New PMMA bone cements for use in vacuum mixing systems;Neue PMMA-knochenzemente zur anwendung in vakuummischsystemen

Orthopade

Volumn 31, Issue 6, 2002, Pages 556-562

  Schelling, K ^a   Heisel, C ^a   Schnurer S M ^a   Mau, H ^a   Breusch, S J ^a  

^a UNIVERSITY HOSPITAL HEIDELBERG   (Germany)

Author keywords

Bone cement; Cemented; Cementing technique; Total hip replacement; Vacuum mixing

Indexed keywords

BONE CEMENT; PALACOS;

ARTICLE; FRACTURE; HUMAN; INDUCED HYPOTHERMIA; POROSITY; TENSILE STRENGTH; TOTAL HIP PROSTHESIS; VACUUM; VISCOSITY;

EID: 0036933938     PISSN: 00854530     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00132-002-0301-5     Document Type: Article

References (46)

1. Alkire MJ, Dabezies EJ, Hastings PR (1987) High vacuum as a method of reducing porosity of polymethylmethacrylate. Orthopedics 10: 1533-1539
2. Anthony PP, Gie GA, Howie CR, Ling RSM (1990) Localised endosteal bone lysis in relation to the femoral components of cemented total hip arthroplasties. J Bone Joint Surg Br 72: 971-979
3. Ballard WT, Callaghan JJ, Sullivan PM, Johnston RC (1994) The results of improved cementing techniques for total hip arthroplasty in patients less than fifty years old. J Bone Joint Surg Am 76: 959-964
4. Barrack RL, Mulroy RD, Harris WH (1992) Improved cementing techniques and femoral component loosening in young patients with hip arthroplasty. J Bone Joint Surg Br 74: 385-389
5. Beckenbaugh RD, Ilstrup DM (1978) Total hip arthroplasty. A review of three hundred and thirty-three cases with long follow-up. J Bone Joint Surg Am 60: 306-313
6. Benjamin JB, Gie GA, Lee AJC, Ling RSM, Volz RG (1987) Cementing technique and the effects of bleeding. J Bone Joint Surg Br 69: 620-624
7. Britton AR, Murray DW, Bulstrode CJ, McPherson K, Denham RA (1996) Long-term comparison of Charnley and Stanmore design total hip replacements. J Bone Joint Surg Br 78: 802-808
8. Carlsson AS, Nilsson JA, Blomgren G, Josefsson G, Lindberg LT, Önnerfält R (1993) Low-vs-high viscosity cement in hip arthroplasty. Acta Orthop Scand 64: 257-262
9. Davies JP, Harris WH (1990) Optimization and comparison of three vacuum mixing systems for porosity reduction of Simplex. Clin Orthop Relat Res 254: 261-269
10. Draenert K (1988) Zur Praxis der Zementverankerung. Forschung und Fortbildung in der Chirurgie des Bewegungsapparates, 2. Art and Science, München
11. Ege W (1984) Normung von Knochenzementen. In: Willert H-G, Buchhorn G (Hrsg) Aktuelle Probleme in Chirurgie und Orthopädie, Bd 31. Huber, Bern Stuttgart, S 133-135
12. Eyerer P, Jin R (1986) Influence of mixing technique on some properties of PMMA bone cement. J Biomed Mater Res 20: 1057-1094
13. Hahn M, Engelbrecht E, Delling G (1990) Eine quantitative Analyse zur Bestimmung der Porosität von vorkomprimiertem und unter Vakuum gemischtem Knochenzement. Chirurg 61: 512-517
14. Hansen D, Jensen JS (1990) Prechilling and vacuum mixing not suitable for all bone cements. Handling characteristics and exotherms of bone cements. J Arthroplasty 5: 287-290
15. Hansen D, Jensen JS (1992) Mixing does not improve mechanical properties of all bone cements. Acta Orthop Scand 63: 13-18
16. Havelin LJ, Espehaug B, Vollset E, Engsaeter LB (1995) The effect of the type of cement on early revision of Charnley total hip prostheses. J Bone Joint Surg Am 77: 1543-1550
17. James SP, Jasty M, Davies J, Piehler H (1992) A fractographic investigation of PMMA bone cement focusing on the relationship between porosity reduction and increased fatigue life. J Biomed Mater Res 26: 651-662
18. Jasty M, Maloney WJ, Bragdon CR, O'Connor DO, Haire T, Harris WH. (1991) The initiation of failure in cemented femoral components of hip arthroplasties. J Bone Joint Surg Br 73: 551-558
19. Kindt-Larsen T, Smith DB, Jensen JS (1995) Innovations in acrylic bone cement and application equipment. J Appl Biomat 6: 75-83
20. Kühn KD. Comparative tests of antibiotic-loaded cements (2000) In: Bone Cements. Up-to-date comparison of physical and chemical properties of commercial materials. Springer, Berlin Heidelberg New York Tokio, pp 228
21. Kurdy NMG, Hodgkinson JP, Haynes R (1996) Acrylic bone-cement, influence of mixer design and unmixed powder. J Arthroplasty 11: 813-819
22. Lee AJC, Ling RS, Vangal SS (1978) Some clinically relevant variables affecting the mechanical behaviour of bone cement. Arch Orthop Traumat Surg 92: 1-18
23. Lidgren U, Drar H, Möller J (1984) Strength of polymethylmethacrylate increased by vacuum mixing. Acta Orthop Scand 55: 536-541
24. Lidgren U, Bodelind B, Möller J (1987) Bone cement improved by vacuum mixing and chilling. Acta Orthop Scand 57: 27-32
25. Linden U (1988) Porosity in manually mixed bone cement. Clin Orthop Relat Res 231: 110-112
26. Ling RSM (1998) Porosity reduction in cement is not necessary for cemented total hip arthroplasty. The Hip Society and AAHKS, New Orleans, p 22
27. Ling RSM, Lee AJC (1998) Porosity reduction is clinically irrelevant. Clin Orthop Relat Res 355: 249-253
28. Majkowski RS, Bannister GC, Miles AW (1994) The effect of bleeding on the cement-bone interface. Clin Orthop Relat Res 299: 293-297
29. Malchau H, Herberts P (1996) Prognosis of total hip replacement: Surgical and cementing technique in THR. 63rd Annual Meeting of the American Academy of Orthopaedic Surgeons, February 22-26, Atlanta, USA
30. Malchau H, Herberts P (1998) Prognosis of total hip replacement in Sweden: Revision and re-revision rate in THR. 65th Annual Meeting of the American Academy of Orthopaedic Surgeons, New Orleans, LA, USA
31. Malchau H, Herberts P, Söderman P, Odén A (2000) Prognosis of total hip replacement: Update and validation of results from the Swedish National Hip Arthroplasty Registry. 67th Annual Meeting of the American Academy of Orthopaedic Surgeons, March 15-19, Orlando, USA
32. Mulroy RD, Harris WH (1990) The effect of improved cementing techniques on component loosening in total hip replacement. An 11-year radiographic review. J Bone Joint Surg Br 72: 757-760
33. Mulroy RD, Harris WH (1997) Acetabular and femoral fixation 15 years after cemented total hip surgery. Clin Orthop 337: 118
34. Pazzaglia UE (1990) Pathology of the bonecement interface in loosening of total hip replacement. Arch Orthop Trauma Surg 109: 83-88
35. Rimnac M, Wright TM, McGill D (1986) The effect of centrifugation on the fracture properties of acrylic bone cements. J Bone Joint Surg 68: 281
36. Roberts DW, Poss R, Kelley K (1986) Radiographic comparison of cementing techniques in total hip arthroplasty. J Arthroplasty 1986: 241-247
37. Russotti GM, Coventry MB, Stauffer RN (1988) Cemented total hip arthroplasty with contemporary techniques. A five-year follow-up study. Clin Orthop 235: 141-147
38. Schurman DJ, Swenson LW, Piziali RL (1978) Bone cement with and without antibiotics: A study of mechanical properties. In: The hip proceedings of the sixth open scientific Meeting of the Hip Society. Mosby, St. Louis, pp 87-96
39. Smeds S, Goertzen D, Ivarsson I (1997) Influence of temperature and vacuum mixing on bone cement properties. Clin Orthop Relat Res 334: 326-334
40. Stauffer RN (1982) Ten year follow-up study of total hip replacement: With particular reference to roentgenographic loosening of the components. J Bone Joint Surg Am 64: 983-990
41. Topoleski LDT, Ducheyne P, Cuckler JM (1995) The effects of centrifugation and titanium fiber reinforcement on fatigue failure mechanisms in polymethylmethacrylate bone cement. J Biomed Mater Res 29: 299-307
42. Walde H-J, Rudigier J, Wagner R (1987) Beanspruchungsbedingte Strukturveränderungen des Knochenzementes - Untersuchungen an reoperierten Präparaten. In: Willert H-G, Buchhorn G (Hrsg) Aktuelle Probleme in Chirurgie und Orthopädie, Bd 31. Huber, Bern Stuttgart
43. Wang JS, Franzen H, Jonsson E, Lidgren L (1993) Porosity of bone cement reduced by mixing and collecting under vacuum. Acta Orthop Scand 64: 143-146
44. Wang JS, Toksvig-Larsen S, Müller-Wille, Franzen H (1996) Is there any difference between vacuum mixing systems in reducing bone cement porosity? J Biomed Mater Res 33: 115-119
45. Wilkinson JM, Eveleigh R, Hamer AJ, Milne A, Miles AW, Stockley I (2000) Effect of mixing technique on the properties of acrylic bone-cement: a comparison of syringe and bowl mixing systems. J Arthroplasty 15: 663-667
46. Wixson RL, Lautenschlager EP, Novak MA (1987) Vacuum mixing of acrylic bone cement. J Arthroplasty 2: 141-149