Reinforcement coatings and interfaces in aluminium metal matrix composites

Journal of Materials Science

Volumn 33, Issue 14, 1998, Pages 3491-3503

  Rajan, T P D ^a   Pillai, R M ^a   Pai, B C ^a  

^a REGIONAL RESEARCH LABORATORY CSIR   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; ALUMINUM ALLOYS; CERAMIC COATINGS; CHEMICAL REACTIONS; COATING TECHNIQUES; COMPOSITION; INTERFACES (MATERIALS); REINFORCEMENT; SILICON CARBIDE; WETTING;

IN SITU ALLOYING; IN SITU HYBRIDIZING; METALLIC COATINGS; WETTABILITY;

METALLIC MATRIX COMPOSITES;

EID: 0032108864     PISSN: 00222461     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1004674822751     Document Type: Review

References (136)

1. F. DELANNAY, L. FROYEN and A. DERUYTTERE, J. Mater. Sci. 22 (1987) 1.
2. E. A. FEEST, Composites 25 (1994) 75.
3. J. M. HOWE, Int. Mater. Rev. 38 (1993) 233.
4. Idem, ibid. 38 (1993) 257.
5. A. MORTENSON and I. JIN, ibid. 37 (1992) 105.
6. B. C. PAI, GEETHA RAMANI, R. M. PILLAI and K. G. SATHYANARAYANA, J. Mater. Sci. 30 (1995) 1903.
7. C. Y. YUE and W. L. CHEUNG, ibid. 27 (1992) 3843.
8. R. MITHRA and Y. R. MAHAJAN, Bull. Mater. Sci. 18 (1995) 405.
9. B. C. PAI, R. M. PILLAI and K. G. SATHYANARAYANA, in "Proceedings of the Conference on Advances in Composites", ADCOMP '96, edited by E. S. Dwarakadasa and C. G. Krishnadas Nair (Allied Publishers, New Delhi, India, 1996) p. 201.
10. A. G. METCALFE, in "Metal Matrix composites" (Academic, New York, 1974) p. 369.
11. H. SRINIVASA RAO, B. C. PAI, P. L. VINOD, R. MANOJ and S. S. SREEKUMAR, Pract. Metall 31 (1994) 190.
12. D. J. LLYOD, H. P. LAGACE and A. D. MC LEOD, in "Proceedings of the International Conference on Composite Materials", ICCM-III, edited by H. Ishida (Elsevier Applied Science, London, 1980) p. 359.
13. D. J. LLYOD and I. JIN, Metall. Trans. 19A (1988) 3107.
14. R. WARREN and C. H. ANDERSON, Composites 15 (1984) 101.
15. J. C. LEE, JUNG. III LEE and Ho. In. LEE, Scripta Mater. 35 (1996) 721.
16. L. SALVO, G. L. ESPERANCE, M. SUERY and J. G. LEGOUX, Mater. Sci. Eng. A177 (1994) 173.
17. C. M. GABRYAL and A. D. MC LEOD, Metall. Trans. 23A (1992) 1279.
18. T. ISEKI, T. KAMEDA and T. MURUYAMA, J. Mater. Sci. 19 (1984) 1692.
19. D. J. LEE, M. D. VAUDIN, C. A. HANDWERKER and U. A. KATTNER, in "Proceedings of the Conference of Materials Research Society, Vol. 120 (1988) p. 357.
20. H. J. RACK, in "Proceedings of the Conference of Dispersion Strengthened Aluminium Alloys", edited by Y. M. Kim and W. M. Griffith (TMS, Warrendale, PA, 1988) p. 649.
21. S. R. NUTT, in "Proceedings of the Conference on Interfaces in Metal Matrix Composites", edited by A. K. Dhingra and S. G. Fishman (TMS, Warrandale, PA, 1986) p. 157.
22. S. R. NUTT and R. W. CARPENTER, Mater. Sci. Eng. 75 (1985) 169.
23. C. G. LEVI, G. J. ABBASCHIAN and R. MEHRABIAN, Metal Trans. 9A (1978) 697.
24. T. SRITHARAN, K. XIA, J. HEATHCOCK and J. MIHELICH, in "Proceedings of the Conference on Metal and Ceramic Matrix Composites: Processing, Modelling and Mechanical", edited by R. R. Bhaghat (TMS, Warrendale, PA, 1990) p. 13.
25. K. K. CHAWLA, in "Composite Materials Science and Engineering" (Springer, New York, 1987) p. 83.
26. A. K. KURUVILA, V. V. BHANU PRASAD, K. K. PRASAD and Y. R. MAHAJAN, Bull. Mater. Sci. 12 (1989) 495.
27. F. ZOK, S. JANSHON, A. G. EVANS and V. NARDONE, Matall. Trans. 22A (1991) 2107.
28. P. A. EARVOLINO, M. E. FINE, J. R. WECTERMAN and V. R. PARAMESHWARAN, Scripta Metall. Mater. 26 (1992) 945.
29. S. R. GUNAWARDANA, S. JANSSON and F. A. LECKIE, in "Failure mechanisms in high temperature composites" (ASME, New York, NY) p. 22.
30. ROGER, B. CLOUGH, FRANCIS. S. BIANCANIELLO, HAYDEN. N. G. WADLEY and URSULA. R. KATTNER, Metall. Trans. 21A (1990) 2747.
31. S. M. ARNOLD, V. K. ARYA and M. E. METIS, J. Compos. Mater. 26 (1992) 1287.
32. L. J. GHOSH and B. A. LERCH, in "NASA Tech. Memo., NASA TM-102295", (1989) p.19.
33. R. K. PANDEY and U. T. S. PILLAI, in "Proceedings of the 4th International Conference on Fatigue Crack Growth (Fatigue 90)" edited by H. Kitagawa and T. Tanaka, Vol. 2, (MCEP, Hawaii, USA, 1990) p. 653.
34. U. T. S. PILLAI, Ph.D. Thesis, IIT, Delhi (1986).
35. K. LI, X. D. JIM, B. D. YAN and P. X. LI, Composites 23 (1992) 54.
36. D. P. H. HASSELMAN and K. Y. DONALDSON, J. Am. Ceram. Soc. 75 (1992) 3137.
37. A. L. GEIGER, D. P. H. HASSELMAN and K. Y. DONALDSON, J. Mater. Sci. Lett. 12 (1993) 420.
38. N. EUSTATHOPOULOS, J. C. LOUD, P. DESRE and J. M. HECTER, Mater. Trans. 7A (1976) 279.
39. M. F. AMATEAU, J. Compos. Mater. 10 (1976) 279.
40. I. H. KHAN, Metall. Trans. 7A (1976) 1281.
41. S. ABRAHAM, B. C. PAI, K. G. SATHYANARAYANA and V. K. VAIDYAN, J. Mater. Sci. 27 (1992) 3479.
42. S. ABRAHAM, B. C. PAI, K. G. SATHYANARAYANA and V. K. VAIDYAN, in "Proceedings of the Conference on Interfacial Phenomenon in Composite Material", edited by F. R. Jones (Butterworths, London, 1989) p. 276.
43. P. K. ROHATGI, D. NATH and S. ZIYAM, Z. Metallkde 12 (1991) 783.
44. G. CAROTENUTO, A. GALLO and L. NICOLAIS, Adv. Compos. Lett. 3 (1994) 139.
45. T. SUZUKI, H. UMEHARA, R. HOYASHI and S. WATANABE, J. Mater. Res. 8 (1993) 2492.
46. P. STEFANIK and P. SEBO, J. Mater. Sci. Lett. 12 (1993) 1083.
47. Z. SHI, Mater. Mech. Eng. 16 (1992) 4.
48. Y. GAN, Plat. Surf. Finish 79 (1992) 81.
49. S. ABRAHAM, B. C. PAI, K. G. SATHYANARAYANA and V. K. VAIDYAN, J. Mater. Sci. 25 (1990) 2839.
50. T. F. STEPHENSON and J.A. E. BELL, in "Second Canadian International Composite Conference and Exhibition", edited by W. Wallace and R. Gauvin (Canadian Association for Composites Structures Materials, Quebec, Canada, 1993) p. 359.
51. T. F. STEPHENSON, A. E. M. WARNER, S. WILSON, A. T. ALPS and P. K. ROHATGI, in "Proceedings of Materials Week" joint TMS/ASM Conference, OH, October 1996 (pre-print).
52. R. ASTHANA and P. K. ROHATGI, J. Mater. Sci. Lett. 12 (1993) 442.
53. H. BERCK, G. JACOBI, H. PODLESAK, G. FRISTCHE and G. LEONHARDT, Z. Metallkde 12 (1991) 597.
54. F. PRYZYBORWSKI, G. LEONHARDT, P. SCHULZ, G. PURSCHE and H. RESCH, in "Proceedings of the Second European Conference on Advanced Materials and Process, EUROMAT '91," Vol. 2: Advanced Structural Materials, edited by T. W. Clyne and P. J. Withers (Institute of Materials, London, 1992) p. 156.
55. J. A. E. BELL and G. HANSEN, in "Proceedings of the Conference on Advanced Materials Meeting the Economic Challenge", edited by T. S. Reinhart, M. Rosenow, R. A. Cull and E. Struckholt, Society for Advancement of Materials and Process Engg., California, USA.
56. T. F. STEPHENSON and J. A. E. BELL, in "Proceedings of the Conference in Advancement in Synthesis and Process", edited by F. H. Froes, W. Wallace, R. A. Cull and E. Struckholt, Society for Advancement of Materials and Process Engg., California, USA.
57. J. A. E. BELL and T. F. STEPHENSON, US Pat. 5385 195 (USA) Convention date 16 September 1993.
58. P. G. KARANDIKER and T. W. CHOU, in "Proceedings of the Conference on Fundamental Relationships between Micro structures and Mechanical Properties of MMCs", edited by P. K. Liaw and M. N. Gungor (TMS, Warrendale, PA 1990) p. 59.
59. S. G. WARRIER, C. A. BLUE and R. Y. RIN, J. Mater. Sci. 28 (1993) 760.
60. W. V. BARRERA and C. USLU, ibid. 29 (1994) 4742.
61. K. T. KASHYAP, K. GOVINDARAJULU, M. C. MITTAL and P. V. SHARMA, J. Mater. Sci. Lett. 14 (1995) 1691.
62. S. MUSUTERU, K. KOTSURIRO and S. KO, J. Jpn Inst. Metals 49 (1974) 1094.
63. F. A. BADIA and P. K. ROHATGI, AFS Trans. 77 (1969) 402.
64. F. A. BADIA, MC DONALD and J. R. PEARSON, ibid. 79 (1971) 265.
65. A. M. PATTON, J. Inst. Metals 100 (1972) 197.
66. F. A. BADIA, AFS Trans. 79 (1971) 347.
67. M. K. SURAPPA and P. K. ROHATGI, Met. Technol. 5 (1978) 358.
68. B. C. PAI and P. K. ROHATGI, Mater. Sci. Eng. 21 (1979) 161.
69. Idem, Trans. Indian Inst. Metals 27 (1974) 97.
70. Idem, J. Mater. Sci. 13 (1978) 329.
71. E. LAMOTTE, K. PHILIPS, A. J. PERRY and H. R. KILLIAS, ibid. 1 (1972) 349.
72. B. C. PAI, A. G. KULKARNI and N. BALASUBRAMANIAM, ibid. 14 (1979) 592.
73. S. CIBY, B. C. PAI, K. G. SATHYANARAYANA, V. K. VAIDYAN and P. K. ROHATGI, J. Mater. Eng. Perf. 2 (1993) 353.
74. S. ABRAHAM, PhD Thesis, Kerala University, India (1997).
75. Y. Q. WANG, J. H. ZHANG, Z. M. WANG, B. L. ZHOU, L. J. ZHOU and P. Q. ZHANG Acta. Metall. Sin. 30 (1994) B194.
76. Y. Q. WANG and B. L. ZHOU, Composites 27A (1996) 1339.
77. J. BOUIX, R. FAIVRE, C. VINCENT, H. VINCENT, S. CARDINAL, P. FLEISCHMANN, P. F. GOBIN and P. MERLE, in "Proceedings of the Conference on Advanced Composite Materials: Leading Part for 21st Century", edited by C. Bathias and M. Uemura, (SIRPE, Paris, France, 1991) p. 161.
78. M. RABINOVITCH, M. H. VIDALSETIF, J. C. LAUX, J. L. RAVIART, J. L. GERARD and R. MEVREL, in "Proceedings of the International Conference on Composite Materials - ICCM/9", edited by Antonio Miravete (Woodhead Publishing, Cambridge, UK, 1993) p. 683.
79. S. MOOROKA, J. HAYASAKI, K. KUSAKABE, H. MAEDA and B. K. SEA, Carbon 34 (1992) 179.
80. A. KITHAKARA, S. AKIYAMA and H. VENO, J. Jpn. Inst. 40 (1990) 305.
81. G. J. C. CARPENTER and S. H. J. LO, J. Mater. Sci. 27 (1992) 1827.
82. J. P. CLEMENT, H. J. RACK, K. T. WU and H. G. SPENCER, Mater. Manuf. Process 5 (1990) 17.
83. V. S. KILIN, E. M. CHEREDNIK, L. N. SCHCHEGLOVA and V. C. DERGUNOVA, Powder Metall. 2 (1976) 44.
84. S. A. AMMER, V. C. DERGUNOVA and YU. A. DARYDOV, Polym. Mech. 3 (1976) 536.
85. H. O. PIERSON and E. RANDICH, Thin Solid Films 4 (1978) 119.
86. S. N. PATANKAR, V. GOPINATHAN and P. RAMAKRISHNAN, J. Mater. Sci. Lett. 9 (1990) 912.
87. J. P. ROCHER, J. M. QUENISSET and R. NASLAIN, J. Mater. Sci. 24 (1989) 2697.
88. K. FUJITA, Y. SAWADA and K. HONJO, J. Jpn Soc. Compos. Mater. 17 (1991) 80.
89. O. PEREZ, M. H. VIDAL-SETIF, M. LANCIN and PATRIARCHE, in "Proceedings of the Third European Conference on Advanced Materials and Processing" edited by P. Pichoir and P. Costa, (Les Editions de Physique, France, 1993) p. 1.
90. E. THAN, A. HOFFMANN and G. LEONHARDT, in "Proceedings of the 7th Working Conference on Applied Surface Analysis", (Fresencies J anal. Chem., 1993) p. 37.
91. B. VEPRIK, M. KURILEV, E. SHTESSEL and V. MUKAZHANOV, in "Proceedings of the Conference of MICC-90", edited by I. N. Fridlyander and V. I. Kostikov (Elsevier Science, Essex, UK, 1991) p. 978.
92. S. J. CHU and H. W. WANG, Mater. Sci. Prog. (Chinese) 1 (1993) 268.
93. J. K. YU, H. L. LI and B. C. SHANG, J. Mater. Sci. 29 (1994) 2641.
94. H. LI, H. WANG, B. ZHANG, Z. MAO and J. YU, in "Proceedings of the First Pacific Rim International Conference on Advanced Materials and Processing, (PRICM-1)" edited by C. Shi, H. Li and A. Scott (TMS, Warrendale, PA, 1993) p. 591.
95. P. K. ROHATGI, S. RAY, R. ASTHANA and C. NARENDRANATH, Mater. Sci. Eng. A 162 (1993) 163.
96. M. KOBASHI and T. CHOH, J. Mater. Sci. 28 (1993) 684.
97. P. K. ROHATGI, R. ASTHANA and S. DAS, Int. Metall. Rev. 31 (1986) 115.
98. A. MORTENSON and I. JIM, ibid. 37 (1992) 105.
99. A. MORTENSON, in "Proceedings of the Conference on Mechanical and Physical Behaviour of Metallic and Ceramic Composites", edited by S. I. Anderson, H. Lilhot and O. B. Pederson (Risø National Laboratory, Risø, Denmark, 1981) p. 41.
100. O. SHIRAISHI, K. YOSHIDA K. AKAMATTU and Y. TANABE, in "Proceedings of the 76th Conference of Japan Institute of Light Metals" (Japan Institute of Light Metals, Tokyo, 1989) p. 185.
101. R. ASTHANA and P. K. ROHATGI, Compos. Manf. 3 (1992) 119.
102. K. W. MOON and D. J. LEE, J. Korean Inst. Met. Mater. 30 (1992) 432.
103. W. S. CHANG, S. Y. CHAN and S. J. LIN, Plat. Surf. Finish. 83 (1996) 68.
104. M. CHAKRABORTY, in "Surface and Interfaces in Cast Al/SiCp MMC", Second Annual Project Report submitted to CSIR-India, (1997) p. 12.
105. A. BARDAL, J. Mater. Sci. 28 (1993) 2699.
106. L. N. THANH and M. SUERY, Scripta. Metall. Mater. 25 (1991) 2781.
107. J. NARCISO, A. ALONSO, G. GARCIA, A. PAMIES and E. LOWIS, in "Proceedings of the Conference on MMC", Vol. 1, edited by Antonio Miravete (Woodhead Publishing, Cambridge, UK, 1993) p. 779.
108. W. M. ZHONG, G. L. ESPERENCE and M. SUREY, Metall. Mater. Trans. 26A (1995) 2637.
109. Y. Q. TU, G. Y. LU P. X. LI and Z. M. WANG, Chin. J. Mater. Res. 8 (1994) 570.
110. L. V. RAMANATHAN and P. C. R. NUNES, in "Proceedings of the Conference on Control of Interfaces in Metal and Ceramic Composites" edited by R. Y. Lin and S. G. Fishman (TMS, Warrendale, PA 1994) p. 333.
111. A. BARDAL, Gov. Res. Annouc. Index (1991) p. 30.
112. H. RIBES, R. DE. SILVA, M. SUERY and T. BRETHEAU, Mater. Sci. Technol. 6 (1990) 621.
113. M. SUREY, G. L. ESPERENCE, B. D. HONG, L. NGUYEN THANTH and F. BORDEAUX, J. Mater. Eng. Perform. 2 (1993) 365.
114. M. SREEMONY, T. B. GHOSH, B. C. PAI and M. CHAKRABORTY, in "Proceedings of the National Conference on Science and Technology of Surfaces and Interfaces", edited by C. L. Roy, Indian Institute of Technology, Kharagpur, India, December, 1996, p. 96.
115. Y. R. MAHAJAN, Adv. Compos. Newsletter 6 (1997) p. 13.
116. E. NYBERG, in "Proceedings of the Conference on Processing and Modelling of Advanced Materials", edited by F. H. Froes and T. Khan, Trans Tech Publications Ltd., Paris, France, 1991 (pre-print) p. 349.
117. Y. H. TENG and J. D. BOYD, in "Proceedings of the Conference on Advancement in Synthesis and Processes", edited by F. H. Froes, W. Wallace, R. A. Cull and E. Struckholt, Society for Advancement of Materials and Process Engg., California, USA, 1992, p. M546.
118. Y. XIAO, B. J. TAN, L. SUIB and G. GALASSO, in "Proceedings of the Conference on Synthesis and Processing of Ceramics", edited by W. E. Rhine, T. M. Shaw, R. J. Gottschall and Y. Chen (Materials Research Society, PA, USA, 1992) p. 231.
119. L. P. LEFEBVRE, G. L. ESPERENCE and M. SUERY, J. Mater. Sci. 32 (1997) 3987.
120. B. P. KRISHNAN, M. K. SURAPPA and P. K. ROHATGI, ibid. 16 (1981) 1209.
121. G. GONZALEZ, G. L. ESPERENCE, L. SALVO and M. SUERY, Scripta Metall. Mater. 33 (1995) 1969.
122. K. T. HIM and C. H. LEE, in "Proceedings of the Conference on MMC", ICCM/9, Vol. 1, edited by Antonio Miravete (Woodhead Publishing, Cambridge, UK, 1993) p. 163.
123. K. T. HIM, C. H. LEE and M. V. KO, J. Korean Inst. Metall. Mater. 31 (1993) 1487.
124. K. L. CHOY, Scripta Metall. Mater. 32 (1995) 219.
125. Y. H. TENG and J. D. BOYD, in "Proceedings of the Conference on Advances in Cast Reinforced Metal Composites", Chicago, 1988, p. 139.
126. A. MUNITZ, M. METZGER and R. MEHRABIAN, Metall. Trans. 10A (1979) 1491.
127. B. S. KANG, B. S. CHUN, C. W. WON and H. Y. SOHN, J. Mater. Sci. 30 (1995) 3883.
128. K. H. BAIK, G. C. LEE and S. AHN, in "Proceedings of the Conference on Light Materials for Transportation System", edited by N. J. Kim (Pohang University of Science and Technology, Pohang, Korea, 1993) p. 773.
129. K. H. BAIK, S. AHN, E. S. LEE and G. C. LEE, J. Korean Inst. Metall. Mater. 34 (1996) 85.
130. R. RAJ, A. PEARCE and C. M. KENNEFICK, Acta Metall Mater. 39 (1991) 3187.
131. J. SINGH, S. K. GOEL, U. N. S. MATHUR and M. L. KAPOOR, in "Proceedings of the Conference on Advances in Composite Materials", edited by P. Ramakrishnan (Oxford & IBH, New Delhi, India, 1991) p. 281.
132. M. IGNAT and D. CAILLARD, in "Proceedings of the Materials Research Society Annual Meeting", edited F. D. Lenskey, H. E. Cline and M. Melean (1991) p. 115.
133. M. IGNAT, R. BONNET and F. DURAND, ibid., p. 135.
134. DENNIS. W. HETZNER, ibid., p. 329.
135. W. H. S. LANSON and H. W. KERR, Metall. Trans. 2 (1971) 2853.
136. W. M. T. GALLERNEAULT, C. M. GABRIEL, Pat. EP 0312295 (European Patent), Convention date 11 October 1988.