Morphological healing evolution of intragranular penny-shaped microcracks by surface diffusion: Part I. Simulation

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 34, Issue 2, 2003, Pages 277-285

  Huang, P Z ^a   Li, Z H ^b   Sun, J ^a   Gao, H ^c  

^a XI'AN JIAOTONG UNIVERSITY   (China)

^b SHANGHAI JIAO TONG UNIVERSITY   (China)

^c MAX PLANCK INSTITUTE FOR INTELLIGENT SYSTEMS   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ASPECT RATIO; COMPUTER SIMULATION; DIFFUSION IN SOLIDS; FINITE ELEMENT METHOD; MORPHOLOGY; SURFACES; THICKNESS MEASUREMENT;

INTRAGRANULAR PENNY SHAPED MICROCRACKS; MORPHOLOGICAL HEALING EVOLUTION; SPHEROIDIZATION; SURFACE DIFFUSION;

MICROCRACKS;

EID: 0037307464     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-003-0329-0     Document Type: Article

References (60)

1. J. Rödel and A.M. Glaeser: in Sintering of Advanced Ceramics, C. Handwerker, J.E. Blendell, and W.A. Kaysser, eds., The American Ceramic Society, Westerville, OH, 1990, pp. 243-57.
2. A.G. Evans and E.A. Charles: Acta Metall., 1977, vol. 25, pp. 919-27.
3. J. Rödel and A.M. Glaeser: J. Am. Ceram. Soc., 1990, vol. 73 (3), pp. 592-601.
4. J.D. Powers and A.M. Glaeser: J. Am. Ceram. Soc., 1993, vol. 75 (9), pp. 2225-34.
5. B.J. Wanamaker, T.F. Wong, and B. Evans: J. Geophys. Res., 1990, vol. 95 (10), pp. 1563-41.
6. S.H. Hickman and B. Evans: Phys. Chem. Miner., 1987, vol. 15, pp. 91-102.
7. R.N. Singh and J.L. Routbort: J. Am. Ceram. Soc., 1979, vol. 62 (3-4), pp. 128-33.
8. M.D. Drory and A.M. Glaeser: J. Am. Ceram. Soc., 1985, vol. 68 (1), pp. C-14-C-15.
9. J. Svoboda and H. Riedel: Acta Metall. Mater., 1995, vol. 43 (2), pp. 499-506.
10. C. Scott and V.B. Tran: Am. Ceram. Soc. Bull., 1985, vol. 64 (8), pp. 1129-31.
11. J. Rödel and A.M. Glaeser: in Interfacial Structures Properties and Design, M.H. Yoo, W.A.T. Clark, and C.L. Braint, eds., Materials Research Society, Pittsburgh, PA, 1988, pp. 485-90.
12. Z. Suo and W. Wang: J. Appl. Phys., 1994, vol. 76 (6), pp. 3410-21.
13. W.C. Carter and A.M. Glaeser: Acta Metall., 1987, vol. 35 (1), pp. 237-45.
14. P.Z. Huang, Z.H. Li, and J. Sun: Model. Simul. Mater. Sci. Eng., 2001, vol. 9 (3), pp. 193-206.
15. P.Z. Huang, Z.H. Li, and J. Sun: Metall. Mater. Trans. A, 2002, vol. 33 (4), pp. 1117-24.
16. F.A. Nichols: J. Mater. Sci., 1976, vol. 11, pp. 1077-82.
17. G.M. Pharr and W.D. Nix: Acta Metall., 1979, vol. 27, pp. 1615-31.
18. Y.H. Yu and Z. Suo: J. Mech. Phys. Solids, 1999, vol. 47 (5), pp. 1131-55.
19. D.J. Srolovitz and S.A. Safran: J. Appl. Phys., 1986, vol. 60 (1), pp. 247-54.
20. R.M. Cannon and W.C. Carter: J. Am. Ceram. Soc., 1989, vol. 72 (8), pp. 1550-55.
21. F. Parhami, R.M. Mcmeeking, A.C.F. Cocks, and Z. Suo: Mech. Mater., 1999, vol. 31 (1), pp. 43-61.
22. B.D. Coleman, R.S. Falk, and M. Moakher: Phys. D, 1995, vol. 89, pp. 123-35.
23. B.D. Coleman, R.S. Falk, and M. Moakher: SIAM J. Sci. Comp., 1995, vol. 17, pp. 1434-48.
24. B.N. Kim and T. Kishi: Acta Mater., 1999, vol. 47 (7), pp. 2293-301.
25. F.A. Nichols and W.W. Mullins: Trans. TMS-AIME, 1965, vol. 233, pp. 1840-47.
26. J.D. Powers and A.M. Glaeser: J. Am. Ceram. Soc., 1992, vol. 75 (9), pp. 2547-58.
27. L.S. David and B. Evans: J. Geophys. Res., 1984, vol. 89, pp. 4125-35.
28. L.T. Yong and K.R. Wayne: Metall. Trans. A, 1987, vol. 18A, pp. 1403-14.
29. Q. Ma: Scripta Mater., 1997, vol. 36, pp. 77-82.
30. J.-H. Choy, S.A. Hackney, and J.K. Lee: J. Appl. Phys., 1995, vol. 77 (11), pp. 5647-54.
31. F.A. Nichols: Acta Metall., 1968, vol. 16, pp. 103-13.
32. J.K. Lee and T.H. Courtney: Metall. Trans. A, 1989, vol. 20A, pp. 1385-94.
33. D. Hull and R.E. Rimmer: Phil. Mag., 1959, vol. 4, pp. 673-87.
34. T.J. Chuang and J.R. Rice: Acta Metall., 1973, vol. 21, pp. 1625-28.
35. T.J. Chuang, K.I. Kagawa, J.R. Rice, and L.B. Sills: Acta Metall., 1979, vol. 27, pp. 265-84.
36. L. Martinez and W.D. Nix: Metall. Trans. A, 1981, vol. 13A, pp. 427-37.
37. Y. Takahashi, K. Takahashi, and K. Nishiguchi: Acta Mater., 1991, vol. 39 (12), pp. 3199-216.
38. Y. Takahashi, K. Inoue, and K. Nishiguchi: Acta Mater., 1993, vol. 41 (11), pp. 3077-84.
39. C.H. Hsueh, A.G. Evans, and R.L. Coble: Acta Metall., 1982, vol. 30 (7), pp. 1269-79.
40. W.H. Yang and D.J. Srolovitz: Phys. Rev. Lett., 1993, vol. 71 (10), pp. 1593-96.
41. B. Sun, Z. Suo, and A.G. Evans: J. Appl. Phys. Solids, 1994, vol. 42 (11), pp. 1653-77.
42. W. Yang and Z. Suo: Acta Mech. Sinica, 1996, vol. 12 (2), pp. 144-57.
43. Z. Suo: Adv. Appl. Mech., 1997, vol. 33, p. 193.
44. B. Sun, Z. Suo, and A.C.F. Cocks: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1996, vol. 403, p. 71.
45. H.J. Frost, C.V. Thompson, and D.T. Walton: Acta Metall. Mater., 1992, vol. 40, p. 779.
46. A.C.F. Cocks and S.P.A. Gill: Acta Mater., 1996, vol. 44 (12), pp. 4765-75.
47. B. Sun, Z. Suo, and W. Yang: Acta Mater., 1997, vol. 45 (5), pp. 1907-15.
48. J.M. Huang and W. Yang: Model. Simul. Mater. Sci. Eng., 1999, vol. 7, pp. 87-105.
49. P.Z. Huang, Z.H. Li, and J. Sun: Comp. Mater. Sci., 2001, vol. 20 (1), pp. 66-76.
50. P.Z. Huang, Z.H. Li, and J. Sun: Model. Simul. Mater. Sci. Eng., 2000, vol. 8, pp. 843-56.
51. H.L. Zhang, J. Sun, and H. Gao: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 287-94.
52. C. Herring: The Physics of Powder Metallurgy, W.E. Kingston, ed., McGraw-Hill, New York, 1951, p. 143.
53. B. Sun and Z. Suo: Acta Mater., 1997, vol. 45, pp. 4953-62.
54. W.B. Hilling and R.J. Charles: in High Strength Materials, V.F. Zackay, ed., Wiley, New York, NY, pp. 682-705.
55. W.D. Kingery and M. Berg: J. Appl. Phys., 1955, vol. 26 (10), pp. 1205-12.
56. W.W. Mullins: J. Appl. Phys., 1956, vol. 27 (8), pp. 77-83.
57. J. Svoboda and H. Riedel: Acta Metall. Mater., 1992, vol. 40 (11), pp. 2829-40.
58. T.K. Gupta: J. Am. Ceram. Soc., 1978, 61 (5-6), pp. 191-95.
59. C.F. Yen and R.L. Coble: J. Am. Ceram. Soc., 1972, vol. 55 (10), pp. 507-09.
60. B. Sun, Z. Suo, and A.C.F. Cocks: J. Mech. Phys. Solids, 1996, vol. 44(4), pp. 559-81.