Short-term creep tests on phenol-resorcinol-formaldehyde (PRF) resin undergoing moisture content changes

Wood and Fiber Science

Volumn 34, Issue 4, 2002, Pages 612-624

  Muszyński, Lech ^a   Wang, Fenghu ^a   Shaler, Stephen M ^a  

^a UNIVERSITY OF MAINE   (United States)

Author keywords

Adhesive; Creep; Mechano sorption; Phenol resorcinol formaldehyde (PRF); Resin

Indexed keywords

ADHESIVES; ATMOSPHERIC HUMIDITY; CREEP; MOISTURE; RESINS; STRESSES; TEMPERATURE;

MECHANO-SORPTION; PHENOL-RESORCINOL-FORMALDEHYDE;

FORMALDEHYDE;

ADHESIVES; CREEP TESTS; FORMALDEHYDE; HUMIDITY; MOISTURE CONTENT; TEMPERATURE;

EID: 0036809796     PISSN: 07356161     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (25)

1. Bolton, A. J., and M. A. Irle. 1987. Physical aspects of wood adhesive bond formation with formaldehyde based adhesives. Part I. The effect of curing conditions on the physical properties of urea formaldehyde films. Holzforschung 41(3):155-158.
2. Bruck, H. A., S. R. McNeill, M. A. Sutton, and W. H. Peters, III. 1989. Digital image correlation using Newton-Raphson method of partial differential correction. Exp. Mech. 28(3):261-267.
3. Choi, D., J. L. Thorpe, and R. B. Hanna. 1991. Image analysis to measure strain in wood and paper. Wood Sci. Technol. 25(2):251-262.
4. Choi, S., and S. P. Shah. 1997. Measurement of deformations on concrete subjected to compression using image correlation. Exp. Mech. 37(3):307-313.
5. Dinwoodie, J. M. 1983, Properties and performance of wood adhesives. Pages 1-57 in a. Pizzi, ed. Wood adhesives. Chemistry and technology. Marcel Decker Inc., New York and Basel.
6. Gardner, D. J., J. F. Davalos, and U. M. Munipalle. 1994. Adhesive bonding of pultruded fiber reinforced plastic to wood. Forest Prod. J. 44(5):62-66.
7. Grossman, P. U. A. 1976. Requirements for a model that exhibits mechano-sorptive behavior. Wood Sci. Technol. 10:163-168.
8. Hisada, T. 1986. Creep and set behaviour of wood related to kiln drying. (in Japanese). Bull. Forestry and Forest Products Res. Inst. (335) Ibaraki, Japan: 31-130.
9. Irele, M. A., and A.vJ. Bolton. 1988. Physical aspects of wood adhesive bond formation with formaldehyde based adhesives. Part II. Binder physical properties and particleboard durability. Holzforschung 42(1):69-73.
10. ____, and ____. 1991. Physical aspects of wood adhesive bond formation with formaldehyde based adhesives. Part III. The creep behavior of formaldehyde based resins at different relative humidities. Holzforschung 45(1):69-73.
11. Lopez-Anido, R., D. J. Gardner, and J. L. Hensley. 2000. Adhesive bonding of eastern hemlock glulam panels with E-glass/vinyl ester reinforcement. Forest Prod. J. 50(11/12):43-47.
12. Marra, A. A. 1992, Technology of wood bonding. Principles in practice. Van Nostrand Reinhold, New York, NY.
13. Mott, L., S. M. Shaler, and L. H. Groom. 1996. A novel technique to measure strain distributions in single wood fibers. Wood Fiber Sci. 28(4):429-437.
14. Muszyński, L., and P. Olejniczak. 1996. A simple experimental method to determine some basic parameters for mechano-sorptive creep model for wood. Pages 479-783 in 5th International Wood Drying Conference, July 13-17, 1996. Quebec, Canada.
15. ____, and S. Bak. 1998. Determination of the mechano-sorptive characteristics of wood by means of a simple experimental method. Pages 149-152 in S. Kurjatko and J. Kudela, eds. Wood structure and properties '98. Proc. 3rd International Symposium on Wood Structure and Properties, August 25-27, 1998. Zvolen, Slovakia.
16. ____, R. Lopez-Anido, and S. M. Shaler. 2000. Image correlation analysis applied to measurement of shear strains in laminated composites. Pages 163-166 in Proc. SEM IX International Congress on Experimental Mechanics, June 5-7, 2000. Orando FL.
17. Pizzi, A. 1983. Phenolic resin wood adhesives. in A. Pizzi, ed. Wood adhesives. Chemistry and technology. Marcel Decker Inc., New York and Basel.
18. Ranson, W. F., M. A. Sutton, and W. H. Peters. 1987. Holographic and specle interferometry. Pages 388-429 in A. S. Kobayashi, ed. SEM handbook of experimental mechanics. Prentice-Hall, Inc., New Jersey.
19. Ranta-Maunus, A. 1975. The viscoelasticity of wood at varying moisture content. Wood Sci. Technol. 9:189-205.
20. Rijdijk, J. F. and P. B. Laming. 1994. Physical and related properties of 145 timbers. Information for practice. Kluwer Academic Publishers. Dordrecht, Boston, London.
21. Rybarczyk, W. 1973. Study on the development of mathematical model of mechanical properties of some wood materials undergoing changes in the moisture content. (in Polish). Prace Instytutu Technologii Drewna. 66(2):17-138.
22. Sutton, M. A., and Y. J. Chao. 1988. Measurement of strains in a paper tensile specimen using computer vision and digital image correlation. TAPPI Journal, 71(3):173-175.
23. ____, J. L. Turner, H. A. Bruck, and A. E. Chae. 1991. Full-field representation of discretely sampled surface deformation for displacement and strain analysis. Exp. Mech. 31(2):168-177.
24. Vendroux, G., and W. G. Knauss. 1998. Submicron deformation field measurements: Part 2. Improved digital image correlation. Exp. Mech. 38(2):86-92.
25. Wu, Q., and M. R. Milota. 1996. Mechano-sorptive deformation of douglas-fir specimens under tangential tensile stress during moisture adsorption. Wood Fiber Sci. 28(1):128-132.