Creep of metal matrix composites reinforced by combining nano-sized dispersoids with micro-sized ceramic particulates or whiskers (review)

International Journal of Materials and Product Technology

Volumn 18, Issue 1-3, 2003, Pages 215-254

  Peng, L M ^a   Zhu, S J ^b  

^a JAPAN FINE CERAMICS CENTER   (Japan)

^b INSTITUTE OF INDUSTRIAL SCIENCE   (Japan)

Author keywords

Creep; Dispersion strengthening; Load transfer; Metal matrix composite; Threshold stress

Indexed keywords

CERAMIC MATERIALS; CREEP; CRYSTAL WHISKERS; DISPERSIONS; ELASTIC MODULI; HIGH TEMPERATURE EFFECTS; NANOSTRUCTURED MATERIALS; PARTICLES (PARTICULATE MATTER); REINFORCEMENT; STRAIN; STRESSES;

MICROSIZED CERAMIC PARTICULATES; NANOSIZED DISPERSOIDS; THRESHOLD STRESS;

METALLIC MATRIX COMPOSITES;

EID: 0037240858     PISSN: 02681900     EISSN: None     Source Type: Journal    
DOI: 10.1504/ijmpt.2003.003593     Document Type: Article

References (107)

1. Zhu, S. J., Lu, Y. X., Wang, Z. G. and Bi, J. (1992) 'Creep behavior of TiC-particulate-reinforced Ti alloy composite', Mater. Lett., 13(4-5), 199-203.
2. m', J. Mater. Sci. Lett., 11(10), 630-632.
3. Zhu, S. J., Lu, Y. X., Wang, Z. G. and Bi, J. (1993) Metal Matrix Composites. Miravete, A. (Ed.), London: woodhead, pp. 549-556.
4. Ranganath S. and Mishra, R. S. (1996) 'Steady-state creep behavior of particulate-reinforced titanium matrix composites', Acta Mater., 44(3), 927-935.
5. Tsang, H. T., Chao, C. G. and Ma, C. Y. (1997) 'Effects of volume fraction of reinforcement on tensile and creep properties of in-situ TiB/Ti MMC', Scripta Mater., 37(9), 1359-1365.
6. Ranganath, S. (1997) 'A review on particulate-reinforced titanium matrix composites', J. Mater. Sci., 32(1), 1-16.
7. Zhu, S. J., Mukherji, D., Chen, W., Lu, Y. X., Wang, Z. G. and Wahi, R. P. (1998) 'Steady-state creep behavior of TiC particulate reinforced Ti-6Al-4V composite', Mater. Sci. Eng., A256, 301-307.
8. Zhu, J. H., Liaw, P. K., Corum, J. M. and Mccoy, H. E. (1999) 'High-temperature mechanical behavior of Ti-6Al-4V alloy and TiCp/Ti-6Al-4V composite', Metall. Mater. Trans., 30A(7), 1569-1578.
9. Nieh, T. G. (1984) 'Creep rupture of a silicon carbide reinforced aluminium composite', Metall. Trans., 15A(1), 139-146.
10. Nardone, V. C. and Strife, J. R. (1987) 'Analysis of the creep behavior of silicon carbide whisker reinforced 2124 Al (T4)', Metall. Trans., 18A(1), 109-114.
11. Morimoto, T., Yamaoka, T., Lilholt, H. and Taya, M. (1988) 'Second stage creep of SiC whisker/6061 aluminium composite at 573 K', J. Eng. Mater. Tech., 110(1), 70-76.
12. Nieh, T. G., Xia, K. and Langdon, T. G. (1988) 'Mechanical properties of discontinuous SiC reinforced aluminium composite at elevated temperatures', J. Eng. Mater. Tech., 110(1), 77-82.
13. Mishra, R. S. and Pandey, A. B. (1990) 'Some observations on the high-temperature creep behavior of 6061 Al-SiC composites', Metall. Trans., 21A(8), 2089-2090.
14. Pandey, A. B., Mishra, R. S. and Mahajan, Y. R. (1990) 'Creep behavior of an aluminium-silicon carbide particulate composite', Scripta Metall., 24(10), 1565-1570.
15. Dragone, T. L. and Nix, W. D. (1990) 'Geometric factors affecting the internal stress distribution and high temperature creep of discontinuous fiber reinforced metals', Acta Metall. Mater., 38(10), 1941-1953.
16. Park, K. T., Lavernia, E. J. and Mohamed, F. A. (1990) 'High temperature creep of silicon carbide reinforced aluminium', Acta Metall. Mater., 38(11), 2149-2159.
17. Mohamed, F. A., Park, K. T. and Lavernia, E. J. (1992) 'Creep behavior of discontinuous SiC-Al composites', Mater. Sci. Eng., 150A, 21-35.
18. Dragone, T. L. and Nix, W. D. (1992) 'Steady state and transient creep properties of an aluminium alloy reinforced with alumina fibers', Acta Metall. Mater., 40(10), 2781-2791.
19. Pandey, A. B., Mishra, R. S. and Mahajan, Y. R. (1992) 'Steady-state creep behavior of silicon carbide particulate reinforced aluminium composites', Acta Metall. Mater., 40(8), 2045-2052.
20. Gonzalez-Doncel, G. and Sherby, O. D. (1993) 'High temperature creep behavior of metal matrix aluminium-SiC composites', Acta Metall. Mater., 41(10), 2797-2805.
21. Krajewski, P. E., Allison, J. E. and Jones, J. W. (1993) 'The influence of matrix microstructure and particulate reinforcement on the creep behavior of 2219 aluminium', Metall. Trans., 24A(10), 2731-2741.
22. Cadek, J., Sustek, V. and Pahutova, M. (1994) 'Is creep in discontinuous metal matrix composites lattice diffusion controlled?' Mater. Sci. Eng., A174, 141-147.
23. Cadek, J., Oikawa, H. and Sustek, V. (1995) 'Threshold creep behavior of discontinuous aluminium and aluminium alloy matrix composites', Mater. Sci. Eng., A190, 9-23.
24. Park, K. T. and Mohamed, F. A. (1995) 'Creep strengthening in a discontinuous SiC-Al composite', Metall. Mater. Trans., 26A(12), 3119-3129.
25. Pandey, A. B., Mishra, R. S. and Mahajan, Y. R. (1996) 'Effect of a solid solution on the steady-state creep behavior of an aluminium matrix composite', Metall. Mater. Trans., 27A(2), 305-316.
26. Li, Y. and Mohamed, F. A. (1997) 'An investigation of creep behavior in a SiC-2124 Al composite', Acta Mater., 45(11), 4775-4785.
27. Li, Y. and Langdon, T. G. (1997) 'Creep behavior of an Al-6061 metal matrix composite reinforced with alumina particulates', Acta Mater., 45(11), 4797-4806.
28. Li, Y. and Langdon, T. G. (1998) 'Creep behavior of a reinforced Al-7075 alloy: implications for the creep processes in metal matrix composites', Acta Mater., 46(4), 1143-1155.
29. Li, Y. and Langdon, T. G. (1998) 'A comparison of the creep properties of an Al-6092 composite and the unrinforced alloy', Metall. Mater. Trans., 29A(10), 2523-2531.
30. Li, Y. and Langdon, T. G. (1999) 'A unified interpretation of threshold stresses in the creep and high strain rate superplasticity of metal matrix composites', Acta Mater., 47(12), 3395-3403.
31. Ma, Z. Y. and Tjong, S. C. (1999) 'The high temperature creep behavior of 2124 aluminium alloys with and without particulate and SiC-whisker reinforcement', Comp. Sci. Tech., 59(5), 737-747.
32. Li, Y. and Langdon, T. G. (1999) 'Fundamental aspects of creep in metal matrix composites', Metall. Mater. Trans., 30A(2), 315-324.
33. Wakashima, K., Moriyama T. and Mori, T. (2000) 'Steady-state creep of a particulate SiC/6061 Al composite', Acta Mater., 48(3), 891-901.
34. Ma, Z. Y. and Tjong, S. C. (2001) 'Creep deformation characteristics of discontinuously reinforced aluminium-matrix composites', Comp. Sci. Tech., 61(5), 787-795.
35. Rösler, J., Valencia, J. J., Levi, C. G., Evanss, A. G. and Mehrabian, R. (1990) 'Intermetallic matrix composites', Mater. Res. Soc. Sym. Proc., 194, 241-248.
36. 2-reinforced near-γ titanium aluminides', Metall. Trans., 22A(2), 447-454.
37. Froes, F. H., Yau, T. L. and Weidinger, H. G. (1996) Materials Science and Technology, Cahn, R. W., Haasen, P. and Kramer, E. J. (Eds), Weinheim, Germany: VCH Verlagsgesellschaft mbH, pp. 405-408.
38. Frost, H. J. and Ashby, M. F. (1982) Deformation-Mechanism Maps, Pergamon Press, p. 44.
39. Malkondaiah, G. and Rao, P. R. (1981) 'Creep of alpha-titanium at low stresses', Acta Metal., 29(6), 1263-1275.
40. Eylon, D., Hall, J. A., Pierce, C. M. and Ruckle, D. L. (1976) 'Microstructure and mechanical properties relationship in the Ti-11 alloy at room and elevated temperatures', Metall. Trans., 7A(7), 1817-1826.
41. Rösler, J. and Arzt, E. (1990) 'A new model-based creep equation for dispersion strengthened materials', Acta Metal. Mater., 38(4), 671-683.
42. 3 system and comparison to models', Acta Mater., 45(11), 4583-4592.
43. Rösler, J. and Bäker, M. (2000). 'A theoretical concept for the design of high-temperature materials by dual-scale particle strengthening', Acta Mater., 48(13), 3553-3567.
44. Peng, L. M., Zhu, S. J., Ma, Z. Y., Bi, J., Chen, H. R. and Wang, F. G. (1998) 'High temperature creep deformation of Al-Fe-V-Si alloy', Mater. Sci. Eng., A259, 25-33.
45. Cadek, J., Kucharová, K. and Zhu, S. J. (2000) 'Creep behaviour of an Al-8.5Fe-1.3V-1.7Si-15SiCp composite at temperatures ranging from 873 to 948 K', Mater. Sci. Eng., A328, 283-290.
46. Ma, Z. Y., Pan, J., Ning, X. G., Li, J. H., Lu, Y. X. and Bi, J. (1994) 'Aluminium borate whisker reinforced Al-8.5Fe-1.3V-1.7Si composite', J. Mater. Sci. Lett., 13(24), 1731-1732.
47. Kim, I. S., Kim, N. J. and Nam, S. W. (1995) 'Temperature dependence of the optimum particle size for the dislocation detachment controlled creep of Al-Fe-V-Si/SiCp composite', Scripta Metall. Mater., 32(11), 1813-1819.
48. Zhu, S. J., Peng, L. M., Ma, Z. Y., Bi, J., Wang, F. G. and Wang Z. G. (1996) 'High temperature creep behavior of SiC whisker-reinforced Al-Fe-V-Si composite', Mater. Sci. Eng., A215, 120-124.
49. Peng, L. M., Zhu, S. J., Ma, Z. Y., Bi, J., Chen, H. R. and Wang, F. G. (1998) 'Examination on compression creep behavior of an Al-Fe-V-Si alloy and SiC whisker reinforced Al-Fe-V-Si composite', J. Mater. Sci., 33(23), 5643-5652.
50. 4 whiskers on the high temperature creep behavior of an Al-Fe-V-Si alloy matrix composite', Comp. Sci. Tech., 59(5), 769-773.
51. 33 whiskers reinforced 8009 Al composite', Mater. Sci. Eng., A265, 63-70.
52. 3 composites', Mater. Sci. Eng., A282, 273-284.
53. Zhou, Q., Zhu, S. J., Ma, Z. Y., Zhao, J. and Bi, J. (1998) 'Creep of SiC particulates reinforced Al-C-O composites', J. Mater. Sci., 33(13), 3433-3436.
54. Cadek, J., Zhu, S. J. and Milicka, K. (1998) 'Creep behavior of ODS aluminium reinforced by silicon carbide particulates-an ODS Al-30SiCp composite', Mater. Sci. Eng., A248, 65-72.
55. Cadek, J., Kucharová, K. and Zhu, S. J. (1999) 'Creep behavior of an oxide dispersion strengthened Al-5Mg alloy reinforced by silicon carbide particulates-an oxide dispersion strengthened Al-5Mg-30SiCp composite', Mater. Sci. Eng., A272, 45-56.
56. Cadek, J., Kucharová, K. and Zhu, S. J. (2000) 'High temperature creep behavior of an Al-8.5Fe-1.3V-1.7Si alloy reinforced with silicon carbide particulates', Mater. Sci. Eng., A283, 172-180.
57. Mitra, S. (1996) 'Elevated temperature deformation behavior of a dispersion-strengthened Al-Fe, V, Si alloy', Metall. Mater. Trans., 27A(12), 3913-3923.
58. Carreño, F. and Ruano, O. A. (1998) 'Separated contribution of particles and matrix on the creep behavior of dispersion strengthened materials', Acta Mater., 46(1), 159-167.
59. Zhu, S. J., Kucharová, K. and Cadek, J. (2000) 'High temperature creep in an Al-8.5Fe-1.3V-1.7Si alloy processed by rapid solidification', Metall. Mater. Trans., 31A(9), 2229-2237.
60. Park, K. T., Lavernia, E. J. and Mohamed, F. A. (1994) 'High temperature deformation of 6061 Al', Acta Metall., 42(3), 667-678.
61. Li, Y., Nutt, S. R. and Mohamed, F. A. (1997) 'An investigation of creep and substructure formation in 2124 Al', Acta Mater., 45(6), 2607-2620.
62. 54 in aluminium', J. Appl. Phys., 33(5), 1671-1673.
63. Bird, J. E., Mukherjee, A. K. and Dorn, J. E. (1969) Quantitative Relations Between Properties and Microstructures, Branbon, D. G. and Rosen, A. (Eds), Jerusalem: Israel University Press, p. 225.
64. Weertman, J. (1957) 'Steady-state creep of crystals', J. Appl. Phys., 28(3), 1185-1189.
65. Mohamed, F. A. and Langdon, T. G. (1974) 'The transition from dislocation climb to viscous glide in creep of solid solution alloys', Acta Metall. Mater., 22(3), 779-788.
66. Weertman, J. (1957) 'Steady-state creep through dislocation climb', J. Appl. Phys., 28(1), 362-364.
67. Sherby, O. D., Klundt, R. H. and Miller, A. K. (1977) 'Flow stress, subgrain size, and subgrain stability at elevated temperature', Metall. Trans., 8A(4), 843-850.
68. Orowan, E. (1954) Dislocations in Metals, Cohen, M. (Ed.), New York: AIME, p. 1954.
69. Kocks, U. F. (1966) 'A statistical theory of flow stress and work-hardening', Phil. Mag., 13(3), 541-566.
70. Shewfelt, R. S. W. and Brown, L. M. (1977) 'High-temperature strength of dispersion-hardened single crystals, II', Theory, Phil. Mag., 35(6), 945-962.
71. Arzt, E. and Ashby, M. F. (1982) 'Threshold stresses in materials containing dispersed particles', Scripta Metall., 16(11), 1285-1290.
72. Arzt, E and Wilkinson, D. S. (1986) 'Threshold stresses for dislocation climb over hard particles: the effect of an attractive interactions', Acta Metall., 34(7), 1893-1898.
73. Arzt, E. and Rösler, J. (1988) 'The kinetics of dislocation climb over hard particles-II effect of an attractive particle-dislocation interactions', Acta Metall., 36(4), 1053-1060.
74. Friedel, J. (1964) Dislocations, Chapt. 16, Oxford.
75. Cadek, J., Kucharova, K. and Zhu, S. J. (2001) 'Threshold creep behavior of an Al-8.5Fe-1.3V-1.7Si alloy reinforced with silicon carbide particulates', Kovove Mater., 39(1), 77-84.
76. Cadek, J., Kucharova, K. and Sustek, V. (1999) 'A PM 2124 Al-20SiCp composite: disappearance of true threshold creep behavior at high testing temperatures', Scripta Mater., 40(11), 1269-1275.
77. Mishra, R. S., Nandy, T. K. and Greenwood, G. W. (1994) 'The threshold stress for creep controlled by dislocation-particle interactions', Phil. Mag., A69(5), 1097-1109.
78. Kloc, L., Spigarelli, S., Cerri, E., Evangelista, E. and Langdon, T. G. (1996) 'An evaluation of the creep properties of two Al-Si alloys produced by rapid solidification processing', Metall. Mater. Trans., 27A(12), 3871-3879.
79. Yavari, P., Mohamed, F. A. and Langdon, T. G. (1981) 'Creep and substructure formation in an Al-5%Mg solid solution alloy', Acta Metall., 29(7), 1495-1507.
80. Yavari, P. and Langdon, T. G. (1982) 'An examination of the breakdown in creep by viscous glide in solid solution alloys at high stress levels', Acta Metall., 30(12), 2181-2196.
81. Kelly, A. and Street, K. N. (1972) 'Creep of discontinuous fiber composites II, theory for the steady-state', Proc. R. Soc. Lon., A328(2), 283-293.
82. Fu, S. Y. and Lauke, B. (1996) 'Effect of fiber length and fiber orientation distribution on the tensile strength of short-fiber-reinforced polymers', Comp. Sci. Tech., 56(8), 1179-1190.
83. Ulrych, F., Sova, M., Vokrouhlecky, J. and Turcic, B. (1993) 'Empirical relations of the mechanical properties of polyamide 6 reinforced with short glass fibers', Polym. Comp., 14(2), 229-237.
84. Chiang, C. R. (1994) 'A statistical theory of the tensile strength of short fiber-reinforced composites', Comp. Sci. Tech., 50(3), 479-482.
85. Fu, S. Y. and Lauke, B. (1998) 'The elastic modulus of misaligned short-fiber-reinforced polymers', Comp. Sci. Tech., 58(3), 389-400.
86. Zhu, S. J., Xu, F. M. and Wang, F. G. (2000) 'Fabrication and fatigue crack growth behaviour of SiC/Al graded metal matrix composite', Proc. Ann. Conf. Metals, Japan Institute of Metals, Tokyo, p. 480.
87. Koizumi, M. (1992) Proc. 16th Ann. Conf. Composites and Adv. Ceram. Mater., The American Ceramic Society, Westerville, OH, pp. 333-347.
88. Ho, S. and Lavernia, E. J. (1996) 'Thermal residual stresses in functionally graded and layered 6061 Al/SiC materials', Metall. Mater. Trans., 27A(10), 3241-3249.
89. Liu, Q. M., Jiao, Y. N., Yang, Y. S. and Hu, Z. Q. (1996) 'Theoretical analysis of the particle gradient distribution in centrifugal field during solidification', Metall. Mater. Trans., 27B(6), 1025-1029.
90. Rajan, T. P. D., Pillai, R. M. and Pai, B. C. (1998) 'Reinforcement coatings and interfaces in aluminium matrix composites (Review)', J. Mater. Sci., 33(14), 3491-3503.
91. Leng, Y. and Courtney, T. C. (1990) 'Fracture behavior of laminated metal-metallic glass composites', Metall. Trans. 21A(8), 2159-2168.
92. Ellis, L. Y. and Lewandowski, J. J. (1991) 'Laminated composites with improved bending ductility and toughness', J. Mater. Sci. Lett., 10(5), 461-463.
93. Lee, S., Wadsworth, J. and Sherby, O. D. (1991) 'Tensile properties of laminated composites based on ultrahigh carbon steel', J. Comp. Mater., 25(5), 842-853.
94. Nardone, V. C., Strife, J. R. and Prewo, K. M. (1991) 'Microstructurally toughened particulate-reinforced aluminium matrix composites', Metall. Trans., 22A(1), 171-182.
95. Zhang, J. and Lewandowski, J. J. (1997) 'Delamination study using four-point bending of bilayers', J. Mater. Sci., 32(15), 3851-3856.
96. Pandey, A. B., Majumdar, B. S. and Miracle, D. B. (2001) 'Laminated particulate-reinforced aluminum composites with improved toughness', Acta Mater., 49, 405-417.
97. 3 Al composites', J. Mater. Res., 15(5), 1131-1144.
98. Chen, C. Y. and Chao, C. G. (2000) 'Effect of particle-size distribution on the properties of high-volume-fraction SiCp-Al-based composites', Metall. Mater. Trans., 31A(9), 2351-2359.
99. Kouzeli, M., Weber, L., San Marchi, C. and Mortensen, A. (2001) 'Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminium', Acta Mater., 49, 497-505.
100. 4/Al composites', Proc. Ann. Conf. Ceram., The Ceramic Society of Japan, Tokyo, p. 5.
101. Ibrahim, A., Mohamed, F. A. and Lavernia, E. J. (1991) 'Particulates reinforced metal matrix composites-a review', J. Mater. Sci., 26(5), 1137-1156.
102. Biswas, D. K., Gatica, J. E. and Tewari, S. N. (1998) 'Dynamic analysis of unidirectional pressure infiltration of porous preforms by pure metals', Metall. Mater. Trans., 29A(1), 377-385.
103. Candan, E., Atkinson, H. V. and Jones, H. (2000) 'Effect of ceramic particle size and applied pressure on time to complete infiltration of liquid aluminium into SiC powder compacts', J. Mater. Sci., 35(21), 4955-4960.
104. 3 and SiC particulates by the pressureless infiltration technique', Metall. Mater. Trans., 29A(12), 3087-3095.
105. Lee, J. C., Kim, G. H., Lee, J. I. and Lee, H. I. (1997) 'Interfacial reactions in the squeeze-cast (SAFFIL + C)/SAE 329 Al composites', Metall. Trans., 28A(5), 1251-1259.
106. Sohn, K. S., Euh, K., Lee, S. and Park, I. (1998) 'Mechanical properties and fracture behavior of squeeze-cast Mg matrix composites', Metall. Trans., 29A(10), 2543-2554.
107. Neite, G., Kubota, K., Higashi, K. and Hehmann, F. (1996) Materials Science and Technology, Cahn, R. W., Haasen, P. and Kramer, E. J. (Eds), Weinheim, Germany, Vol. 8, pp. 198-201.