Basis of the new criteria in ASME B31.8 for prioritization and repair of mechanical damage

Proceedings of the International Pipeline Conference, IPC

Volumn A, Issue , 2002, Pages 647-658

  Rosenfeld, M J ^a   Pepper, John W ^a   Leewis, Keith ^a  

^a Kiefner and Associates Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

WELDMENTS;

ACCIDENT PREVENTION; CORROSION; DEFORMATION; PIPELINE CODES; STRAIN; WELDS;

NATURAL GAS PIPELINES;

EID: 0036431214     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IPC2002-27122     Document Type: Conference Paper

References (56)

1. Belonos, S.P., and Ryan, R.S., "Dents in Pipe", The Oil and Gas Journal (November 17, 1958).
2. Eiber, R.J., and McClure, G., "Research on Conditions Affecting Crack Initiation in Line Pipe", Battelle Memorial Institute, Third Phase Report to A.G.A. NG-18 Committee (July 11, 1960).
3. McClure, G., Eiber, R.J., Hahn, G.T., Boulger, F.W., and Masubuchi, K., "Research on the Properties of Line Pipe", Battelle Memorial Institute, Summary Report to A.G.A. NG-18 Committee, 131 pp (May 1962).
4. th Symposium on Line Pipe Research, A.G.A. Pipeline Research Committee (November, 1969).
5. th Symposium on Line Pipe Research, A.G.A. Pipeline Research Committee (November, 1974).
6. Jeglic, F.S., "Impact Indentation of Pipeline Steel", CANMET, Physical Metallurgy Research Report ERP/PRML-75-1 (January 1975).
7. th Symposium on Line Pipe Research, A.G.A. Pipeline Research Committee (November 1979).
8. Johnson, W., Ghosh, S.K., Mamalis, T.Y., Reddy, T.Y., and Reid, S.R., "The Quasi-Static Piercing of Cylindrical Tubes or Shells", International Journal of Mechanical Science, 22 (1980).
9. Eiber, R.J., Maxey, W.A., Bert, C.W., and McGlure, G., "The Effects of Dents on the Failure Characteristics of Line Pipe", Battelle Report to A.G.A. Pipeline Research Committee, Catalog No. L51403, 38 pp (May 8, 1981).
10. Jones, D.J., "The Significance of Mechanical Damage in Pipelines", 3R International (July 1982).
11. Jones, D.G., and Hopkins, P., "The Influence of Mechanical Damage on Transmission Pipeline Integrity", International Gas Research Conference, London (June 1983).
12. th Biennial Joint Technical Meeting on Line Pipe (September, 1985).
13. Maxey, W.A., "Outside Force Defect Behavior", Battelle Report to A.G.A. Pipeline Research Committee, Catalog No. L51518 (August 15, 1986).
14. th Symposium on Line Pipe Research, A.G.A. Pipeline Research Committee (October, 1986).
15. th Biennial Joint Technical Meeting on Line Pipe Research, Calgary (August 1988).
16. Hopkins, P., and Clyne, A.J., "The Significance of Dents in Transmission Pipelines", Second Conference on Pipework, Engineering, and Operation; IMechE (February 1989).
17. th Biennial Joint Technical Meeting on Line Pipe Research, Paris (May 1991).
18. th Biennial Joint Technical Meeting on Line Pipe Research, Paris (May, 1991).
19. Hopkins, P., Corder, I., and Corbin, P., "The Resistance of Gas Transmission Pipelines to Mechanical Damage", International Conference on Pipeline Reliability, Calgary (June 1992).
20. Lancaster, E.R., and Palmer, S.C., "Model Testing of Mechanically Damaged Pipes Containing Combined Dents and Gouges", ASME Pressure Vessel and Piping Conference, New Orleans (June 1992).
21. th Joint Technical Meeting on Line Pipe Research, 12 pp (May 1993).
22. th Symposium on Line Pipe Research, (September 1993).
23. Fowler, J.R., Alexander, C.R., Kovach, R.J., and Connelly, L.M., "Cyclic Pressure Fatigue Life of Pipelines with Plain Dents, Dents with Gouges, and Dents with Welds", A.G.A. Catalog No. L51705 (June 1994).
24. Fowler, J.R., "Criteria for Dent Acceptability of Offshore Pipelines", Paper No. OTC 7311, Offshore Technology Conference, Houston, 13 pp (1993).
25. th Joint Technical Meeting on Line Pipe Research (May 1993).
26. th Joint Technical Meeting (April, 1995).
27. th International Offshore and Polar Engineering Conference, Osaka (April 1994).
28. th Joint Technical Meeting (April, 1995).
29. th Joint Technical Meeting (April 1995).
30. th Joint Technical Meeting (April 1995).
31. th Joint Technical Meeting (April, 1995).
32. Zarea, M.F., Toumbas, D.N., and Phlibat, C.C., "Numerical Models for Static Denting and Dynamic Puncture of Gas Transmission Linepipe and Their Validation", Proc. 1st International Pipeline Conference, Calgary (June 1996).
33. th Symposium on Line Pipe Research, Houston (September 1996).
34. th Joint Technical Meeting, Arlington (April 1997).
35. th Joint Technical Meeting, Arlington (April 1997).
36. th Joint Technical Meeting, Arlington (April 1997).
37. th Joint Technical Meeting, Arlington (April 1997).
38. th Joint Technical Meeting, Arlington (April 1997).
39. th Joint Technical Meeting, Arlington (April, 1997).
40. Keating, P.B., and Hoffman, R.L., "Fatigue Behavior of Dented Petroleum Pipelines-Task 4 USDOT RSPA", Contract No. DTRS56-95-C-0003 (May 1997).
41. Rosenfeld, M.J., "Toward an Acceptance Criterion for Shallow Dents Affecting Girth Welds in Gas Transmission Pipelines", PVP Vol. 353, ASME Pressure Vessel and Piping Conference, Orlando (July 1997).
42. Rosenfeld, M.J., "Development of a Model for Fatigue Rating Shallow Unrestrained Dents", A.G.A. Catalog No. L51741 (September 1997).
43. Alexander, C.R., and Kiefner, J.F., "Effects of Smooth and Rock Dents on Liquid Petroleum Pipelines", API Publication 1156 (November 1997).
44. Keating, P.B., Hoffman, R.L., and Vinjamuri, G., "Modeling Fatigue Behavior of Dents in Petroleum Pipelines", ASME/JSME Pressure Vessel and Piping Conference (1998).
45. Hart, J.D., Powell, G.H., Maple, J.A., Stevick, G.P., and Norton, J.D., "Fatigue Damage Calculations for a Dented and Ovalled Section of the Transalaska Pipeline System at Thompson Pass", Proc. International Pipeline Conference, Calgary (June 1998).
46. Hagawara, N., and Oguchi, N., "Fatigue Behavior of Line Pipes Subjected to Severe Mechanical Damage", Proc. International Pipeline Conference, Calgary (June 1998).
47. Rosenfeld, M.J., "Investigations of Dent Rerounding Behavior", Proc, International Pipeline Conference, Calgary (June 1998).
48. Rosenfeld, M.J., Porter, P.C., and Cox, J.C., "Strain Estimation Using VETCO Deformation Tool Data", Proc. International Pipeline Conference, Calgary (June 1998).
49. Bubenik, T.A., Nestleroth, J.B., Davis, R.J., Crouch, A., Udpa, S., and Afzal, M.A., "In-Line Inspection Technologies for Mechanical Damage and SCC in Pipelines-Final Report on Tasks 1 and 2", U.S. Department of Transportation, Office of Pipeline Safety, Lloyd Ulrich Contracting Officer and Technical Representative, Report No. DTRS56-96-C-0010 (1998).
50. Kiefner, J.F., and Alexander, C.R., "Repair of Dents Containing Minor Scratches", PRCI Catalog No. L51788 (March 1999).
51. Kiefner, J.F., and Alexander, C.R., "Effects of Smooth and Rock Dents on Liquid Petroleum Pipelines (Phase 2)", Addendum to API Publication 1156 (October 1999).
52. Rosenfeld, M.J., "Guidelines for the Assessment of Dents on Welds", PR-218-9822, PRCI, A.G.A. Catalog No. L51810 (December 22, 1999).
53. Kiefner, J.F., "Effects of Internally Scarred Dents on Pipeline Integrity", KAI report to a pipeline company (August 18, 2000).
54. Alexander, C.R. and Fowler, J.R., "Evaluation of a Composite System for Repair of Mechanical Damage in Gas Transmission Lines", GRI-97/0413, Prepared for the Gas Research Institute by Stress Engineering Services, Inc. (December 1998).
55. Anon., "Engineering Evaluation of Armor Plate™ Pipe Wrap Repair System", Armor Plate, Inc. (July 1999).
56. Rosenfeld, M.J., "Proposed New Guidelines for ASME B31.8 on Assessment of Dents and Mechanical Damage", GRI Topical Report No. GRI-01/0084 (May 2001).