An overview of progress in the study of fretting fatigue

Journal of Strain Analysis for Engineering Design

Volumn 37, Issue 6, 2002, Pages 591-601

  Hills, D A ^a   Mugadu, A ^a  

^a UNIVERSITY OF OXFORD   (United Kingdom)

Author keywords

Fretting fatigue; Plain fatigue

Indexed keywords

CRACK PROPAGATION; FINITE ELEMENT METHOD; FRICTION; NUCLEATION;

FRETTING FATIGUE;

FATIGUE OF MATERIALS;

EID: 0036864374     PISSN: 03093247     EISSN: None     Source Type: Journal    
DOI: 10.1243/030932402320950189     Document Type: Conference Paper

References (65)

1. Waterhouse, R.B. Fretting Corrosion, 1972 (Pergamon Press, USA.
2. Cattaneo, C. Sul contatto di due corpi elastici: distribuzion local degli sforzi. Reconditi dell Accademia nazionale dei Lincei, 1938, 27, 342-248, 434-436, 474-478.
3. Mindlin, R.D. Compliance of elastic bodies in contact. Appl. Mechanics, 1949, 16, 259-268.
4. Johnson, K.L. Surface interaction between elastically loaded bodies under tangential forces. Proc. R. Soc., Ser. A, 1955, 230, 531-548.
5. Bramhall, R. Studies in fretting fatigue. DPhil thesis, University of Oxford, 1973.
6. Hills, D.A. and Nowell, D. The development of a fretting fatigue experiment with well-defined characteristics. In Standardization of Fretting Fatigue Test Methods and Equipment (Eds M. Hellmi Attia and R.B. Waterhouse), ASTM STP 1159, 1992, pp. 69-84 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
7. Hills, D.A. Mechanics of fretting fatigue. Wear, 1994, 175, 107-113.
8. Hills, D.A. and Nowell, D. Mechanics of fretting fatigue. Int. J. Mech. Sci., 1987, 29(5), 355-365.
9. Jäger, J. Elastic impact with friction. PhD thesis, Technical University of Delft, 1992.
10. Jäger, J. A new principle in contact mechanics. Trans. ASME, J. Tribology, 1998, 120(4), 677-684.
11. Ciavarella, M. The generalised Cattaneo partial slip plane contact problem. Part I: theory, Part II: examples. Int. J. Solids Structs, 1998, 35, 2349-2378.
12. Ciavarella, M., Hills, D.A. and Monno, G. The influence of rounded edges on indentation by a flat punch. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1998, 212(C4), 319-328.
13. Hills, D.A. and Urriolagoitia-Sosa, G. Origins of partial slip in fretting-a review of known and potential solutions. J. Strain Analysis, 1999, 34(3), 175-181.
14. Navarro, C., Mugadu, A., Hills, D.A. and Dominguez, J. The influence of underlying tension on stabilising partial slip in complete and nearly complete contacts. Int. J. Mech. Sci., 2002 (under review).
15. Nowell, D. and Dai, D.N. Analysis of surface tractions in complex fretting fatigue cycles using quadratic programming. Trans. ASME, J. Tribology, 1998, 120(4), 744-749.
16. Kim, H.-K., Hills, D.A. and Nowell, D. Partial slip between contacting cylinders under transverse and axial shear. Int. J. Mech. Sci., 2000, 42, 199-212.
17. Sackfield, A., Truman, C.E. and Hills, D.A. The tilted punch under normal and shear load (with application to fretting fatigue). Int. J. Mech. Sci., 2001, 43, 1881-1892.
18. Mugadu, A. and Hills, D.A. A shrink-fitted peg subjected to cyclic loading. J. Mech. Engng Sci., 2000, 713-725.
19. Urriolagoitia-Sosa, G. and Hills, D.A. A shrink-fit peg in a hole subject to bending: unloading, reloading and frictional shakedown. J. Strain Analysis, 2000, 35(5), 317-325.
20. Sackfield, A., Barber, J., Hills, D.A. and Truman, C.E. A shrink fit shaft subject to tension. European J. Mechanics, Part A, Solids (in press).
21. Endo, K., Goto, H. and Fukunaga, T. Frictional force in fretting fatigue. Bull. Jap. Soc. Mech. Engrs, 1974, 17(108), 647-654.
22. Milestone, W.D. and Janeczko, J.J. Friction between steel surfaces during fretting. Wear, 1981, 18, 219-240.
23. Kitagawa, H. and Takahashi, S. Applicability of fracture mechanics to very small cracks or cracks in the early stage. In Proceedings of 2nd International Conference on Mechanical Behaviour of Materials, 1976, pp. 627-631 (ASM).
24. Miller, K.J. The three thresholds for fatigue crack propagation. In Fatigue and Fracture Mechanics (Eds R.S. Piascik, J.C. Newman and N.E. Dowling), ASTM STP 1296, 1997, Vol. 27, pp. 267-286 (American Society for Testing and Materials, West Conshohocken, Pennsylvania).
25. Araújo, J.A. and Nowell, D. Analysis of pad size effects in fretting fatigue using short crack arrest methodologies. Int. J. Fatigue, 1999, 21, 947-956.
26. Nowell, D. and Hills, D.A. Crack initiation criteria in fretting fatigue. Wear, 1990, 136, 329-343.
27. Smith, R.N., Watson, P. and Topper, T.H. A stress strain function for the fatigue of metals. J. Mater., 1970, 5(4), 767-778.
28. Fatemi, A. and Socie, D. A critical plane approach to multiaxial fatigue damage including out of phase loading. Fatigue and Fract. of Engng Mater. Structs, 1998, 11(3), 145-165.
29. Dang Van, K., Griveau, B. and Message, O. On a new multi-axial fatigue limit criterion: theory and application. In Biaxial and Multiaxial Fatigue (Eds M.W. Brown and K.J. Miller), 1989 (Mechanical Engineering Publications, London).
30. Mura, T. Theory of fatigue-crack initiation. Mater. Sci. Engng, A, 1994, 176(1-2), 61-70.
31. Ruiz, C. and Chen, K.C. Life assessment of dovetail joints between blades and discs in aero-engines. I MechE Conference Publications, 1986, 1, 187-194.
32. Neu, R.W., Pape, J.A. and Swalla-Michaud, D.R. Methodologies for linking nucleation and propagation approaches for predicting life under fretting fatigue. In Fretting Fatigue: Current Technology and Practices (Eds D.W. Hoeppner, V. Chanrasekaran and C.B. Elliot), ASTM STP 1367, 1999 (American Society for Testing and Materials, West Conshohocken, Pennsylvania).
33. Swalla-Michaud, D.R., Pape, J.A. and Neu, R.W. Characterisation of a fretting fatigue process volume. Presented at the 3rd International Symposium on Fretting Fatigue, Nagaoka, Japan, May 2001.
34. Araújo, J.A. and Nowell, D. Prediction of fretting fatigue life using averaged multiaxial initiation parameters. Modern Practice in Stress and Vibration Analysis, 2001, 223-234.
35. Szolwinski, M.P. and Farris, T.N. Mechanics of fretting fatigue crack formation. Wear, 1996, 198, 93-107.
36. Ciavarella, M., Dini, D. and Demelio, G.P. A critical assessment of damage parameters for fretting fatigue. Presented at the 3rd International Symposium on Fretting Fatigue, Nagaoka, Japan, May 2001.
37. Wright, G.P. Studies in fretting fatigue. DPhil thesis, University of Oxford, 1970.
38. Lau, M.G. A study of damping capacity and stress distribution in a shrink-fitted assembly subjected to cyclic torque. DPhil thesis, University of Oxford, 1972.
39. O'Connor, J.J. and Hills, D.A. A fracture mechanics correlation of fretting fatigue experiments, mechanisms and surface distress. In Proceedings of 12th Leeds-Lyon Symposium on Tribology (Ed. D. Dowson), 1986 (Butterworths).
40. Hills, D.A., Nowell, D. and O'Connor, J.J. On the mechanics of fretting fatigue. Wear, 1988, 125, 129-146.
41. Hills, D.A. and Nowell, D. Mechanics of Fretting Fatigue, 1994 (Kluwer Academic Publishers, Dordrecht, The Netherlands).
42. Szolwinski, M.P. and Farris, T.N. Mechanics of fretting fatigue crack formation. Wear, 1996, 198, 93-107.
43. Wittkowsky, B.U., Birch, P.R., Dominguez, J. and Suresh, S. An apparatus for quantitative fretting-fatigue testing. Fatigue and Fracture of Engng Mater. Structs, 1999, 22, 307-320.
44. Mugadu, A., Hills, D.A. and Nowell, D. Modifications to a fretting fatigue testing apparatus based upon an analysis of contact stresses at complete and nearly complete contacts. Wear, 2002, 252, 475-483.
45. Leen, S.B., Richardson, I.J., McColl, I.R., Williams, E.J. and Hyde, T.R. Macroscopic fretting variables in a splined coupling under combined torque and axial load. J. Strain Analysis, 2001, 36(5), 481-498.
46. Nowell, D. Advances in the understanding of fretting fatigue with reference to gas turbine engines. In Progress in Structural Mechanics (Eds J. Morton and F. Paris), 2000, pp. 61-72 (University of Seville).
47. Hyde, T.R., et al.
48. Mugadu, A., Hills, D.A. and Limmer, L. An asymptotic approach to crack initiation in fretting fatigue of complete contacts. J. Mech. Phys. of Solids, 2002, 50, 531-547.
49. Mugadu, A. and Hills, D.A. A generalized stress intensity approach to characterising the process zone in complete fretting contacts. Int. J. Solids Structs, 2002, 39, 1327-1335.
50. Navarro, C., Hills, D.A. and Dominguez, J. The effect of corner radius on an asymptotic solution to the fretting of complete contacts. Fatigue and Fract. of Engng Mater. Structs, 2002 (under review).
51. Sackfield, A., Mugadu, A. and Hills, D.A. The influence of an edge radius on the local stress field at the edge of a complete fretting contact. Int. J. Solids Structs, 2002 (accepted).
52. Tur, M., Fuenmayor, J., Mugadu, A. and Hills, D.A. On the analysis of singular stress fields. Part 2: finite element formulation and application to frictional contacts. J. Strain Analysis, 2002 (under review).
53. Lin, K.Y. and Tong, P. Singular finite elements for the fracture analysis of V-notched plate. Int. J. Numer. Meth. Engng, 1980, 15, 1343-1354.
54. Nishioka, K., Nishimura, S. and Hirakawa, K. Fundamental investigation of fretting fatigue-Part 1. On the relative slip amplitude of press-fitted assemblies. Bull. Jap. Soc. Mech. Engrs, 1968, 11, 437-445.
55. Nishioka, K. and Hirakawa, K. Fundamental investigation of fretting fatigue-Part 5. The effect of relative slip amplitude. Bull. Jap. Soc. Mech. Engrs, 1969, 12, 692-697.
56. Brown, M.W. and Fernando, U.S. Fretting fatigue behaviour of BS L65 aluminium copper alloy under variable normal load. ESIS Publication, 1994, 18.
57. Mugadu, A. and Hills, D.A. Characterising the process zone in complete fretting contacts using plain fatigue sharp V-notch specimens. J. Mech. Phys. Solids, 2002, 50, 1417-1429.
58. Tur, M., Fuenmayor, J., Mugadu, A. and Hills, D.A. On the analysis of singular stress fields. Part 1: finite element formulation and application to notches. J. Strain Analysis, 2002, 37(5), 437-444.
59. Dobromirski, J. Variables of fretting process: are there 50 of them? In Standardization of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159, 1993, pp. 60-66 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
60. Goracheva, I.G., Rajeev, P.T., Murthy, H. and Farris, T.N. Wear in partial slip contacts. Presented at 36th Annual Technology Meeting of Society of Engineering Science, Austin, Texas, 25-27 October 1999, Abstract MC1-1.
61. Hills, D.A. and Fellows, L. Some observations on contact problems involving fretting in the presence of wear. Wear, 1999, 231, 319-324.
62. Hills, D.A. and Barber, J.R. Steady sliding of circular cylinder over a dissimilar thermally conducting half-plane. Int. J. Mech. Sci., 1986, 28(9), 613-622.
63. Pauk, V.J. and Yevtushenko, A.A. Frictional heating in sliding contact of two thermoelastic bodies. Int. J. Solids Structs, 1997, 34(12), 1505-1516.
64. Attia, M.H. On the standardization of fretting fatigue test method-modelling issues related to the thermal constriction phenomenon and prediction of contact temperature. In Fretting Fatigue: Current Technology and Practices (Eds D.W. Hoeppner, V. Chandrasekaran and C.B. Elliott), ASTM STP 1367, 2000 (American Society for Testing and Materials, West Conshohocken, Pennsylvania).
65. Ciavarella, M. and Hills, D.A. Brief note: some observations on oscillating tangential force and wear in general plane contacts. European J. Mechanics, Part A, Solids, 1999, 18(3), 491-497.