Thermal effects on the pin-bearing behavior of IM7/PET15 composite joints

Journal of Composite Materials

Volumn 36, Issue 23, 2002, Pages 2623-2652

  Walker, Sandra P ^a  

^a NASA LANGLEY RESEARCH CENTER   (United States)

Author keywords

3D finite element stress analysis; Composite joints; Cure stresses; Pin bearing; Thermal effects; Thermal residual stresses

Indexed keywords

COMPUTATIONAL METHODS; CURING; DEGRADATION; FINITE ELEMENT METHOD; FRICTION; MATHEMATICAL MODELS; RESIDUAL STRESSES; RESINS; STRESS ANALYSIS; THERMAL EFFECTS; THERMAL STRESS;

COMPOSITE JOINTS; PIN BEARING;

LAMINATED COMPOSITES;

EID: 0036950985     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1177/002199802761675557     Document Type: Article

References (45)

1. Williams, Louis J. (April 1995). HSCT Research Gathers Speed. Aerospace America, 32-37.
2. Sawyer, J. (1996). Graphite-Composite Primary Structure for Reusable Launch Vehicles, AIAA Space Programs and Technologies Conference, September 24-26, Huntsville, AL, AIAA-96-4268.
3. Kim, R.Y. and Whitney, J.M. (1976). Effect of Temperature and Moisture on Pin Bearing Strength of Composite Laminates, J. Composite Materials, 10: 149-155.
4. Wilkins, D.J. (1977). Environmental Sensitivity Tests of Graphite-Epoxy Bolt Bearing Properties, Composite Materials: Testing and Design (Fourth Conference), ASTM STP 617, American Society for Testing and Materials, pp. 497-513.
5. Wilson, D.W. and Pipes, R.B. (September 1979). Behavior of Composite Bolted Joints at Elevated Temperature. NASA CR-159137.
6. Perry, J.C. and Hyer, M.W. (June 1979). Investigations into the Mechanical Behavior of Composite Bolted Joints, NASA CR-163295.
7. Wichorek, G.R. (1979). Preliminary Bolted Joint Data, In: Graphite/Polimide Composites, NASA Conference Publication 2079, pp. 249-258.
8. Kong, S.J. (1981). Bolt Bearing Strengths of Graphite/Epoxy Laminates, AIAA/ASME/ASCE/AHS 22nd Structures, Structural Dynamics and Materials Conference, Atlanta, Georgia, AIAA Paper 81-0544, 6-8 April, pp. 158-165.
9. Ramkumar, R.L. and Tossavainen, E.W. (August 1984). Bolted Joints in Composite Structures: Design, Analysis and Verification, Task 1 Test Results-Single Fastener Joints, AFWAL-TR-84-3047.
10. Ramkumar, R.L. and Tossavainen, E.W. (1986). Strength and Lifetime of Bolted Joints, In: Potter John M. (ed.), Fatigue in Mechanically Fastened Composite and Metallic Joints, ASTM STP 927, American Society for Testing and Materials, Philadelphia, pp. 251-273.
11. Morgan, M.E. and Beckwith, S.W. (1985). Bolt Torque Loading and Radial Gap Effects on Thick-Wall Composite Joint Strength, In: Proceedings of 30th National SAMPLE Symposium, Anaheim, Ca, March 19-21, Vol. 30, pp. 1321-1334.
12. Gerharz, J.J. and Huth, H. (March 1988). Effect of Environment and Improvement Measures on Static and Fatigue Strength of Bolted CRFP-Joints, AGARD-CP-427, pp. 19.
13. Liu, D., Yi-Bing, L. and Bing-Zhang, Y. (1989). Damage Detection and Damage Mechanisms Analyses in CFRP Laminate Bolted Joints, Composite Structures 5. Proceedings of the Fifth International Conference, Paisley, Scotland, July 24-26, Elsevier Applied Science, London and New York, pp. 591-601.
14. Garbo, S.P. and Ogonowski, J.M. (April 1981). Effect of Variances and Manufacturing Tolerances on the Design Strength and Life of Mechanically Fasten Composite Joints, AFWAL-TR-81-3041, Vol. 1.
15. Bailie, J.A., Duggan, M.F., Bradshaw, N.C. and McKenzie, T.G. (1981). Design Data for Graphite Cloth Epoxy Bolted Joints at Temperatures up to 450K. Joining of Composite Materials, ASTM STP 749, pp. 165-180.
16. Bailie, J.A., Fisher, L.M., Howard, S.A. and Perry, K.G. (1981). Some Environmental and Geometric Effects on the Static Strength of Graphite Cloth Epoxy Bolted Joints, Composite Structures, Proceedings of the First International Conference, Pailsey, Scotland, September 16-18, Applied Science Publishers, London, pp. 63-78.
17. Maekawa, Z., Kaji, A., Hamada, H., and Nagamori, M. (1985). Failure Mode and Strength Predictions of Mechanically Fastened Composite Joints, Proceedings of the Fifth International Conference on Composite Materials, The Metallurgical Society, July 29-August 1, pp. 99-109.
18. Chen, W.H. and Lee, Y.J. (July 1992). Failure Process and Pin-bearing Strength of Laminated Composites at Elevated Temperature. Journal of Reinforced Plastics and Composites, 11 (7): 743-771.
19. Chen, W. H. and Lee, Y. J. (1992). Effect of Temperature on the Contact Stresses and Residual Bearing Strength of Pin-loaded Composite Laminates, Journal of Thermal Stresses, 15 (3): 419-437.
20. Rybicki, E.F. and Schmueser, D.W. (August 1976). Three-dimensional Finite Element Stress Analysis of Laminated Plates Containing a Circular Hole, Technical Report AFML-TR-76-92.
21. Raju, I.S. and Crews, J.H. (August 1980). Interlaminar Stress Singularities at a Straight Free Edge in Composite Laminates, NASA TM 81876.
22. Raju, I.S., Whitcomb, J.D., and Goree, J.G. (December 1980). A New Look at Numerical Analysis of Free-Edge Stresses in Composite Laminates, NASA Technical Paper 1751.
23. Smith, P.A. and Pascoe, K.J. (1986). The Effect of Stacking Sequence on the Bearing Strengths of Quasi-isotropic Composite Laminates, Composite Structures, 6 (1-3): 1-20.
24. Annual Book of ASTM Standards, (1996). Sec. 15, Vol. 15.03, D5961M-96, pp. 310-323.
25. (1994). MIL-HDBK-17, Military Handbook, Polymer Matrix Composites, Guidelines, U.S. Dept. of Defense, Vol. 1.
26. Crews, J.H. and Naik, R.V.A. (1986). Failure Analysis of a Graphite/Epoxy Laminate Subjected to Bolt-Bearing Loads, Composite Materials: Fatigue and Fracture, ASTM STP 907, American Society of Materials, Philadelphia, pp. 115-133.
27. Kallmeyer, A.R. and Stephens, R.I. (1999). A Finite Element Model for Predicting Time-dependent Deformations and Damage Accumulation in Laminated Composite Bolted Joints, Journal of Composite Materials, 33 (9): 794-826.
28. Wright, R.J., Johnson, W.S. and Ahmad, H. (1997). Bolt Bearing Behavior of Highly Loaded Composite Joints at Elevated Temperatures with and without Clampup, Department of Material Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia.
29. Teledyne Vasco (1982). P.O. Box 151, LaTrobe, PA.
30. Walker, S.P. (May 2001). Thermal Effects on the Bearing Behavior of Composite Joints, PhD. Dissertation, University of Virginia.
31. MSC/PATRAN/NASTRAN (July 1997). Structural Analysis, Version 7, Vol. 1, The MacNeal-Schwendler Corporation, Los Angeles, CA.
32. Hyer, M.W., Klang, E.C. and Cooper, D.E. (March 1987). The Effect of Pin Elasticity, Clearance, and Friction on the Stresses in a Pin-loaded Orthoptropic Plate, Journal of Composite Materials, 21: 190-206.
33. Garbo, S.P. and Ogonowski, J.M. (April 1981). Effect of Variances and Manufacturing Tolerances on the Design Strength and Life of Mechanically Fastened Composite Joints, AFWAL-TR-81-3041.
34. Collings, T.A. (July 1982). On the Bearing Strengths of CFRP Laminates, Composites, 241-252.
35. Tsujimoto, Y. and Wilson, D. (May 1986). Elasto-plastic Failure Analysis of Composite Bolted Joints, Journal of Composite Materials, 20: 236-252.
36. De Jong, T. (July 1977). Stresses Around Pin-loaded Holes in Elastically Orthotropic or Isotropic Plates, Journal of Composite Materials, 11: 313-331.
37. Marshall, I.H., Arnold, W.S. and Wood, J. (1989). Observations on Bolted Connections in Composite Structures, Composite Structures, 13: 133-151.
38. Mathews, F.L., Wong, C.M. and Chryssafitis, S. (July 1982). Stress Distribution Around a Single Bolt in Fibre-Reinforced Plastic, Composites, 13: 316-322.
39. Sperling, U.O. (1985). Three-dimensional Stress Distribution Around Pin Loaded Holes in Composite Laminates, AIAA 85-0826, pp. 743-750.
40. Chen, W.H., Lee, S.W. and Yeh, J.T. (1995). Three-dimensional Contact Analysis of a Composite Laminate with a Bolted Joint, Composite Structures, 30: 287-297.
41. 3S Pin-loaded laminates, Journal of Composites Technology and Research, 13: 236-248.
42. Persson, E., Madenci, E. and Eriksson, I. (July 1998). Delamination Initiation of Laminates with Pin-loaded Holes, Journal of Theoretical and Applied Fracture Mechanics, 714.
43. (1994). MARC User Information, MARC Analysis Research Corporation, Palo Alto, CA, Volume A.
44. Shokreih, M.M. and Lessard, L.B. (1996). Effects of Material Nonlinearity on the Three-dimensional Stress State of Pin-loaded Composite Laminates, Journal of Composite Materials, 30 (7): 839-861.
45. Jones, Robert M. (1998). Mechanics of Composite Materials, 2nd Edn, Taylor & Francis, Inc., Philadelphia, PA.