Solidification/stabilization of hazardous wastes containing metals and organic contaminants

Journal of Environmental Engineering

Volumn 129, Issue 4, 2003, Pages 366-376

  Yilmaz, Olcay ^a   Ünlü, Kahraman ^a   Cokca, Erdal ^a  

^a MIDDLE EAST TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Hazardous waste; Metals; Organic matter; PCB; Portland cement; Solidification; Stabilization

Indexed keywords

HAZARDOUS MATERIALS; HYDRAULIC CONDUCTIVITY; IMPURITIES; PORTLAND CEMENT; SOILS; SOLIDIFICATION;

ADSORBABLE ORGANIC HALOGENS;

ENVIRONMENTAL ENGINEERING;

HAZARDOUS WASTE; ORGANIC POLLUTANT; SOLIDIFICATION; STABILIZATION; WASTE DISPOSAL;

EID: 0038025772     PISSN: 07339372     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9372(2003)129:4(366)     Document Type: Article

References (46)

1. Albino, V., Cioffi, R., De Vito, B., and Santoro, L. (1996a). "Evaluation of solid waste stabilization processes by means of leaching tests." Environ. Technol., 17(3), 309-315.
2. Albino, V., Cioffi, R., Santoro, L., and Valenti, G. L. (1996b). "Stabilization of residue containing heavy metals by means of matrices generating calcium trisulphoaluminate and silicate hydrates." Waste Manage. Res., 14(1), 29-41.
3. Al-Tabbaa, A., and Prose, S. (1996). "Treatability study of in-situ stabilization/solidification of soil contaminated with methylene blue." Environ. Technol., 17(2), 191-197.
4. ASTM. (1992). "Standard classification of soils for engineering purposes (Unified Soil Classification System), ASTM Standards." ASTM D 2487-92, Philadelphia.
5. ASTM. (1998). "Standard test method for particle size analysis of soils, annual book of ASTM standards." ASTM D 422, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, Pa. 19428-2959.
6. ASTM. (1998). "Standard test method for unconfined compressive strength of cohesive soil, annual book of ASTM standards." ASTM D 2166, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, Pa.
7. ASTM. (1998). "Test method for laboratory compaction characteristics of soils using standard effort, annual book of ASTM standards." ASTM D 698, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, Pa.
8. American Water Works Association-American Public Health Association (AWWA-APHA). (1998). Standard methods for the examination of water and wastewater, 20th Ed., Washington, D.C.
9. Cartledge, F. K., Butler, L. G., Chalasani, D., Eaton, H. C., Frey, F. P., Herrera, E., Tiulebaum, M. E., and Yang, S. (1990), "Immobilization mechanisms in solidification/stabilization of Cd and Pb salts using portland cement fixing agents." Environ. Sci. Technol., 24(6), 867-873.
10. Chang, J., Lin, T., Ko, M., and Liaw, D. (1999). "Stabilization/ solidification of sludges containing heavy metals by using cement and waste pozzolans." J. Environ. Sci. Health, Part A: Toxic/Hazard. Subst. Environ. Eng., 34(5), 1143-1160.
11. Cioffi, R., Maffucci, L., Martone, G., and Santoro, L. (1998). "Feasibility of manufacturing building materials by recycling a waste from ion exchange process." Environ. Technol., 19(11), 1145-1150.
12. Cocke, D. L. (1990). "The binding chemistry and leaching mechanism of hazardous substances in cementitious solidification/stabilization systems." J. Haz. Mat., 24(2/3), 231-253.
13. Conner, J. R., and Hoeffner, S. L. (1998). "A critical review of stabilization/solidification technology." Crit. Rev. Environ. Sci. Technol., 28(4), 397-462.
14. Först, C., Stieglitz, L., Roth, W., and Kuhnmünch, S. (1989). "Application of headspace analysis and AOX-measurement to leachate from hazardous waste landfills." Chemosphere, 18(9/10), 1943-1954.
15. Freeman, H. M. (1988). Standard handbook of hazardous waste treatment and disposal, McGraw-Hill, New York.
16. Ghosh, A., and Subbarao, C. (1998). "Hydraulic conductivity and leachate characteristics of stabilized fly ash." J. Environ. Eng. (Reston, Va.), 124(9), 812-820.
17. Gitipour, S., Bowers, M. T., and Bodocsi, A. (1997). "The use of modified bentonite for removal of aromatic organics from contaminated soil." J. Colloid Interface Sci., 196(2), 191-198.
18. Glasser, F. P. (1997). "Fundamental aspects of cement solidification and stabilization." J. Haz. Mat., 52(2/3), 151-170.
19. Head, K. H. (1981). Manual of soil laboratory testing. Pentech Press, London, Vol. 2, 1017-1027.
20. Hills, C. D., Lange, L. C., Mole, C. F., Schrapel, K., and Poole, A. B. (1996). "The effect of alite content on portland cement solidified waste forms." Environ. Technol., 17(6), 575-585.
21. Hills, C. D., Sollars, C. J., Koe, L. C., and Perry, R. (1995). "A colorimetric study of the effect of organic compounds on the initial behaviour of cement-based solidified wastes." Waste Manage. Res., 13(1), 21-36.
22. Infante, R. N., and Acosta, I. L. (1988). "Comparison of extraction procedures for the determination of heavy metals in airborne particulate matter by inductively coupled plasma-atomic emission spectroscopy." Atomic Spectrosc., 9(6), 191-194.
23. LaGrega, M. D., Buckingham, P. L., and Evans, J. C. (1994). Hazardous waste management, McGraw-Hill, New York.
24. Lange, L., Hills, C., and Poole, A. (1996), "Preliminary investigation into the effects of carbonation on cement-solidified hazardous wastes." Environ. Sci. Technol., 30(1), 25-30.
25. Macias, A., Kindness, A., and Glasser, F. P. (1997). "Impact of carbon dioxide on the immobilization potential of cemented wastes: chromium." Cement Conc. Res., 27(2), 215-225.
26. Parsa, J., Munson-McGee, S. H., and Steiner, R. (1996). "Stabilization/ solidification of hazardous wastes using fly ash." J. Environ. Eng. (Reston, Va.), 122(10), 935-940.
27. Pollard, S. J., Montgomery, D. M., Sollars, C. J., and Perry, R. (1991). "Organic compounds in the cement-based stabilization/solidification of hazardous mixed wastes-mechanisms and process considerations." J. Haz. Mat., 28(3), 313-327.
28. Poon, C. S., Clark, A. I., and Perry, A. (1986). "Permeability study on the cement based solidification process for the disposal of hazardous wastes." Cement Conc. Res., 16(2), 161-172.
29. Porteus, A. (1985). Hazardous waste management handbook, Butterworths, London.
30. Pritts, J. W., Neufeld, R. D., and Cobb, J. T. (1999). "Stabilization of heavy metal containing hazardous wastes with by-products from advanced clean coal technology systems." J. Air Waste Manage. Assoc., 49(10), 1190-1200.
31. Rho, H., Arafat, H. A., Kountz, B., Buchanan, R. C., Pinto, N. G., and Bishop, P. L. (2001). "Decomposition of hazardous organic materials in the solidification/stabilization process using catalytic-activated carbon." Waste Manage., 21(4), 343-356.
32. Roy, A., Eaton, H. C., Cartledge, F. K., and Tittlebaum, M. E. (1992). "Solidification/stabilization of hazardous waste: evidence of physical encapsulation." Environ. Sci. Technol., 26(7), 1349-1353.
33. Sweeney, R. H., Hills, C. D., and Buenfeld, N. R. (1998). "Investigation into the carbonation of stabilised/solidified synthetic waste." Environ. Technol., 19(9), 893-902.
34. Taseli, B. K., and Gokcay, C. F. (1999). "Biological treatment of paper pulping effluents by using a fungal reactor." Water Sci. Technol., 40(11), 93-99.
35. Turkish Republic Official Gazette. (1995). "Ministry of environment hazardous waste control regulation, number 22387."
36. United States Environmental Protection Agency (U.S. EPA). (1989). "International waste technologies/geo-con in-situ solidification/ stabilization." Applications Analysis Rep. No. EPA/540/A5-89/004.
37. U.S. EPA. (1992). "Silicate technology corporations solidification/ stabilization technology for organic and inorganic contaminants in soils." Applications Analysis Rep. No. EPA/540/AR-92/010.
38. U.S. EPA. (1994). EPA Regulations 40 CRF 761, Chap. 1 (7-1-94 Edition), Sec. 761.60/.65/.125, July 1, 1994.
39. U.S. EPA. (1996). Test methods for evaluating solid wastes, physical/ chemical methods, SW-846, 3rd Ed., Office of Solid Waste and Emergency Response, Washington, D.C.
40. U.S. EPA. (1997). "Technology alternatives for the remediation of soils contaminated with As, Cd, Cr, Hg, and Pb." Engineering Bulletin EPA/540/S-97/500, U.S. Office of Research and Development. Washington, D.C.
41. Watts, R. J. (1998). Hazardous wastes, sources, pathways, receptors. Wiley, New York.
42. Webster, M. T., and Loehr, R. C. (1996). "Long term leaching of metals from concrete products." J. Environ. Eng., 122(8), 714-721.
43. Wiebusch, B., Ozaki, M., Watanabe, H., and Seyfried, C. F. (1998). "Assessment of leaching tests on construction material made of incinerator ash (sewage sludge): Investigations in Japan and Germany." Water Sci. Technol., 38(7), 195-205.
44. Wiles, C. C. (1987). "A review of solidification/stabilization technology." J. Haz. Mat., 14(1), 5-21.
45. Yaziz, M. I., Chin, F. L., Tang, S. N., and Bich, N. N. (1999). "Heavy metal leaching of solidified sludge from a glass components industry." J. Environ. Sci. Health, Part A: Toxic/Hazard. Subst. Environ. Eng., 34(4), 853-861.
46. Yousuf, M., Mollah, A., Vempati, R. K., Lin, C., and Cocke, D. L. (1995). "The interfacial chemistry of solidification/stabilization of metals in cement and pozzolanic material systems." Waste Manage., 15(2). 137-148.