "A Criterion for Plane Strain, Fully Plastic, Quasi-Steady Crack Growth," International Journal of Fracture, Vol. 72, 1995, pp. 197-221.
65. McClintock, F. A. and Slocum, A. H., "Predicting Fully Plastic Mode II Crack Growth from an Asymmetric Defect," International Journal of Fracture, Vol 27, 1985, pp. 49-62.
66. Donne, C. D., "The Crack Tip Displacement Vector Approach to Mixed-Mode Fracture," Mixed Mode Crack Behavior, ASTM STP 1359, K. J. Miller and D. L. McDowell, Eds., American Society for Testing and Materials, West Conshohocken PA, 1999, pp. 21-40.
67. McClintock, F. A., Kim, Y. J., and Parks, D. M., "Tests and Analyses for Fully Plastic Fracture Mechanics of Plane Strain Mode I Crack Growth," Fracture Mechanics: 26th Volume, ASTM STP 1256, W. G. Reuter, J. H. Underwood, and J. C. Newman Jr., Eds., American Society for Testing and Materials, Philadelphia PA, 1995, pp. 199-222.
68. McClintock, F. A., Kenney, K. L., Jung, S., Reuter, W. G., and Parks, D. M., "Asymmetric, Fully Plastic Crack Growth Mechanics and Tests for Structures and Piping," Proceedings of Symposium on Development, Validation, and Application of Ineastic Methods for Structural Analysis and Design, PVP-343, R. F. Sammataro and D. J. Ammerman, Eds., American Society of Mechanical Engineers, New York NY, 1996, pp. 153-167.
69. McClintock, F. A., "Slip Line Fracture Mechanics Applied to Filler-Welded T-Joints under Tension or Folding," Koichi Masubuchi: A Welding Research and Engineering Festschrift, rev. ed., R. G. Morris, Ed., M. I. T. Sea Grant Program, Cambridge MA, 2000, pp. 275-313, esp. pp. 283, 288-305.
70. Kardomateas, G. K., and McClintock, F. A., "Tests and Interpretation of Mixed Mode I and II, Fully Plastic Crack Growth from Simulated Weld Defects," International Journal of Fracture, Vol. 35, 1987, pp. 103-124.
71. Shanley, F. R., "The Column Paradox," Journal of Aeronautical Sciences, Vol. 13, 1946, p. 678.
72. Shanley, F. R., "Inelastic Column Theory," Journal of Aeronautical Sciences, Vol. 14, 1946, pp. 261-268.
73. Lee, H., and Parks, D. M., "Line-Spring Finite Element for Fully Plastic Crack Growth-II. Surface-Cracked Plates and Pipes," International Journal of Solids and Structures, Vol. 35, 1998, pp. 5139-5158.
74. Kim, Y. J., "Modeling Fully Plastic, Plane Strain Crack Growth," Ph.D. Thesis, M. I. T. Department of Mechanical Engineering, May 1993, esp. pp. 24-27, pp. 46-47, pp. 52-59.
75. McClintock, F. A. and Clerico, M., "The Transverse Shearing of Single-Grooved Specimens," Journal of the Mechanics and Physics of Solids, Vol. 28, 1980, pp. 1-16.
76. Hundy, B. B., "Plane Plasticity," Metallurgia, Vol. 49, 1954, pp. 109-118.
77. Atmadja, J., "Weld Failures in Oil Tankers Due to Groundings-A Finite Element Approach," Ocean Engineer and M.S. Thesis, M. I. T. Dept. of Ocean Engineering, August, 1995.
78. ADINA R&D Inc., "ADINA-In for ADINA, User's Manual," Report ARD 92-4, "ADINA-Plot User's Manual", Report ARD 92-7, "ADINA Theory and Modeling Guide," Report ARD 92-8, 1992, Watertown MA.
79. Ewing, D. J. F., "Calculations on the Bending of Rigid/Plastic Notched Bars," Journal of the Mechanics and Physics of Solids, Vol. 16, 1968, pp. 81-98.
80. Green, A. P., and Hundy, B. B., "Initial Plastic Yielding in Notched Bend Tests," Journal of the Mechanics and Physics of Solids, Vol. 4, 1956, pp. 128-144.
81. Naagtegaal, J. C., "Computer Process for Prescribing Second-Order Tetrahedral Elements Using Deformation Simulation in the Design Analysis of Structures," U. S. Patent 6 044 210, 2000.
82. Rice, J. R., and Johnson, M. A., "The Role of Large Crack Tip Geometry Changes in Plane Strain Fracture," Inelastic Behavior of Solids, M. F. Kanninen, W. F. Adler, A. R. Rosenfield, and R. I. Jaffee, Eds., McGraw-Hill, New York, NY, 1970, pp. 641-672.
83. Shum, D. K. M., and Merkle, J. G., "Crack Initiation under Generalized Plane-Strain Conditions," Fracture Mechanics: 23rd Symposium, ASTM STP 1189, R. Chona, Ed., American Society for Testing and Materials, Philadelphia PA, 1993, pp. 37-54.
84. Merkle, J. G., "Near-Crack-Tip Transverse Strain Effects Estimated with a Large Strain Hollow Cylinder Analogy," Fracture Mechanics: 23rd Symposium, ASTM STP 1189, R. Chona, Ed., American Society for Testing and Materials, Philadelphia PA, 1993, pp. 95-114.
85. Hill, R., "On the Limits Set by Plastic Yielding to the Intensity of Singularities of Stress," Journal of the Mechanics and Physics of Solids, Vol. 2, 1954, pp. 278-285.
86. Lloyd, W. R., and Reuter, W. G., "Evaluation of Elastic-Plastic Surface Flaw Behavior and Related Parameters Using Surface Displacement Measurements," Fracture Mechanics: Twenty-First Symposium, ASTM STP 1074, J. P. Gudas, J. A. Joyce, and E. M. Hackett, Eds., American Society for Testing and Materials, Phil-adelphia PA, 1990, pp. 322-336.
87. Lloyd, W. R., and Piascik, R. S., "Three-Dimensional Crack Growth Assessment by Microtopographic Examination," Fracture Mechanics: 26th Volume, ASTM STP 1256, W. G. Reuter, J. H. Underwood, and J. C. Newman Jr., Eds., American Society for Testing and Materials, Philadelphia PA, 1995, pp. 303-308.
88. McClintock, F. A. and Wineman, S. J., "A Wedge Test for Quantifying Fully Plastic Fracture," International Journal of Fracture, Vol. 3, 1987, pp. 285-295.
89. Haq, F., McClintock, F. A., Parks, D. M., and Bass, M. K., "Fully-Plastic Back-Bend Tests for Low-Triaxiality Plane Strain Crack Growth," submitted to Engineering Fracture Mechanics, 2002.
90. McClintock, F. A., "Reduced Crack Growth Ductility due to Asymmetric Configurations," International Journal of Fracture, Vol. 42, 1990, pp. 357-370.
91. Miller, K. J., and McDowell, D. L., Eds., Mixed Mode Crack Behavior, ASTM STP 1359, American Society for Testing and Materials, West Conshohocken PA, 1999.
92. Zhu, X. K. and Chao, Y. J., "Constraint Effects on Crack Tip Fields in Elastic-Perfectly Plastic Materials," Journal of the Mechanics and Physics of Solids, Vol. 49, 2001, pp. 363-399.
93. Rothwell, A. B., "Fracture Propagation Control For Gas Pipelines-Past, Present, and Future," Pipeline Technology, Proceedings of the 3rd International Pipeline Technology Conference, Brugge, Vol. I, R. Denys, Ed., Elsevier Science B. V., 2000, pp. 387-405.
94. McClintock, F. A., and Speth, R. L., "Dimple-Cleavage Transitions in Crack Growth: Deterministic in Charpy Tests from Slip Line Fracture Mechanics, and Statistical in Structures," Mechanisms and Mechanics of Fracture: Symposium in the Honor of Prof. J. F. Knott, W.O. Soboyejo, L. L. Lewandowski, and R. O. Ritchie, Eds., The Minerals, Metals & Materials Society, TMS, Warrendale, PA 2002.