Recommendations for determining residual stresses in fitness-for-service applications

Welding Research Council Bulletin

Volumn , Issue 476, 2002, Pages 1-61

  Dong, P ^a  

^a BATTELLE MEMORIAL INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CODES (STANDARDS); COST EFFECTIVENESS; METALLURGY; RESIDUAL STRESSES; STRUCTURAL ANALYSIS; THERMOMECHANICAL TREATMENT; WELDING; WELDS;

FITNESS FOR SERVICE APPLICATIONS; STRESS EVOLUTION; WELDING PROCESS PHYSICS;

STRESS ANALYSIS;

EID: 0036872897     PISSN: 00432326     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (63)

1. Michaleris, P., Kirk, M., and Laverty, K., "Incorporation of Residual Stresses into Fracture Assessment Models," Project Report to The Materials Properties Council, November, 1995.
2. Koppenhoefer, K.C., Feng, Z., and Cheng, W., "Incorporation of Residual Stresses Caused by Welding into Fracture Assessment Procedures," Project Report to The Materials Properties Council, September, 1998
3. API RP-579 Recommend Practices for Fitness-for-Service, First Edition, January, 2000.
4. Structural Integrity Assessment Procedures for European Industry (SINTAP), November, 1999.
5. Dong, P. and Brust, F. W., "Welding Residual Stresses and Effects on Fracture in Pressure Vessel and Piping Components: A Millennium Review and Beyond," The Millennium Issue, ASME Transactions: Journal of Pressure Vessel Technology, Vol. 122, No. 3, August, pp. 329-328, 2000.
6. Dong, P., "Modeling of Weld Residual Stresses and Distortions: Advanced Computational Procedures and Practical Applications," Keynote Lecture - Proceedings of The Sixth International Conference on Residual Stresses (ICRS-6), Oxford, United Kingdom, July 10-12, 2000, pp 1223-1335.
7. Dong, P., Cao, Z., Hong, J.K., Brust, F.W, Bell, W., and McDonald, E.J., "Recent Progress in Analysis of Welding Residual Stresses," Welding Research Council, WRC Bulletin 455, September, 2000, Welding Research Council, Inc., New York, New York.
8. Dong, P., Hong, J.K., "Residential Stresses, Notch Stresses, and Stress Intensities at Welds: An Unified Assessment Procedures with Self-Consistency", Proceedings of 16th International Conference on Structural Mechanics in Reactor Technology (SMiRT 16), Washington, DC, August 12-17, 2001.
9. Buckthorpe, D. E. and Bestwick, R., "Treatment of Residual Stresses in Welds in Structural Integrity Assessments," Proceedings of 16th International Conference on Structural Mechanics in Reactor Technology (SMiRT 16), Washington, DC, August 12-17, 2001.
10. Dong, P. and Hong, J.K., "Consistent Treatment of Weld Residual Stresses in Fracture Assessment," Proceedings of ASME PVP Conference, Vancouver, Canada, Aug. 4-8, 2002.
11. Bradford, R., "Through-Thickness Distribution of Welding Residual Stresses in Austenitic Steel Cylindrical Butt Welds," Proceedings of Sixth International Conference on Residual Stresses (ICRS-6), Oxford, United Kingdom, July, 2000, pp. 1373-1381.
12. Bouchard, J. and Bradford, C., "Validated Axial Residual Stress Profiles for Fracture Assessment of Austenitic Stainless Steel Pipe Girth Welds," PVP Vol. 422: Fracture and Fitness, Proceedings of ASME PVP Conference, Atlanta, Georgia, U.S.A., July 22-26, 2001.
13. Dong, P., Osage, D., and Prager, M., "Development of Weld Residual Stress Distributions for Fitness for Service Assessment," ASME PVP-Vol. 411, Special Topics in Life Assessment, ASME PVP Conference, Seattle, Washington, July 23-27, 2000, pp. 53-64.
14. PVRC Joint Industry Project Proposal: "Weld Residual Stress Estimates for Fitness for Service and Recommended Procedures for Local PWHT," Final Revision, Nov. 20, 2000.
15. Brust, F. W., and Rybicki, E. F., "Computational Model of Backlay Welding for Controlling Residual Stresses in Welded Pipes", in Journal of Pressure Vessel Technology, Trans. ASME, Vol. 103, August, 1981, pp. 294-299.
16. Cao, Z., Brust, F.W., and Nanjundan, A., Dong, Y., Jutla, T., "A Comprehensive Thermal Solution Procedure for Different Weld Joints," Advances in Computational Engineering and Sciences, Vol. 1, 2000, pp. 629-636.
17. Cao, Z., Dong, P., and Brust, F., "A Fast Thermal Solution Procedure for Analyzing 3D Multi-Pass Welded Structures", Welding Research Council, WRC Bulletin 455, September, 2000, pp. 12-21.
18. Dong, P., 2001, "Residual Stress Analyses of a Multi-Pass Girth Weld: 3D Special Shell Versus Axisymmetric Models," ASME Journal of Pressure Vessel Technology, Vol. 123, No. 2, pp. 207-213.
19. Cao, Z.N. and Dong, P., "Modeling of GMA Weld Pools with Consideration of Droplet Impact," ASME Journal of Engineering Materials and Technology, Vol. 120, October, 1998.
20. Brust, F. W., Dong, P., Yang, Y., Zhang, J., Cao, Z., and Hong, J.K., "Weld Process Modeling and Its Importance in a Manufacturing Environment," SAE Technical Paper Series, #981510, 1998.
21. Goldak, J. Oddy, A., McDill, M., and House, R., "A New Finite Element Model for Welding Heat Sources," Metallurgical Transactions, Vol. 15B(6), 1984, pp. 587-600.
22. Dong, P., J.K. Hong, and Tsai, C.L., "Finite Element Simulation of Residual Stresses in Multi-Pass Welds", Proceedings of International Conference on Modeling and Control of Joining Processes, December 8-10, 1993, Orlando, Florida, pp. 470-476.
23. Dong, P., Zhang, J., and Li, M.V., "Computational Modeling of Weld Residual Stresses and Distortions - An Integrated Framework and Industrial Applications", ASME Pressure Vessel and Piping Conference Proceedings, PVP-Vol. 373, Fatigue, Fracture, and Residual Stresses, pp. 311-335, 1998.
24. Leggatt, R.H. and Stacey, A., "Calculation of Stress Intensity Factors Corresponding to Standard Residual Stress Profiles for Common Weld Joint Geometries," ASME PVP-Vol. 410-1, 2000, pp. 65-78.
25. Zhang, J., Dong, P., Hong, J.K., Bell, W., McDonald, E.J., "Analytical and Experimental Study of Residual Stresses in A Multi-Pass Repair Weld", ASME PVP-Vol. 410-1 Assessment Methodologies for Preventing Failure: Deterministic and Probablistic Aspects and Weld Residual Stress, The 2000 ASM PVP Conference, Seattle, Washington, July 23-27, 2000, pp. 53-64.
26. Leblond, J.B., Mottet, G., Devaux, J.C., "A Theorectical and Numerical Approach to the Plastic Behavior of Steels During Phase Transformation, I&II", Journal of the Mechanics and Physics of Solids, Vol. 34, No. 4, pp. 411-432
27. Ohta, A., Suzuki, N., and Maeda, Y., "Doubled Fatigue Sstrength of Box Welds by Using Low Transformation Temperature Welding Materials," International Institute of Welding (IIW) Document: IIW Doc. XIII-1825-2000, July, 2000.
28. Koppenhoefer, K and Gordon, R., "IIW X-XV RSDP Residual Stress Round-Robin Results - Phase 1", Presentation at IIW 2000 Annual Assembly, Florence, Italy, IIW-X-XV-RSDP-50-2000.
29. Hong J.K. and Dong, P., "Battelle's Results and Comments on IIW X-XV RSDP Round-Robin Problem Definition and Results," Presented at IIW X/XV Intermediate Meeting, Miami, Fl., January 27, 2000.
30. Dong, P. and Hong, J.K., "Assessment of IIW X-XV RSDP Round Robin Phase 1 Residual Stress Results," to appear in Welding in the World, 2002.
31. Dong, P., Ghadiali, N., and Brust, F.W., "Residual Stress Analysis of A Multi-Pass Girth Weld," ASME Pressure Vessel and Piping Conference Proceedings, PVP-Vol. 373, Fatigue, Fracture, and Residual Stresses, pp. 421-431, 1998.
32. Zhang, J., Dong, P., Brust, F., Shack, J.S., Mayfield, M.E., and McNeil, M., "Modeling of Weld Residual Stresses in Core Shroud Structures," Nuclear Engineering and Design, 195, pp. 171-187, 1999.
33. Bouchard, P.J., Holt, P., and Smith, D.J., "Prediction and Measurement of Residual Stresses in a Thick Section Stainless Steel Weld," Approximate Methods in the Design and Analysis, ASME PVP-Vol. 347, 1997, pp. 77-82.
34. Zhang, J., Dong, P., and Bouchard, P.J., "Effects of Repair Weld Length on Residual Stress Distribution," ASME PVP-Vol. 410-1 Assessment Methodologies for Preventing Failure: Deterministic and Probablistic Aspects and Weld Residual Stress, The 2000 ASM PVP Conference, Seattle, Washington, July 23-27, 2000, pp. 43-52.
35. Bate, S.K., Bouchard, P. J., et al. "Measurement and Modeling of Residual Stresses in Thick-Section Type 316 Stainless Steel Welds," Proceedings of Sixth International Conference on Residual Stresses (ICRS-6), Oxford, United Kingdom, July, 2000, pp. 1511-1518.
36. Dong, P., "Residual Stress Analyses of a Multi-Pass Girth Weld: 3D Special Shell Versus Axisymmetric Models," ASME Journal of Pressure Vessel Technology, Vol. 123, No. 2, pp. 207-213.
37. Bouchard, J., British Energy Internal Report: Weld C Residual Stress Measurements, British Energy, 1998.
38. Zhang, J., Dong, P., and Brust, F.W., "A 3-D Composite Shell Element Model for Residual Stress Analysis of Multi-Pass Welds," Transactions of the 14th International Conference on Structural Mechanics in Reactor Technology (SMiRT 14), Lyon, France, Vol. 1, pp. 335-344, 1997.
39. Dong, P., Hong, J.K., and Rogers, P., "Analysis of Residual Stresses in Al-Li Repair Welds and Mitigation Techniques," Welding Journal Research Supplement, Vol. 77, No. 11, November, 1998.
40. Dong, P., Hong, J. K., Zhang, J., Rogers, P., Bynum, J., and Shah, S., "Effects of Repair Weld Residual Stresses on Wide-Panel Specimens Loaded in Tension", ASME Journal of Pressure Vessel Technology Vol. 120, No. 2, 1998, pp 122-128.
41. Edwards L. Bruno, G. Dutta, M., Bouchard, P. J., Abbott, K. L., Peng, R. L., "Validation of Residual Stress Predictions for a 19mm thick J-Preparation Stainless Steel Pipe Girth Weld using Neutron Diffraction," Proc. Sixth Int. Conf. on Residual Stresses (ICRS6), (July 2000, Oxford, UK), pp. 1519-1526, 2000.
42. Smith, D.J. and Bonner, N.W., "Measurement of Residual Stresses Using the Deep Hole Method," PVP-Vol. 327, Residual Stresses in Design, Fabrication, Assessment and Repair, ASME PVP Conference, Montreal, July, 1996, pp. 53-65.
43. Janosch, J. and Lawrjaniec, D., "Study of the Material Properties of Thin Pipe Butt Welds (C-Mn and Stainless Steel) on the Welding Residual Stress Distribution by Using Numerical Simulation," ASME PVP-Vol. 393, Fracture, Fatigue and Weld Residual Stress, 1999, pp. 215-224.
44. Josefson, B.L. and Karlsson, C.T., "FE-Calculated Stresses in Multi-Pass Butt-Welded Pipe - A Simplified Approach," International Journal of Pressure Vessels and Piping, Vol. 38, pp. 227-243, 1989.
45. Brust, F.W., Dong, P., Yang, Y., Zhang, J., Cao, Z., and Hong, J.K., "Weld Process Modeling and Its Importance in a Manufacturing Environment," SAE Technical Paper Series, #981510, 1998.
46. Yang, Y., Zhang, J., Cao, Z., Dong, Y., Nanjundan, A., Ilhan, V., Jutla, T., and Brust, F. W., "Weld Modeling Procedure Development for Lap Joints", Advances in Computational Engineering and Sciences, Vol. 1, 2000, pp. 708-714.
47. Michaleris, P., "Residual Stress Distributions for Multi-Pass Welds in Pressure Vessel and Piping Components," ASME PVP-Vol. 327, Residual Stresses in Design, Fabrication, Assessment and Repair, 1996, pp. 17-28.
48. Hong, J.K., Tsai, C.-L., and Dong, P., "Assessment of Numerical Procedures for Residual Stress Analysis of Multi-Pass Welds," Welding Journal Research Supplement, Vol. 77, No. 9, 1998, pp. 372s-382s.
49. U.S. Department of Commerce Advanced Technology Program (ATP) on Fabrication of Advanced Structures Using Synergistic and Intelligent Processing (FASIP), 1996-1999 (Primary Contractor: Caterpillar Technical Center).
50. Zhang, J. Dong, P., Hong, J.K., Bell, W., McDonald, E.J., "Analytical and Experimental Study of Residual Stresses in A Multi-Pass Repair Weld", ASME PVP-Vol. 410-1 Assessment Methodologies for Preventing Failure: Deterministic and Probablistic Aspects and Weld Residual Stress, The 2000 ASM PVP Conference, Seattle, Washington, July 23-27, 2000, pp. 53-64.
51. Zhang, J., Dong, P., and Hong, J.K., "Management of Residual Stresses for an SXA Boiler Shell Repair," Battelle Report No. N100021-01, November, 1997.
52. Dong, P., Zhang, J., Hong, J.K., Bell, W., McDonald, E.J., "Finite Element and Experimental Studies of Residual Stresses in A Multi-Pass Repair Weld," Welding Research Council, WRC Bulletin 455, September, 2000, Welding Research Council, Inc., pp. 22-28.
53. Anderson, T.L., MPC FFS Project software on stress intensity factor solutions, 1998-2000.
54. Dong, P., "A Structural Stress Definition and Numerical Implementation for Fatigue Analysis of Welded Joints," International Journal of Fatigue, Vol. 23/10, 2000, pp. 865-876.
55. Dong, P., Hong, J.K., Cao, Z., "A Mesh-Insensitive Structural Stress Procedure for Fatigue Evaluation of Welded Structures", International Institute of Welding, IIW Doc. XIII-1902-01/XV-1089-01, July, 2000.
56. Dong, P. Hong, J., Cao, Z., "Structural Stress Based Master S-N Curve for Welded Joints," International Institute of Welding, IIW Doc. XIII-1930-02/XV-1119-02, June, 2002.
57. Dong, P. Hong, J., Osage, D., and Prager, M., "Fatigue of Pressure Vessel and Pipe Welds: ASME's FSRF rules revisited," submitted for publication in ASME Journal of Pressure Vessel Technology, 2002
58. Tada, H., Paris, P., and Irwin, G., The Stress Analysis of Cracks Handbook, 2nd ed., Paris Productions Incorporated, St. Louis, Missouri, 1985.
59. Anderson, T.L., Comments at MPC FFS Meeting, August, 2001.
60. Wang, X. and Lambert, S.B., "Semi-Elliptical Cracks in Finite-Thickness Plates with Built-In Ends, I. Stress Intensity Factor Solutions," Engineering Fracture Mechanics, 68, (2001) pp. 1723-1741.
61. Wang, X. and Lambert, S.B., "Semi-Elliptical Cracks In Finite - Thickness Plates With Built-InEnds, II. Weight Function Solutions," Engineering Fracture Mechanics, 68, (2001) pp. 1743-1754.
62. Hong, J.K., "Study of Numerical Methodologies for Multi-Pass Welding Analysis" Ph.D. Thesis, The Ohio State University, Welding Engineering Department, Columbus, OH, 1996.
63. Prager, M., MPC Database, April, 2001.