An investigation on underwater shock consolidated carbon fiber reinforced Al composites

Journal of Materials Processing Technology

Volumn 134, Issue 3, 2003, Pages 329-337

  Raghukandan, K ^a   Hokamoto, K ^a   Lee, J S ^a   Chiba, A ^a   Pai, B C ^b  

^a KUMAMOTO UNIVERSITY   (Japan)

^b REGIONAL RESEARCH LABORATORY CSIR   (India)

Author keywords

Aluminum composites; Carbon fiber reinforcements; Explosive compaction; Interfacial bonding; Microstructural morphology

Indexed keywords

ALUMINUM; BALL MILLING; CARBON FIBERS; EXPLOSIVES; MICROSTRUCTURE; POWDERS;

EXPLOSIVE COMPACTION;

FIBER REINFORCED METALS;

EID: 0037457272     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0924-0136(02)01117-2     Document Type: Article

References (44)

1. Tham L.M., Gupta M., Cheng L. Effect of limited matrix-reinforcement interfacial reaction on enhancing the mechanical properties of aluminium-silicon carbide composites. Acta Mater. 49:2001;3243.
2. Do I.P.H., Benson D.J. Micromechanical modeling of shock-induced chemical reactions in heterogeneous multi-material powder mixtures. Plasticity. 17:2001;641.
3. 3/C hybrid metal matrix composites. Comp. Struct. 39:1997;309.
4. Wielage B., Dorner A. Corrosion studies on aluminum reinforced with uncoated and coated carbon fibres. Comp. Sci. Technol. 59:1999;1239.
5. Wang Y.-Q., Zhou B.-L. Effect of fiber coating on the fabrication of fiber reinforced metal matrix composites. J. Mater. Process. Technol. 73:1998;78.
6. J.L. Jordon, N.N. Thadhani, Synthesis of Ti-based metal-like ternary ceramic compounds by dynamic densification and reaction synthesis, in: K.P. Stuadhammer, L.E. Murr, M.A. Meyers (Eds.), Fundamental Issues and Applications of Shock-wave and High-strain-rate-phenomena, Elsevier, London, 2001, p. 305.
7. M.H. Rice, R.G. Mcqueen, J.M. Walsh, Compression of solids by strong shock waves, in: F. Sectz, D. Turnball (Eds.), Solid State Physics, No. VI F, Academic Press, New York, 1958, p. 1.
8. Kimura Y. Formation of zinc ferrite by explosive compression. J. Appl. Phys. 2:1963;312.
9. Adadurov G.A., Bresov O.N., Dremin A.N., Lazarev Al. Preservation of inorganic substances compressed by shock waves. Combust. Explos. Shock Waves. 2:1966;84.
10. Suzuki H., Yosida H., Kimura Y. Effect of detonation shock waves on powder materials. Yogyo Kyolaishi. 77:1969;36. (in Japanese).
11. Kawaka A., Soma T., Saito S. Structure determination of boron nitride transformed by shock compression. Jpn. J. Appl. Phys. 13(5):1974;891.
12. 2 and additions on the stability of Wurtzite-type boron nitride at high temperature and pressure. J. Am. Ceram. Soc. 61(5-6):1978;245.
13. Prummer R.A., Ziegler G. Structure and annealing behaviour of explosively compacted aluminium powders. Powder Metall. Int. 9(1):1985;1035.
14. Thadhani N.N. Shock compression processing of powders. Adv. Mater. Manuf. Proc. 3(4):1988;49.
15. Graham R.A., Morosin B., Venturi E.I., Carr M.J. Materials modification and synthesis under high pressure shock compression. Ann. Rev. Mater. Sci. 16:1986;315.
16. Glade S.C., Thadhani N.N. Shock consolidation of mechanically alloyed amorphous Ti-Si powders. Metal Mater. Trans. A. 261:1995;2565.
17. Stuivinga M., Verbeek H.J., Carton E.P. The double explosive layer cylindrical compaction method. J. Mater. Process. Technol. 85:1999;115.
18. Horie Y., Yano K. Discrete element modeling of shock compression of hexagonal boron nitride powder with and without copper addition. J. Mater. Process. Technol. 85:1999;109.
19. He W., Akaishi M., Tanaka T. High pressure synthesis of cubic boron nitride from Si-hBN system. Diam. Relat. Mater. 10:2001;1465.
20. Tomoshige R., Kakoki Y., Imamura K., Chiba A. Effect on addition of titanium diboride to titanium carbide produced by the SHS/shock consolidation method. J. Mater. Process. Technol. 85:1999;105.
21. Hokamoto K., Fujita M., Tanaka S., Kodama T., Ujimoto Y. High temperature shock consolidation of diamond powders using converging underwater shock assembly. Scripta Metall. 39:1998;1383.
22. Hokamoto K., Tanaka S., Fujita M. Optimization of the experimental conditions for high-temperature shock consolidation. Int. J. Impact Eng. 24:2000;631.
23. 3 and its composites. Mater. Sci. 37:2002;4073.
24. Sivakumar K., Solomon Raj P., Balakrishnan Bhat T., Hokamoto K. Studies on shock consolidated 2124 Al-40 vol.% SiCp composites. J. Mater. Process. Technol. 115:2001;396.
25. K.P. Stuadhammer, K.A. Johnson, Controlled powder morphology experiments in megabar 304L stainless steel compaction, in: L.E. Murr, K.P. Stuadhammer, M.A. Meyers (Eds.), Metallurgical Application of Shock-wave and High-strain-rate phenomena, Marcel Dekker, New York, 1986, p. 149.
26. 4. Mater. Sci. 36:2001;2529.
27. Shang S.S., Hokamoto K., Meyers M.A. Hot dynamic consolidation of hard ceramics. Mater. Sci. 27:1992;5470.
28. S. Kimura, A. Chiba, Y. Morizono, Fabrication of titanium/hydroxyapatite functionally graded bio-materials by underwater shock compaction, in: Proceedings of the Fourth International Symposium on Impact Engineering, Kumamoto, Japan, July 16-18, 2001, Elsevier, London, 2001, p. 905.
29. Thandhani N.N. Shock-induced and shock-assisted solid-state chemical reactions in powder mixtures. J. Appl. Phys. 76(4):1994;2129.
30. Tham L.M., Gupta M., Cheng L. Influence of processing parameters during disintegrated melt deposition processing on near net shape synthesis of aluminum based metal matrix composites. Mater. Sci. Technol. 15:1999;1139.
31. M.A. Meyers, N.N. Thadhani, L.H. Yu, Explosive shock wave consolidation of metal and ceramic powders, in: L.E. Murr (Ed.), Shock Waves for Industrial Applications, Noyes, New Jersey, 1988, p. 299.
32. Sivakumar K., Hokamoto K. Microstructural characteristics of 2124 Al-40 vol.% SiCp metal matrix composites produced by room temperature shock consolidation and hot shock consolidation. Mater. Sci. 35:2000;5823.
33. S.S. Batsanov, Shock induced chemical reactions in metal-silicon systems, in: L.E. Murr, K.P. Stuadhammer, M.A. Meyers (Eds.), Metallurgical and Materials Applications of Shock-wave and High-strain-rates Pheonomena, Elsevier, Netherlands, 1995, p. 704.
34. V.F. Nesterenko, Dynamic loading of porous materials, in: L.E. Murr, K.P. Stuadhammer, M.A. Meyers (Eds.), Metallurgical and Materials Applications of Shock-wave and High-strain-rates Phenomena, Elsevier, Netherlands, 1995, p. 3.
35. V.D. Linse, The particulate nature of dynamic compaction, in: L.E. Murr, K.P. Stuadhammer, M.A. Meyers (Eds.), Metallurgical Application of Shock-wave and High-strain-rate Phenomena, Marcel Dekker, New York, 1986, p. 29.
36. Mcgreary R.K. Mechanical packing of spherical particles. J. Am. Ceram. Soc. 44(10):1961;513.
37. Morris D.G. Bonding process during the dynamic compaction of powders. Mater. Sci. Eng. 57:1983;187.
38. Raybould D. Properties of stainless steel compacted dynamically to produce cold interparticle welding. Mater. Sci. 16:1981;589.
39. Schwarz R.B., Kasiraj P., Vreeland T. Jr., Ahrens T.J. A theory for the shock-wave consolidation of powders. Acta Metall. 32:1984;1243.
40. K. Hokamoto, M. Fujita, A. Chiba, S. Itoh, S. Tanaka, M. Hirose, T. Kugimoto, R. Tomoshige, Hot shock consolidation of difficult-to-consolidate powders using a converging underwater shock wave, in: L.E. Murr, K.P. Stuadhammer, M.A. Meyers (Eds.), Metallurgical and Materials Applications of Shock-wave and High-strain-rates Phenomena, Elsevier, Netherlands, 1995, p. 117.
41. Faber K.T., Evans A.G. Crack deflection process. 1. Theory. Acta Metall. 31(4):1983;565.
42. 4 matrix composites. Ceram. Soc. Bull. 65:1986;351.
43. 4. Am. Ceram. Soc. 72(5):1989;765.
44. T. Blazynski, Explosive compaction of ceramic and polymeric powdered materials, in: L.E. Murr, K.P. Stuadhammer, M.A. Meyers (Eds.), Metallurgical Application of Shock-wave and High-strain-rate Phenomena, Marcel Dekker, New York, 1986, p. 189.