Laser repetitive pulse heating of steel surface: A material response to thermal loading

Journal of Manufacturing Science and Engineering

Volumn 124, Issue 3, 2002, Pages 595-604

  Shuja, S Z ^a   Arif, A F M ^a   Yilbas, B S ^a  

^a KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

Author keywords

[No Author keywords available]

Indexed keywords

FINITE ELEMENT METHOD; HEAT TRANSFER; HEATING; LASER BEAM EFFECTS; LASER PULSES; REYNOLDS NUMBER; STEEL; STRESS ANALYSIS; THERMAL LOAD; TURBULENCE;

GAS JET IMPINGING; LASER REPETITIVE PULSE HEATING;

SURFACE TREATMENT;

EID: 0036700157     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1463033     Document Type: Article

References (34)

1. Ready J.F.. 1965, "Effects due to Absorption of Laser Radiation," J. Appl. Phys., 36, pp. 462-470.
2. Schultz, W., Becher, D., Frank, J., Kennerling, K., and Herziger, G., 1993, "Heat Conduction Losses in Laser Cutting of Metals," J. Phys. D, 26, pp. 1357-1363.
3. O'Neill, W., and Steen, W.M., 1995, "A Three Dimensional Analysis of Gas Entrainment Operating During the Laser Cutting Process," J. Phys. D, 28, pp. 12-18.
4. Archombault, P., and Azim, A., 1995, "Inverse Solution of the Heat-Transfer Equation: Application to Steel and Aluminum Alloy Quenching," J. Mater. Eng. Perform., 4, pp. 730-736.
5. Ji, Z., and Wu, S., 1998, "FEM Simulation of the Temperature Field During the Laser Forming of Sheet Metal," J. Mater. Process. Technol., 74, pp. 89-95.
6. Yilbas, B.S., 1996, "Analytical Solution for Time Unsteady Laser Pulse Heating of Semi-infinite Solid," Int. J. Mech. Sci., 30, pp. 671-682.
7. Diniz Neto, O., and Lima, C.A.J., 1994, "Non-Linear Three Dimensional Temperature Profiles in Pulsed Laser Heated Solids," J. Phys. D, 27, pp. 1795-1804.
8. Simon, G., Gratzke, U., and Kroos, J., 1993, "Analysis of Heat Conduction in Deep Penetration Welding With a Time-Modulated Laser Pulse," J. Phys. D, 26, pp. 862-869.
9. Yilbas, B.S., and Shuja, S.Z., 1997, "Heat Transfer Analysis of Laser Heated Surfaces-Conduction Limited Case," Appl. Surf. Sci., 108, pp. 167-175.
10. Modest, M.F., and Aboikans, H., 1986, "Heat Conduction in a Moving Semiinfinite Solid Subjected to Pulsed Laser Irradiation" ASME J. Heat Transfer, 108, pp. 597-601.
11. Hoadley, A.F.A., Pappoz, M., and Zimmermann, M., 1991, "Heat-Flow Simulation of Laser Remelting With Experimental Validation," Metall. Trans. B, 22B, pp. 101-109.
12. Hecter, Jr., L.G., Kim, W.S., and Drisik, M.N., 1992, "Hyperbolic Heat Conduction due to a Mode Locked Laser Pulse Train," Int. J. Eng. Sci., 30, pp. 1731-1744.
13. Ashfort-Frost, S., and Jamburnathran, P., 1996, "Numerical Prediction of Senti-confined Jet Impingement and Comparisons With Experimental Data," Int. J. Numer. Methods Fluids, 23, pp. 295-306.
14. Ariel, P.D., 1993, "Stagnation Flow-A Free Boundary Value Problem Formulation," Int. J. Comput. Math., 49, pp. 123-131.
15. Abid, R., and Speziale, C.G., 1996, "The Free Stream Matching Condition for Stagnation Point Turbulent Flows: An Alternative Formulation," ASME J. Appl. Mech., 63, pp. 95-100.
16. Craft, T.S., Graham, L.J.W., and Launder, B.E., 1993, "Impinging Jet Studies for Turbulence Model Assessment-II. An Examination of the Performance of Few Turbulence Models," Int. J. Heat Mass Transf., 36, pp. 2685-2697.
17. Strahle, W.C., 1985, "Stagnation Point Flows With Ereestream Turbulence The Matching Condition," AIAA J., 23, pp. 1822-1824.
18. Shuja, S.Z., and Yilbas, B.S., 1998, "Gas-Assisted Repetitive Pulsed Heating of a Steel Surface," Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 212, pp. 741-757.
19. Shuja, S.Z., and Yilbas, B.S., 1998, "Pulsative Heating of Surfaces," Int. J. Heat Mass Transl., 41, pp. 3899-3918.
20. Chu, J.P., Rigsbee, J.M., Banons, G., and Elsayed-Ali, H.E., 1999, "Laser Shock Processing Effects on Surface Microstructure and Mechanical Properties of Low Carbon Steel," Mater. Sci. Eng., A, 260, pp. 260-268.
21. Hasselmom D.P.H., and Crandall, W.B., 1963, "Thermal Shock Analysis of Spherical Shapes-II," J. Am. Ceram. Soc., 49, pp. 434-437.
22. Wang, H.G., Guan, Y.H., Chen, T.L., and Zhang, J.T., 1997, "A Study of Thermal Stresses During Laser Quenching," J. Mater. Process. Technol., 63, pp. 550-553.
23. Modest, M.F., 1998, "Transient Elastic and Viscoelastic Thermal Stresses During Laser Drilling of Ceramics," ASME J. Heat Transfer, 120, pp. 892-898.
24. Dain, Y., Kapadia, P.D., and Dowden, J.M., 1999, "The Distortion Gap Width and Stresses in Laser Welding of Thin Elastic Plates," J. Phys. D, 32, pp. 168-175.
25. 25] Elperin, T., and Rudin, G., 1996, "Thermoelasticity Problem for a Multilayer Coating-Substrate Assembly Irradiated by a Laser Beam," Int. Commun. Heat Mass Transfer, 23, pp. 133-142.
26. Li, K., and Sheng, P., 1995, "Plane Stress Model for Fracture of Ceramics During Laser Cutting," Int. J. Mach. Tools Manuf., 35, pp. 1493-1506.
27. Yilbas, B.S., Sami, M., and Shuja, S.Z., 1998, "Laser-Induced Thermal Stresses on Steel Surface," Opt. Lasers Eng., 30, pp. 25-37.
28. Berocci, C., 1991, Introduction to the Modeling of Turbulence, Von Karman Inst for Fluid Dynamics, March.
29. Gotski, T.B., Hussaini, M.Y., and Lumley J.L., 1996, Simulation and Modeling of Turbulent Flows, Oxford Univ. Press, New York.
30. Elhaleim, O., Reggio, M., and Camatero, R., 1992, "Simulating Two-Dimensional Turbulent Flow by Using k-ε Model and the Vorticity-Stream Function Formulation," Int. J. Numer. Methods Fluids, 14, pp. 961-980.
31. Incropera, F.P., and Dewitt, D.P., 1985, Introduction to Heat Transfer, Appendix, John Wiley, New York, pp. 667-696.
32. Patankar, S.V., 1981, Computer Analysis of Fluid Flow and Heat Transfer, Ch.8, Pinridge, Swansea, pp. 223-252.
33. Shuja, S.Z., 1993, "Calculations of Fluid Flow and Heat Transfer in Expanding Ducts," MS Thesis, King Fahd Univ., Dhahran, Saudi Arabia.
34. Bathe, K.J., 1996, Finite Element Procedures, Ch.6, Prentice Hall, New Jer-sey, pp. 148-192.