Mixed lubrication - Experiment and theory

Tribology Series

Volumn 40, Issue , 2002, Pages 95-113

  Spikes, H A ^a   Olver, A V ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER MODEL; CONFERENCE PAPER; FILM; FLOW KINETICS; FLUID FLOW; HYPERBARISM; LUBRICATION; MATHEMATICAL ANALYSIS; MIXED LUBRICATION; MOLECULAR DYNAMICS; PHYSICAL CHEMISTRY; SHEAR RATE; THEORY; THICKNESS; WEIGHT BEARING;

EID: 0036882444     PISSN: 01678922     EISSN: None     Source Type: Book Series    
DOI: 10.1016/s0167-8922(02)80011-6     Document Type: Conference Paper

References (94)

1. "A full numerical solution to the mixed lubrication in point contacts." Trans ASME, J. of Tribology, 122, (2000), pp. 1-9.
2. Elcoate, C.D., Evans, H.R., Hughes, T.G. and Snidle, R.W., "Transient elasto-hydrodynamic analysis using a novel coupled differential deflection method." submitted for publication in Proc. I.Mech.E Ser. J.
3. Guangteng, G., Cann, P.M., Olver, A.V. and Spikes, H.A. "Lubricant film thickness in rough surface, mixed elastohydrodynamic contact." Trans. ASME, J of Tribology, 122, (2000), pp. 65-76.
4. Luo, J.B., Qian, L.M., Wen, S., Liu, S and Wen, S. "The failure of fluid film at nano-scale." Trib. Trans. 42, (1999), pp. 912-916.
5. Reynolds, O. "On the theory of lubrication and its application to Mr. Beauchamp Tower's experiments, including an experimental determination of the viscosity of olive oil." Phil. Trans. Roy. Soc. A177, (1886), pp. 157-234.
6. Kingsbury, A., "A new oil testing machine and some of its results." Trans. ASME 24, (1903), pp. 143-160.
7. Falz, E., "Principles of the design of journal bearings." I. Mech. E. Proc. General Discussion of Lubrication and Lubricants, Oct 1937, Vol 1, pp. 93-100, publ. I Mech. Eng., London, 1937
8. Cameron, A., "The surface-roughness of bearing surfaces and its relation to oil film thickness at breakdown." Proc. I. Mech. E. 161, (1949), pp. 73-79.
9. Cameron, A., Principles of Lubrication, publ. Longmans, 1966.
10. Tallian, T.R., "The theory of partial elastohydrodynamic contacts." Wear 21, (1972), pp. 49-103.
11. Rohde, S.M., "A mixed friction model for dynamically loaded contacts with application to piston ring lubrication." Proc Leed-Lyon Symp. on Tribology, Friction and Traction, Sept, 1980, ed. D. Dowson et al., publ. Westbury House, Guildford, 1981.
12. Spikes, H.A. "Mixed lubrication - an overview." Lubrication Science 9, (1997), pp. 221-253.
13. th Leeds-Lyon Symposium on Tribology, Surface Roughness Effects in Lubrication, 1977, publ. MEP Ltd., London, 1978
14. Horn, R.G. and Israelachvili, J.N. "Direct measurement of structural forces between two surfaces in a nonpolar liquid." J. Chem. Phys. 75, (1981), pp. 1400-141.
15. J Israelachvili, Intermolecular & Surface Forces, 2nd Edition, publ. Academic Press, London, 1992.
16. Granick, S. "Motions and relaxations of confined liquids." Science 253, (1991), pp. 1374-1379.
17. Homola, A.M., Israelachvili, J.N., Gee, M.L. and McGuiggan, P.M. "Measurement of and relation between the adhesion and friction of two surfaces separated by molecularly thin liquid films." Trans. ASME, J. of Tribology, 111, (1989), pp. 675-682.
18. Matsuoka, H. and Kato, T. "Experimental study of ultrathin liquid lubrication film thickness at the molecular scale." Proc. I. Mech. E., J211, (1997), pp. 139-150.
19. Tonck, A., Georges, J.M. and Loubet, J.L. "Measurements of intermolecular forces and the rheology of dodecane between alumina surfaces." J. Coll. and Interface Sci. 126, (1988), pp. 150-163.
20. Georges, J.M., Millot, S., Loubet, J.L. and Tonck, A. "Drainage of thin liquid films between relatively smooth surfaces." J. Chem. Phys. 98, (1993), pp. 7345-7360.
21. Luengo, G., Israelachvili, J. and Granick, S. "Generalized effects in confined fluids: a new friction map for boundary lubrication." Wear 200, (1996), pp. 328-335.
22. Christenson, H.K. and Israelachvili, J.N., "Direct measurements of interactions and viscosity of crude oils in thin films between model clay surfaces." J. Coll. & Interf Sci. 119, (1987), pp. 194-202.
23. Ruths, M., Yoshizawa, H., Fetters, L.J. and Isralachvili, J.N., "Depletion attraction versus steric repulsion of a system of weakly absorbing polymer - effects of concentration and adsorption conditions." Macromolecules 29, (1996), pp. 7193-7203.
24. Georges, E., Georges, J-M. and Diraison, C., "Rheology of olefinic copolymer layers adsorbed on solid surfaces." Trib. Trans. 39, (1996), pp. 563-570.
25. Georges, J.-M., Tonck, A. and Mazuyer, D. "Interfacial friction of wetted monolayers." Wear 175, (1994), pp. 59-62.
26. Johnston, G.J., Wayte, R. and Spikes, H.A. "The measurement and study of very thin lubricant films in concentrated contacts." Trib. Trans. 34, (1991), pp. 187-94.
27. Guangteng, G. and Spikes, H.A. "Boundary film formation by lubricant base fluids." Trib. Trans. 39, (1996), pp. 448-454.
28. Smeeth, M., Gunsel, S. and Spikes, H.A. "Boundary film formation by viscosity index improvers." Trib. Trans. 39, (1996), pp. 726-734.
29. Hamrock and D Dowson, Ball Bearing Lubrication: the Elastohydrodynamics of Elliptical Contacts, publ. J. Wiley, New York, 1981.
30. Wedeven, L.D., Evans, D. and Cameron, A. "Optical analysis of ball bearing starvation." Trans. ASME, J. Lub. Tech. 93, (1971), pp 349-361.
31. Spikes, H.A. and Ratoi M. "Molecular scale liquid lubricating films." Proc. Leeds/Lyon Symposium, Thinning Films and Tribological Interfaces, Leeds, Sept. 1999, ed. D Dowson et al., publ. Elsevier, Amsterdam, 2000.
32. Guangteng, G. and Spikes, H.A. "Fractionation of Lubricants at Solid Surfaces." Wear 200, (1996), pp. 336-345.
33. Guangteng, G. and Spikes, H.A. "The control of friction by molecular fractionation of base fluid mixtures at metal surfaces." Trib. Trans. 40, (1997), pp. 461-469.
34. Smeeth, M., Gunsel, S. and Spikes, H.A. "The Formation of Viscous Surface Films by Polymer Solutions: Boundary or Elastohydrodynamic Lubrication." Trib. Trans. 39, (1996), pp. 720-725.
35. Smeeth, M., Gunsel, S. and Spikes, H.A. "Boundary film formation by viscosity index improvers." Trib. Trans. 39, (1996), pp. 726-734.
36. Anghel, V. Bovington, C. and Spikes H.A. "Thick film formation by friction modifier additives." Lubrication Science 11, (1999), pp. 313-335.
37. Jang, S and Tichy, J A, "Rheological models for thin film ehl contacts." Trans. ASME J of Tribology 117, pp. 22-28, (1995).
38. Guangteng, G, Smeeth, M, Cann, P M, and Spikes, H A, "Measurement and modelling of boundary film properties of polymeric lubricant additives." Proc. Instn Mech. Engrs J210, (1996), pp. 1-15.
39. Qu, Q W, Hu, Y, and Zhu, J, "An adsorbent layer model for thin film lubrication." Wear 221, (1998), pp. 9-14.
40. Qu, Q W, Meng, L X, Chai, S, and Niu, S T, "A new model for thin film lubrication." Proc. 1. Mech. E, J215, (2001), 103-107.
41. Tichy, J A, "A surface layer model for thin film lubrication." Trib. Trans. 38, (1995), pp. 577-583.
42. Jang, S and Tichy, J A, "Modelling of mixed hydrodynamic and boundary lubrication: layered structures and shear thinning." Proc. I. Mech. E. 212, (1996), pp. 171-177.
43. Matsuoka, H. and Kato, T., "An ultrathin liquid film lubrication theory - calculation method of solvation pressure and nits application to the EHL problem." Trans ASME J. of Tribology 119,(1997), pp. 217-226.
44. Manias, E', Hadziioannou, G' and ten Brinke, G', "Inhomogeneities in sheared ultrathin lubricating films." Langmuir 12, (1996), pp. 4578-4598.
45. Landmann, U, Luedtke, W D, and Gao, J, "Atomic-scale issues in tribology: interfacial junctions and nano-elastohydrodynamics." Langmuir 12, (1996), pp. 4515-4528.
46. Tallian, T.E., Chiu, Y.P., Huttenlocher, D.F., Kamenshine, J.A., Sibley, L.B. and Sindlinger, N.E., "Lubricant films in rolling contact of rough surfaces." ASLE Trans. 7, (1964), pp. 109-124.
47. Czichos, H., "Untersuchung uder die Verteilung Metallischer und Michtmetallischer Kontakteile bei Mischreibung." Wear 17, (1971), pp. 209-217.
48. Palacios, J.M., Elastohydrodynamic films in mixed lubrication conditions: an experimental investigation." Wear 89, (1983), pp. 303-312.
49. Guangteng, G., Olver, A.V., and Spikes H.A. "Contact resistance measurements in mixed lubrication." Publ. in The Advancing Frontier of Engineering Tribology, Proc. 1999 STLE/ASME H.S.Cheng Tribology Surveillance 1999, ed. Q Wang, J Netzel and F Sadeghi.
50. Jackson, A. and Cameron, A., "Effects of asperities in elastohydrodynamic lubrication." ASLE Trans. 19, (1976), pp. 50-56.
51. Wedeven, L.D. and Cusano, C., "Elastohydrodynamic film thickness measurements of artificially produced dents and grooves." ASLE Trans. 22, (1979), pp. 369-381.
52. Cusano, C. and Wedeven, L.D., "Elastohydrodynamic film thickness measurements of artificially produced nonsmooth surfaces." ASLE Trans. 24, (1980), p. 1014.
53. Kaneta, M. and Cameron A., "Effects of asperities in elastohydrodynamic lubrication." Trans. ASME J. Lub. Tech. 102, (1980), pp. 374-379.
54. Cusano, C. and Wedeven, L.D,. "The effects of artificially produced defects in the film thickness distribution in sliding EHD point contacts." Trans ASME J. Lub. Tech. (1982), pp. 365-375.
55. Tondor, K. and Jakobsen, J., Interferometric studies of effects of striated roughness on lubricant film thickness under elastohydrodynamic conditions." Trans. ASME J. Trib. 114, (1992), pp. 52-56.
56. Kaneta, M., Sakai, T. and Nishikawa, H., "Effects of surface roughness on point contact EHL." Trib. Trans. 36, (1993), pp. 605-612.
57. Kaneta, M. and Nishikawa, H. "Local reduction in thickness of point contact EHL films caused by a transversely oriented moving groove and its recovery." Trans. ASME, J. of Trib. 116, (1994), pp. 635-639.
58. Kaneta, M. and Nishikawa, H. "The effects of a transversely oriented bump on point contact EHL in reciprocating motion with a small stroke length." Proc Leeds-Lyon Symposium, Lubrication at the Frontier, Lyon, Sept. 1998, ed. D Dowson et al., published, Elsevier 1999.
59. Gustafsson, L., Höglund, E. and Marklund, O. "Measuring lubricant film thickness with image analysis", Proc. I. Mech. E. J208, (1994), pp. 199-205.
60. Cann, P.M., Hutchinson, J. and Spikes, H.A. "The development of a spacer layer imaging method (slim) for mapping elastohydrodynamic contacts." Trib. Trans. 39, (1996), pp. 915-921.
61. Hartl, M., Krupka, I. and Liska, M. "Differential colorimetry: tools for evaluation of chromatic interference patterns", Opt. Eng. 36, (1997), pp. 1-8.
62. Molimard, J., Querry, M. and Vergne, P., "New tools for the experimental study of EHD and limit lubrications." Proc. 25th Leeds/Lyon Symp. on Tribology, Lubrication at the Frontier, ed. D. Dowson et al., publ. Elsevier, Amsterdam, 1999.
63. Guangteng, G., Cann, P.M., Olver, A.V. and Spikes, H.A. "Mapping surface features in the thin film lubrication regime." Proceedings of Leeds-Lyon Symposium, Lyon, Sept. 1998, pp. 175-183. Publ. Elsevier, 1999.
64. Ehret, P., Lord, J., Larrson. R. and Marklund, O., "Experimental analysis of microelastohydrodynamic lubricated contact." Synopses of Intern. Tribology Conf., Nagasaki, Nov. 2000, 4B3-2, p. 479.
65. Guangteng, G., Cann, P.M., Olver, A.V. and Spikes, H.A. "Lubricant film thickness in rough surface, mixed elastohydrodynamic contact." Trans. ASME, J of Tribology, 122, (2000), pp. 65-76.
66. Guangteng, G., Cann, P.M., Olver, A.V. and Spikes, H.A. "An experimental study of film thickness between rough surfaces in EHD contact." Tribology Intern. 33, (2000), pp. 183-189.
67. O'Shea, S.J., Welland, M.E. and Rayment, T. "Atomic force microscope study of boundary layer lubrication." Appl. Phys. Lett. 61, (1992), pp. 2240-2242.
68. O'Shea, S.J., and Welland, M.E. "Atomic force microscopy at solid-liquid interfaces." Langmuir 14, (1998), pp. 4186-4197.
69. A G M Mitchell, Lubrication, its Principles and Practice, Blackie, London, 1950.
70. Christensen, H. and Tondor, K., "The hydrodynamic lubrication of rough bearing surfaces of finite width." Trans ASME J. Lub. Tech. 93, (1971), pp. 324-329.
71. Christensen, H. "Some aspects of the functional influence of roughness in lubrication." Wear 17, (1971), pp. 149-162.
72. Patir N., and Cheng, H.S., "Applicatiion of average flow models to lubrication between rough sliding surfaces." Trans. ASME J. Lub. Tech. 110, (1978), pp. 12-17.
73. Johnson, K.L., Greenwood, J.A. and Poon, S.Y., A simple theory of asperity contact in elastohydrodynamic lubrication." Wear 19, (1972), (1972), pp. 91-108.
74. Shelley, P. and Ettles, C. "Effect of transverse and longitudinal surface waviness upon the operation of journal bearings." J. Mech. Eng. Sci. 14, (1972), pp. 168-172.
75. th Leeds-Lyon Symp., Surface Roughness Effects in Lubrication, Sept, 1977, ed. D Dowson et al. MEP, London, 1978.
76. th Leeds-Lyon Symp. on Tribology, Surface Roughness Effects in Lubrication, 1977, ed. D Dowson et al. MEP, London, 1978.
77. th Leeds-Lyon Symposium on Tribology, Mixed Lubrication and Lubricated Wear, (1984)
78. Ai, X. and Zheng, L., "A general model for microelastohydrodynamic lubrication and its full numerical solution." ASME Trans., J. of Tribology 111, (1989), pp. 569-576.
79. Greenwood, J.A. and Johnson, K.L., "The behaviour of transverse roughness in sliding elastohydrodynamically lubricated contacts." Wear 153, (1992), pp. 107-117.
80. Chang, L., Webster, M.N. and Jackson, A., "On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces." ASME Trans., J. of Tribology 115, (1993), pp. 439-444.
81. Chang, L., "A deterministic model for linecontact partial elastohydrodynamic lubrication", Trib. International, 28, (1995), pp. 75-84.
82. Venner, C.H. and Lubrecht, A.A., "Numerical simulation of a transverse ridge in a circular EHL contact under rolling/sliding." ASME Trans. J. of Tribology, 116, (1994), pp. 751-761.
83. Venner, C.H. and Lubrecht, A.A., "Transient analysis of surface features in an EHL line contact in the case of sliding." ASME Trans., J of Tribology, 116, (1994), pp. 186-193.
84. Ai, X. and Cheng, H.S., "A transient EHL analysis for line contacts with measured surface roughness using multigrid technique." ASME Trans., J. of Tribology 116, (1994), pp. 549-558.
85. Venner, C.H. and Lubrecht, A.A., "Numerical analysis of the influence of waviness on the film thickness of a circular EHL contact." Trans. ASME J. of Tribology 118, (1996), pp. 153-161.
86. Lubrecht, A.A. and Venner, C.H., "Elastohydrodynamic lubrication of rough surfaces." Proc. I. Mech. E., J213, (1999), pp. 397-404.
87. Hooke, C.J., "the behaviour of low-amplitude surface roughness under line contacts." Proc. I. Mech. E., J213, (1999), pp. 275-286.
88. Hooke, C.J. and Venner, C.H., "Surface roughness attenuation in line and point contacts." Proc. I. Mech. E., J214, (2000), pp. 439-444.
89. Hu, Y-Z and Zhu, D, "A full numerical solution to the mixed lubrication in point contacts." Trans ASME J. of Tribology, 122, (2000), pp. 100-120.
90. Tao, J, Hughes, T G, Evans, H P, and Snidle, R W, "Elastohydrodynamic response of transverse gound gear teeth." Proc 28th Leeds-Lyon Conference on Tribology, Vienna, September, 2001.
91. th Leeds-Lyon Symp. on Tribology, Thinning Films and Tribological Interfaces, ed. D. Dowson et al., publ. ., Elsevier, 2000.
92. Blencoe, K A, and Williams, J A, "Friction of sliding surfaces carrying boundary films." Wear 203, (1997), pp. 722-729.
93. Gao, J., Luedktke, W.D. and Landman, U., "Structures, solvation forces and shear of molecular films in a rough nano-confinement." Tribology Letters, In the Press.
94. Gao, J., Luedktke, W.D. and Landman, U., "On the effects of surface roughness on structures, solvation forces an shear of molecular films in a nano-confinement." Proc. NATO Course, Keszthely, Hungary, August 2000, Fundamentals of Tribology and Bridging the Gap between Macro- and Micro/Nanoscales., pp. 583-605, ed. B Bhushan, publ. Kluwer Acad. Publ. Netherlands.