Development and applications of thermoelastic stress analysis

Journal of Strain Analysis for Engineering Design

Volumn 33, Issue 2, 1998, Pages 93-104

  Dulieu Barton, J M ^a   Stanley, P ^b  

^a UNIVERSITY OF LIVERPOOL   (United Kingdom)

^b UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Adiabatic behaviour; Crack tip stresses; Damage assessment; Deltatherm; SPATE; Thermoelastic stress analysis

Indexed keywords

BRIDGES; COMPOSITE MATERIALS; CRACKS; MECHANICAL TESTING; STRESSES; TEMPERATURE MEASUREMENT; THEORY;

ADIABATIC BEHAVIOR; CRACK TIP STRESSES; DAMAGE ASSESSMENT; DELTATHERM; THERMOELASTIC STRESS ANALYSIS;

STRESS ANALYSIS;

EID: 0032020962     PISSN: 03093247     EISSN: None     Source Type: Journal    
DOI: 10.1243/0309324981512841     Document Type: Article

References (55)

1. Mountain, D. S. and Webber, J. M. B. Stress pattern analysis by thermal emission (SPATE). Proc. Soc. of Photo-Opt. Inst. Engrs, 1978, 164, 189-196.
2. Harwood, N. and Cummings, W. M. Thermoelastic Stress Analysis, 1991 (IOP Publishing Limited (Adam Hilger), Bristol).
3. Lesniak, J. R. and Boyce, B. R. A high-speed differential thermography camera. In Proceedings of SEM Spring Conference on Experimental Mechanics, Baltimore, Maryland, 1994, pp. 491-497.
4. Stanley, P. and Chan, W. K. Quantitative stress analysis by means of the thermoelastic effect. J. Strain Analysis, 1985, 20, 129-138.
5. Stanley, P. and Chan, W. K. The application of thermoelastic stress analysis to composite materials. J. Strain Analysis, 1988, 23, 137-143.
6. Enke, N. F. and Sandor, B. I. Cyclic plasticity analysis by differential infra-red thermography. In Proceedings of VIth International Congress on Experimental Mechanics, Portland, Oregon, 1988, pp. 836-842.
7. Enke, N. F. An enhanced theory for thermographic stress analysis of Isotropic materials. SPIE Vol. 1084, 1989, pp. 84-102.
8. Machin, A. S., Sparrow, J. G. and Stimson, M.-G. Mean stress dependence of the thermoelastic constant. Strain, 1987, 23, 27-29.
9. Wong, A. K., Jones, R. and Sparrow, J. G. Thermoelastic constant or thermoelastic parameter? J. Phys. Chem. Solids, 1987, 48, 749-753.
10. Wong, A. K., Sparrow, J. G. and Dunn, S. A. On the revised theory of the thermoelastic effect. J. Phys. Chem. Solids, 1988, 49, 395-400.
11. Stanley, P. and Garroch, C. Improvements in the prediction and characterisation of the thermoelastic response of glass-fibre reinforced composite products. Int. J. Mech. Sci., 1997, 39, 163-172.
12. Dunn, S. A., Lombardo, D. and Sparrow, J. G. The mean stress effect in metallic alloys and composites. SPIE Vol. 1084, 1989, pp. 129-142.
13. Wong, A. K. A non-adiabatic thermoelastic theory for composite laminates. J. Phys. Chem. Solids, 1991, 51, 483-494.
14. Dulieu-Smith, J. M., Casciaro, E., Garroch, C., Panautus, P. and Stanley, P. Thermoelastic analysis of stress concentrations in thin orthotropic tubes. In Proceedings of SEM Spring Conference on Experimental Mechanics, Grand Rapids, Michigan, 1995, pp. 360-367.
15. Dunn, S. A. Separation of strain components in composite materials from thermoelastic temperature measurements. J. Appl. Mechanics, 1993, 59, 552-558.
16. Dunn, S. A. On the effects of through-thickness thermal conduction on stress measurements by thermoelastic techniques. Expl Mechanics, 1993, 33, 32-36.
17. Lesniak, J. R. Internal stress measurements. In Proceedings of VI International Congress on Experimental Mechanics, Portland, Oregon, 1988, pp. 825-829.
18. McKelvie, J. and MacKenzie, A. K. Signal attenuation due to internal and external factors. In Thermoelastic Stress Analysis (Eds N. Harwood and W. M. Cummings), 1991, pp. 85-104 (IOP Publishing Limited (Adam Hilger), Bristol).
19. Welch, C. S. and Zickel, M. L. Thermal coating characterisation using thermoelasticity. In Review of Progress in Quantitative Nondestructive Evaluation (Eds D. O. Thompson and D. E. Chimenti), Vol. 12, 1993, pp. 1923-1930.
20. Stanley, P. and Chan, W. K. SPATE stress studies of plates and rings under in-plane loading. Expl Mechanics, 1986, 26, 360-370.
21. Lesniak, J. R., Boyce, B. R. and Sandor, B. I. Thermographic stress analysis/NDE via focal-plane-array detectors. NASA Contract Report CR-NASA-19262, 1991.
22. Ryall, T. G. and Wong, A. K. Design of a focal-plane array thermographic system for stress analysis. Expl Mechanics, 1995, 35, 144-147.
23. Wong, A. K. and Ryall, T. G. Performance of the FAST system for stress analysis. Expl Mechanics, 1995, 35, 148-152.
24. Everett, G. M., Owens, R. H. and Barker, A. J. Developments in the application of the thermoelastic technique to structural mechanics. In Proceedings of 9th International Conference on Experimental Mechanics, Copenhagen, Denmark, 1990, pp. 774-780.
25. Welch, C. S., Cramer, K. E. and Dawicke, D. S. Thermographic inspection of fatigue cracks in riveted plates. In Proceedings of SEM Spring Conference on Experimental Mechanics, Milwaukee, Wisconsin, 1991, pp. 239-243.
26. Haldorsen, L. M. Thermoelastic stress analysis system developed for industrial applications. In Proceedings of SEM Spring Conference on Experimental Mechanics, Seattle, Washington, 1997, pp. 128-129.
27. Beghi, M. G. Thermal analysis of deformation mechanisms using a contacting technique. In Thermoelastic Stress Analysis (Eds N. Harwood and W. M. Cummings), 1991, pp. 35-70 (IOP Publishing Limited (Adam Hilger), Bristol).
28. Dulieu-Smith, J. M. Alternative calibration techniques for quantitative thermoelastic stress analysis. Strain, 1995, 31, 9-16.
29. Dulieu-Smith, J. M., Shenoi, R. A., Read, P. J. C. L., Quinn, S. and Moy, S. S. J. Thermoelastic stress analysis of a GRP tee-joint. J. Appl. Composite Mater., 1997, 4, 283-303.
30. Stanley, P. and Dulieu-Smith, J. M. Devices for the experimental determination of individual stresses from thermoelastic data. J. Strain Analysis, 1996, 31, 53-63.
31. Ryall, T. G. and Wong, A. K. Determining stress components from thermoelastic data - a theoretical study. Mechanics of Mater., 1988, 7, 205-214.
32. Huang, Y. M., Abdelmohsen, H. H. and Rowlands, R. E. Determination of individual stresses thermoelastically. Expl Mechanics, 1990, 30, 88-94.
33. Huang, Y. M. and Rowlands, R. E. Quantitative stress analysis based on the measured trace of the stress tensor. J. Strain Analysis, 1991, 26, 55-63.
34. Feng, Z., Zhang, D., Rowlands, R. E. and Sandor, B. I. Thermoelastic determination of individual stress components in loaded composites. Expl Mechanics, 1992, 32, 89-95.
35. Barone, S. and Patterson, E. A. Full-field separation of principal stresses by combined thermo- and photo-elasticity. Expl Mechanics, 1996, 36, 318-324.
36. Wong, A. K., Dunn, S. A. and Sparrow, J. G. Residual stress measurement by means of the thermoelastic effect. Nature. 1988, 332, 613-615.
37. Rajic, N., Wong, A. K. and Lam, Y. C. A thermomechanical technique for measuring residual stress. Expl Techniques, 1996, 20, 25-27.
38. Lesniak, J. and Bartel, B. An elevated-temperature TSA furnace design. Expl Techniques, 1996, 20, 10-13.
39. Harwood, N. and Cummings, W. M. The theoretical basis of the use of random excitation signals for thermoelastic stress analysis. In Proceedings of 2nd International Conference on Stress Analysis by Thermoelastic Techniques, SPIE Vol. 731, London, 1987, pp. 32-43.
40. Harwood, N. and Cummings, W. M. Calibration of thermoelastic stress analysis technique under sinusoidal and random loading conditions. Strain, 1989, 24, 101-108.
41. Miles, J. P. and Sandor, B. I. Thermoelastic stress analysis of structures under random loading. In Proceedings of SEM Spring Conference on Experimental Mechanics, Dearborn, Michigan, 1993, pp. 605-609.
42. Stanley, P. and Chan, W. K. A novel study of the stress distribution in a thin freely-formed pressure vessel end. In Proceedings of 6th International Conference on Pressure Vessel Technology, Beijing, 1988, pp. 485-500.
43. Bream, R. G., Gasper, B. C., Lloyd, B. E. and Page, S. W. I. The SPATE 8000 thermoelastic camera for dynamic stress measurement on nuclear plant components. In Proceedings of 2nd International Conference on Stress Analysis by Thermoelastic Techniques, SPIE Vol. 731, London, 1987, pp. 132-148.
44. Boyce, B. R., Zuraski, P. D. and Miles, J. Thermoelastic stress measurement on a bridge loaded by traffic. In Proceedings of SEM Spring Conference on Experimental Mechanics, Dearborn, Michigan, 1993, pp. 749-758.
45. Schley, C., Smith, G. F. and Calvert, G. C. Validation of rapid prototyping materials for rapid experimental stress analysis. Presented at 8th Solid Freeform Fabrication Symposium, Austin, Texas, 1997.
46. Stanley, P. and Chan, W. K. The determination of stress intensity factors and crack-tip velocities from thermoelastic infra-red emissions. In Proceedings of International Conference on Fatigue of Engineering Materials and Structures, Sheffield, 1986, pp. 105-114.
47. II specimen. In Proceedings of 2nd International Conference on Stress Analysis by Thermoelastic Techniques, SPIE Vol. 731, London, 1987, pp. 102-109.
48. Stanley, P. and Dulieu-Smith, J. M. Progress in the thermoelastic evaluation of mixed-mode stress intensity factors. In Proceedings of SEM Spring Conference on Experimental Mechanics, Dearborn, Michigan, 1993, pp. 617-629.
49. Stanley, P. and Dulieu-Smith, J. M. The determination of crack-tip parameters from thermoelastic data. Expl Techniques, 1996, 20, 21-23.
50. Tomlinson, R. A., Nurse, A. D. and Patterson, E. A. On determining stress intensity factors for mixed mode cracks from thermoelastic data. Fatigue and Fracture of Engng Mater. Structs, 1997, 20, 217-226.
51. Zhang, P. and Sandor, B. I. Thermographic analysis of stress concentrations in a composite. Expl Mechanics, 1989, 29, 121-125.
52. Jones, R., Heller, M., Lombardo, P., Dunn, S., Paul, J. and Saunders, D. Thermoelastic assessment of damage growth in composites. Composite Structs, 1989, 12, 291-314.
53. Zhang, D. and Sandor, B. I. A thermoelastic theory for damage in anisotropic materials. Fatigue and Fracture of Engng Mater. Structs, 1990, 13, 497-509.
54. Purcell, T. E. Damage assessment in MMC composites using thermoelastic techniques. In Proceedings of SEM Spring Conference on Experimental Mechanics, Las Vegas, Nevada, 1992, pp. 1550-1557.
55. Dulieu-Smith, J. M., Quinn, S. and Minervini, D. Thermoelastic analysis of damage in woven glass/polyester panels. In Proceedings of SEM Spring Conference on Experimental Mechanics, Seattle, Washington, 1997, pp. 359-360.