The effect of transformation induced plasticity on the mechanical behavior of porous SMAs

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 4699, Issue , 2002, Pages 224-234

  Lagoudas, Dimitris C ^a   Entchev, Pavlin B ^a   Vandygriff, Eric L ^a  

^a Department of Electrical and Computer Engineering   (United States)

Author keywords

Micromechanics; Mori Tanaka; NiTi; Porous Shape Memory Alloy; Powder Metallurgy

Indexed keywords

COMPRESSION TESTING; COMPUTER SIMULATION; HOT ISOSTATIC PRESSING; MARTENSITIC TRANSFORMATIONS; PLASTICITY; POROSITY; POROUS MATERIALS; THERMOMECHANICAL TREATMENT;

PLASTIC STRAINS;

SHAPE MEMORY EFFECT;

EID: 0036029437     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.474979     Document Type: Conference Paper

References (31)

1. A.P. Jardine, J.M. Kudva, C. Martin, and K. Appa, "Shape memory alloy Ti-Ni actuators for twist control of smart wing designs," in SPIE Proceedings of Mathematics and Controls in Smart Structures, 2717, pp. 160-165, SPIE, (San Diego, CA), 1996.
2. C. Liang, F. Davidson, L.M. Schetky, and F.K. Straub, "Applications of torsional shape memory alloy actuators for active rotor blade control-opportunities and limitations," in SPIE Proceedings of Mathematics and Controls in Smart Structures, 2717, pp. 91-100, 1996.
3. L.N. Garner, L.J. Wilson, D.C. Lagoudas, and O.K. Rediniotis, "Development of a shape memory alloy actuated biomimetic vehicle," Smart Materials and Structures 9(5), pp. 673-683, 2000.
4. A. Ilyin, M. Dudin, and I. Makarova, "NiTi instruments for TMJ surgeries," in Superelastic Shape Memory Implants in Medicine, p. 61, 1995.
5. V. Brailovski and F. Trochu, "Review of shape memory alloys medical applications in Russia," Bio-Medical of Materials & Engineering 6(4), pp. 291-298, 1996.
6. V.E. Gyunter, P. Sysoliatin, and T. Temerkhamor, Superelastic Shape Memory Implants in Maxillofacial Surgery, Traumatology, Orthopedics, and Neurosurgery, Tomsk University Publishing House, Tomsk, 1995.
7. K.N. Melton, "General applications of SMA's and smart materials," in Shape Memory Alloys, K. Otsuka and C.M. Wayman, eds., ch. 10, pp. 220-239, Cambridge University Press, 1999.
8. I. Ohkata and Y. Suzuki, "The design of shape memory alloy actuators and their applications," in Shape Memory Alloys, K. Otsuka and C.M. Wayman, eds., ch. 11, pp. 240-266, Cambridge University Press, 1999.
9. S. Miyazaki, "Medical and dental applications of shape memory alloys," in Shape Memory Alloys, K. Otsuka and C.M. Wayman, eds., ch. 12, pp. 267-281, Cambridge University Press, 1999.
10. S.A. Shabalovskaya, V.I. Itin, and V.E. Gyunter, "Porous Ni-Ti - a new material for implants and prostheses," in Proceedings of the First International Conference on Shape Memory and Superelastic Technologies, pp. 7-12, SMST International Committee, 1994.
11. R.A. Ayers, S.J. Simske, T.A. Bateman, A. Petkus, R.L.C. Sachdeva, and V.E. Gyunter, "Effects of Nitinol implant porosity on cranial bone ingrowth and apposition after 6 weeks," J. Biomed. Mater. Res. 45(1), pp. 42-47, 1999.
12. S.J. Simske, R.A. Ayers, and T.A. Bateman, "Porous materials for bone engineering," in Porous Materials for Tissue Engineering, D.-M. Liu and V. Dixit, eds., Materials Science Forum 250, pp. 151-182, Transtech, 1997.
13. D.C. Lagoudas, P.B. Entchev, M.A. Qidwai, and V.G. DeGiorgi, "Micromechanics of porous shape memory alloys," in Proceedings of 2000 ASME International Mechanical Engineering Congress & Exposition, J. Redmont and J. Main, eds., pp. 41-50, 2000.
14. J.C. Hey and A.P. Jardine, "Shape memory TiNt synthesis from elemental powders," Material Science and Engineering A 188(1-2), pp. 291-300, 1994.
15. H.C. Yi and J.J. Moore, "The combustion synthesis of Ni-Ti shape memory alloys," JOM 42, pp. 31-35, 1990.
16. N.V. Goncharuk, I.F. Martynova, O.R. Naidenova, V.V. Skorokhod, S.M. Solonin, and G.R. Fridman, "Superelasticity and shape memory of sintered porous titanium nickelide," Poroshk. Metall. 4, pp. 56-60, 1992.
17. V.I. Itin, V.E. Gyunter, S.A. Shabalovskaya, and R.L.C. Sachdeva, "Mechanical properties and shape memory of porous Nitinol," Materials Characterization 32, pp. 179-187, 1994.
18. O.M. Shevchenko, G.V. Gavrilyuk, V.V. Kokorin, and V.A. Chernenko, "Obtaining Fe-Ni-Co-Ti alloys having a thermoelastic martensite transformation," Powder Metallurgy and Metal Ceramics 36(1-2), pp. 71-76, 1997.
19. B.-Y. Li, L.-J. Rong, and Y.-Y. Li, "Porous NiTi alloy prepared from elemental powder sintering," J. Mater. Res. 13, pp. 2847-2851, 1998.
20. th Annual Technical Conference, 2000.
21. K. Tangaraj, Y.-C. Chen, and K. Salama, "Fabrication of porous NiTi shape memory alloy by elemental powder sintering," in Proceedings of 2000 ASME International Mechanical Engineering Congress Exposition, J. Redmont and J. Main, eds., pp. 59-63, 2000.
22. M.A. Qidwai, P.B. Entchev, D.C. Lagoudas, and V.G. DeGiorgi, "Modeling of the thermomechanical behavior of porous shape memory alloys," International Journal of Solids and Structures 38, pp. 8653-8671, 2001.
23. th Annual Technical Conference, 2001.
24. P.B. Entchev and D.C. Lagoudas, "Modeling porous shape memory alloys using micromechanical averaging techniques," Mechanics of Materials 34(1), pp. 1-24, 2002.
25. D.C. Lagoudas, Z. Bo, and M.A. Qidwai, "A unified thermodynamic constitutive model for SMA and finite element analysis of active metal matrix composites," Mechanics of Composite Materials and Structures 3, pp. 153-179, 1996.
26. D.C. Lagoudas and E.L. Vandygriff, "Processing and characterization of NiTi porous SMA by elevated pressure sintering." Submitted to: Journal of Intelligent Material Systems and Structures, January 2002.
27. D. Wurzel, "Marforming and tempering of binary Ni-Ti alloys including precipitation effects," Material Science and Engineering A 273-275, pp. 634-638, 1999.
28. Z. Bo and D.C. Lagoudas, "Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part I: Theoretical derivations," International Journal of Engineering Science 37, pp. 1089-1140, 1999.
29. Z. Bo and D.C. Lagoudas, "Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part III: Evolution of plastic strains and two-way memory effect," International Journal of Engineering Science 37, pp. 1141-1173, 1999.
30. Z. Bo and D.C. Lagoudas, "Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part IV: Modeling of minor hysteresis loops," International Journal of Engineering Science 37, pp. 1174-1204, 1999.
31. D.C. Lagoudas and Z. Bo, "Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part II: Material characterization and experimental results for a stable transformation cycle," International Journal of Engineering Science 37, pp. 1205-1249, 1999.