Apparent indentation size effect in a CVD aluminide coated Ni-base superalloy

Surface and Coatings Technology

Volumn 163-164, Issue , 2003, Pages 112-117

  Ning, B ^a   Stevenson, M E ^b   Weaver, M L ^a   Bradt, R C ^a  

^a UNIVERSITY OF ALABAMA   (United States)

^b Metals and Materials Engineers LLC   (United States)

Author keywords

Indentation hardness testing; Knoop indenter geometry; Ni base superalloy substrate

Indexed keywords

CHEMICAL VAPOR DEPOSITION; INDENTATION; MICROHARDNESS; SINGLE CRYSTALS; SUBSTRATES; SUPERALLOYS;

SUPERALLOY SUBSTRATES;

PROTECTIVE COATINGS;

ALUMINIDE; CHEMICAL VAPOR DEPOSITION; COATING; NICKEL ALLOY; SUPERALLOY;

EID: 0037472655     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0257-8972(02)00604-7     Document Type: Article

References (51)

1. C. Leyens, U. Schulz, K. Fritscher, M. Bartsch, M. Peters, W.A. Kaysser, Zeitschrift fur Metallkunde 92 (2001) 762-772.
2. M.J. Stiger, N.M. Yanar, M.G. Topping, F.S. Pettit, G.H. Meier, Zeitschrift fur Metallkunde 90 (1999) 1069-1078.
3. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, F.S. Pettit, Prog. Materials Sci. 46 (2001) 505-553.
4. A. Evans, J. Wang, D. Mumm, in: Proceedings of the Thermal Barrier Coating Workshop NASA Lewis Research Center, Cleveland, OH (editor) 1995, pp. 63-77.
5. R.S. Lima, A. Kucuk, C.C. Berndt, Materials Sci. Eng. A 327 (2002) 224-232.
6. R.S. Lima, A. Kucuk, C.C. Berndt, Surf. Coat. Technol. 135 (2001) 166-172.
7. H. Xu, H. Guo, F. Liu, S. Gong, Surf. Coat. Technol. 130 (2000) 133-139.
8. K.A. Khor, Y.W. Gu, Materials Sci. Eng. A 277 (2000) 64-76.
9. W. Hu, H. Guan, X. Sun, S. Li, Surf. Coat. Technol. 105 (1998) 102-108.
10. J.A. Thompson, T.W. Clyne, Acta Materialia 49 (2001) 1565-1575.
11. E. Lugscheider, K. Bobzin, S. Barwulf, A. Etzkorn, Surf. Coat. Technol. 138 (2001) 9-13.
12. J.A. Haynes, Ph.D. Dissertation, The University of Alabama at Birmingham (1997).
13. J.A. Haynes, M.K. Ferber, W.D. Porter, E.D. Rigney, Materials High Temperatures 16 (1999) 49-69.
14. W.D. Nix, H. Gao, J. Mechanics Physics Solids 46 (1998) 411-425.
15. M.V. Swain, R.C. Bradt, in: R.C. Bradt, C.A. Brookes, J.L. Routbert (Eds.), Plastic Deformation of Ceramics, Plenum Publishing Company, New York, NY, 1995, pp. 195-206.
16. R.A. Andrievskii, S.A. Amanulla, E.J. Brookes, G.V. Kalinnikov, A.F. Potafeev, Inorg. Materials 31 (1995) 1456-1457.
17. M. Göken, M. Kempf, Acta Materialia 47 (1999) 1043-1052.
18. A.A. Elmustafa, J.A. Eastman, M.N. Rittner, J.R. Weertman, D.S. Stone, Scripta Materialia 43 (2000) 951-955.
19. M. Göken, M. Kempf, W.D. Nix, Acta Materialia 49 (2001) 903-911.
20. S.Y. Li, H.P. Ng, A.H.W. Ngan, in: S.P. Baker, R.F. Cook, S.G. Corcoran, N.R. Moody (Eds.), Fundamentals of Nanoindentation and Nanotribology II, 649, Materials Research Society, Pittsburgh, PA, 2001, pp. Q8.11.1-Q8.11.6.
21. D.R. Tate, Transactions ASM 35 (1945) 374-375.
22. H. O'Neill, The Hardness of Metals and its Measurement, Sherwood, Cleveland, OH, 1934.
23. C. Hays, E.G. Kendall, Metallurgy 6 (1973) 275-282.
24. N. Gane, J.M. Cox, Philos. Mag. 22 (1970) 881.
25. F.G. Yost, Metallurgical Trans. 14 (1983) 947-952.
26. A. Ghosh, H. Li, Y.H. Han, R.C. Bradt, J. Materials Res. 8 (1993) 1068-1078.
27. B.M. Warnes, D.C. Punola, Surf. Coat. Technol. 94-95 (1997) 1-6.
28. W.Y. Lee, Y. Zhang, I.G. Wright, B.A. Pint, P.K. Liaw, Metallurgical Materials Trans. A 29A (1998) 833-841.
29. H. Li, R.C. Bradt, J. Materials Sci. 31 (1996) 1065-1070.
30. M.E. Stevenson, M. Kaji, R.C. Bradt, J. Eur. Ceram. Soc. 22 (2001) 1137-1148.
31. L. Riester, P.J. Blau, E. Lara-Curzio, K. Breder, Thin Solid Films 377-378 (2000) 635-639.
32. M.E. Stevenson, M.L. Weaver, R.C. Bradt, in: J.H. Schneibel, K.J. Hemker, R.D. Noebe, S. Hanada, G. Sauthoff (Eds.), High-Temperature Ordered Intermetallic Alloys IX, Vol. 646, 646, Materials Research Society, Pittsburgh, PA, 2001, pp. N6.4.1-N6.4.6.
33. M.L. Weaver, M.E. Stevenson, R.C. Bradt, Materials Sci. Eng. A, (2002), in press.
34. M. Atkinson, J. Materials Sci. 33 (1998) 2937-2947.
35. M. Atkinson, Materials Sci. Eng. A197 (1995) 165-169.
36. J.B. Quinn, G.D. Quinn, J. Materials Sci. 32 (1997) 4331-4346.
37. H. Li, R.C. Bradt, Materials Sci. Eng. A 142 (1991) 51-61.
38. W.Y. Lee, G.Y. Kim, in: J.M. Hampikian, N.B. Dahotre (Eds.), Elevated Temperature Coatings: Science and Technology III, The Minerals, Metals and Materials Society, Warrendale, OH, 1999, pp. 149-160.
39. J.D. Cotton, Ph.D. Dissertation, University of Florida (1992).
40. Q. Ma, D.R. Clarke, J. Materials Res. 10 (1995) 853-862.
41. W.J. Poole, M.F. Ashby, N.A. Fleck, Scripta Materialia 34 (1996) 559-564.
42. Y.Y. Lim, M.M. Chaudhri, Philos. Mag. A 79 (1999) 2979-3000.
43. G.H. Frischat, Strength of Inorganic Glass, Kluwer Academic Publishers, Dordrecht, 1986, pp. 135-145.
44. K. Hirao, M. Tomozawa, J. Am. Ceram. Soc. 70 (1987) 497-502.
45. H. Li, R.C. Bradt, J. Non-Crystalline Solids 146 (1991) 197-212.
46. J. Bystrzycki, R.A. Varin, Scripta Metallurgica et Materialia 29 (1993) 605-609.
47. M. Kaji, M.E. Stevenson, R.C. Bradt, J. Am. Ceram. Soc. (2001), in press.
48. H. Shi, M. Atkinson, J. Materials Sci. 25 (1991) 2111-2114.
49. M.L. Weaver, M.E. Stevenson, B. Ning, R.C. Bradt, unpublished research, The University of Alabama, 2002.
50. A.J. Bushby, J.R. Downes, N.B. Jayaweera, P. Kidd, A. Kelly, D.J. Dunstan, in: S.P. Baker, R.F. Cook, S.G. Corcoran, N.R. Moody (Eds.), Fundamentals of Nanoindentation and Nanotribology II, 649, Materials Research Society, Pittsburgh, PA, 2001, pp. Q8.4.1-Q8.4.6.
51. N.I. Tymiak, D.E. Kramer, D.F. Bahr, T.J. Wyrobek, W.W. Gerberich, Acta Materialia 49 (2001) 1021-1034.