Iron pipe corrosion in distribution systems

Journal / American Water Works Association

Volumn 93, Issue 7, 2001, Pages 88-100

  Mcneill, L S ^a   Edwards, M ^a  

^a UTAH STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CORROSION; PIPE; POTABLE WATER; REGULATORY COMPLIANCE; WATER QUALITY;

DRINKING WATER INDUSTRY; IRON PIPE CORROSION;

WATER DISTRIBUTION SYSTEMS;

EID: 0035392837     PISSN: 0003150X     EISSN: None     Source Type: Journal    
DOI: 10.1002/j.1551-8833.2001.tb09246.x     Document Type: Article

References (172)

1. The effect of phosphorus-based corrosion inhibitors and low disinfectant residuals on distribution biofilms
2. Surface complexation
3. The occurrence of microorganisms in water main encrustations
4. Control experiences at Durham, North Carolina
5. Corrosion control program in Danvers, Massachusetts
6. Tuberculation measurement as an index of corrosion and corrosion control
7. Cast-iron pipe coatings and corrosion
8. Silicates as aids to coagulation
9. Prevention of corrosion and "red water"
10. A pipe loop system for evaluating iron uptake in distribution systems
11. The coordination chemistry of weathering: IV. Inhibition of the dissolution of oxide minerals
12. Physicochemical characterization of corrosion layers formed on iron in a sodium carbonate-bicarbonate-containing environment
13. Potable water treatment and monitoring for corrosion and scale control
14. The reactivity of Fe(III) (hydr)oxides: Effects of ligands in inhibiting the dissolution
15. Silica polymerization and other factors in iron control by sodium silicate and sodium hypochlorite additions
16. The influence of trace organics on scale formation and corrosion
17. n- inhibitors
18. Competitive exclusion of sulfate reduction by Fe(III)-reducing bacteria: A mechanism for producing discrete zones of high-iron ground water
19. Buffer intensity: What is it and why it's critical for controlling distribution system water quality
20. Sodium hexametaphosphate as a corrosion inhibitor for Ottawa tap water
21. Dissolved-copper effect on iron pipe
22. Silicate as Fe, Mn deposition preventative in distribution systems
23. Preventing iron deposition with sodium silicate
24. USEPA's infrastructure needs survey
25. Sulphate-reducing bacteria associated with biocorrosion-A review
26. Reactivity of aquatic iron(III) oxyhydroxides - Implications for redox cycling of iron in natural waters
27. 3+ by a culture of thiobacillus ferrooxidans and the coefficient of efficiency of biosynthesis
28. Correlation of the two principal methods of calculating the three kinds of alkalinity
29. Desktop guidance for mitigating Pb and Cu corrosion by-products
30. Effects of pH and velocity on corrosion of steel water pipes
31. Corrosion by mixing water of different qualities
32. Initial investigation of microbially influenced corrosion in a low-temperature water distribution system
33. Soft, low-temperature water distribution corrosion: Yellowknife, N.W.T.
34. Scale protection criteria in natural waters
35. Microstructure and chemical composition of natural scale layers
36. Water quality and internal corrosion of iron pipes
37. Control of red water due to pipeline corrosion
38. Corrosion of cast iron in potable water service. Corrosion and related aspects of materials for potable water supplies
39. Thermodynamic equilibria in aqueous suspensions of synthetic and natural fe(II)-fe(III) green rusts: Occurrences of the mineral in hydromorphic soils
40. Reversion of molecularly dehydrated sodium phosphates
41. The effect of temperature, humidity, and silicon content on the oxidation of fine iron particles
42. Colored water - Red, black, or blue
43. Sulphate-reducing bacteria and anaerobic corrosion
44. Control of couples developed in water systems
45. Protective film formation with phosphate glasses
46. Corrosion control with threshold treatment
47. Threshold treatment of water systems - Corrosion control and scale prevention with glassy phosphate
48. Corrosion control with threshold treatment - Inhibition of the corrosion of iron and steel with hexametaphosphate
49. Surface-active properties of hexametaphosphate
50. The effect of small concentrations of hexametaphosphate on iron oxide surfaces
51. Protection of pipes against corrosion
52. Water quality and lead, copper, and iron corrosion in boulder water
53. The effect of changing inter process and final disinfection reagents on corrosion and biofilm growth in distribution pipes
54. Threshold treatment
55. Minimizing iron corrosion in lime softened water
56. Evaluating home plumbing corrosion problems
57. Polyphosphate for corrosion control in water distribution system
58. Water quality in distribution networks
59. 2 corrosion
60. Glassy phosphates in water treatment
61. Possible source of a phosphorus compound produced by sulfate-reducing bacteria that cause anaerobic corrosion of iron
62. Mechanism of anaerobic corrosion of steel by sulfate-reducing bacteria
63. An overview of the anaerobic corrosion of underground metallic structures, evidence for a new mechanism
64. Corrosion of iron and formation of iron phosphide by Desulfovibrio desulfuricans
65. Anaerobic corrosion by sulfate-reducing bacteria due to highly reactive volatile phosphorus compound
66. The role of phosphorus and hydrogen sulfide in the anaerobic corrosion of iron and the possible detection of this corrosion by an electrochemical noise technique
67. Composition depth profiles of potential-dependent orthophosphate film formation on iron using auger electron spectroscopy
68. How to reduce lead corrosion without increasing iron release in the distribution system
69. Use of bimetallic glassy phosphates for corrosion control
70. 3+ ions in the oxidation of ferrous iron by Thiobacillus ferrooxidans at various temperatures
71. Investigations of the reduction and reoxidation kinetics of iron(III) oxide scales formed in waters
72. Mechanism of corrosion inhibition by sodium metaphosphate glass
73. Chemical equilibria in water treatment
74. The analytical control of anti-corrosion water treatment
75. Chemical control of corrosion
76. Loss in pipeline carrying capacity due to corrosion and tuberculation
77. Evaluation of the use of polyphosphates in the water industry
78. Bacteria, corrosion, and red water
79. Laboratory studies relating mineral quality of water to corrosion of steel and cast iron
80. Current research on corrosion and tuberculation of cast iron
81. Corrosion and tuberculation of cast iron
82. Loss in water main carrying capacity
83. Examining the relationship between iron corrosion and the disinfection of biofilm bacteria
84. Biologically mediated corrosion and its effects on water quality in distribution systems
85. Dissolution kinetics of minerals in the presence of sorbing and complexing ligands
86. Importance of water composition for prevention of internal copper and iron corrosion
87. The effect of water chemistry on the properties of iron particles and iron suspensions
88. Greater Vancouver water district drinking water corrosion inhibitor testing
89. Evaluating corrosion control strategies for a pilot-scale distribution system
90. Central Avra valley storage & recovery project, task 6: Water quality management program
91. Use of polyphosphates for developing protective calcite coatings
92. Calcite coating protects water pipes
93. Crystal structure of green rust formed by corrosion of cast iron
94. Phosphate inhibitors and red water in stagnant pipes
95. 3 films
96. 3 films: Part 3, A practical approach for plant operators
97. 3 films: Part 2, A practical approach for plant operators
98. 3 films: Part 1, A practical approach for plant operators
99. Aggressive water: Assessing the extent of the problem
100. Physical characteristics of iron carbonate scale formation in linepipe steels
101. Principal causes and remedies of water main breaks
102. Monitoring and controlling corrosion by potable water
103. Potable water corrosion control
104. A corrosion inhibitor process for domestic water
105. A kinetic model for biological oxidation of ferrous iron by Thiobacillus ferrooxidans
106. Deterioration of water quality in distribution systems
107. Kinetics of iron oxidation by Thiobacillus ferrooxidans
108. A study of corrosion control with sodium hexametaphosphate
109. Condensed phosphates in the treatment of corrosive waters
110. Corrosion rate of cast iron and copper pipe by drinkable water
111. Influence of buffer capacity, chlorine residual, and flow rate on corrosion of mild steel and copper
112. Technical note: Experimental determination of the calcium carbonate saturation states of water systems
113. Calculating the pH of calcium carbonate saturation
114. Eliminating red water with bimetallic glassy phosphate
115. The mechanism of the inhibition of the corrosion of iron by solutions of sodium orthophosphate
116. Selecting the best corrosion control strategy using a new rapid corrosion monitoring tool
117. Condensed phosphates and corrosion control
118. Zinc and polyphosphates as corrosion inhibitors for zinc in near neutral waters
119. Corrosion control with calgon
120. The mechanism of corrosion of water pipes
121. Iron and manganese sequestration facilities using sodium silicate
122. Implementing the best corrosion control for your needs
123. An evaluation of the calcium carbonate saturation indexes
124. A new index for determining the amount of calcium carbonate scale formed by a water
125. Iron corrosion in drinking water distribution systems-surface complexation aspects
126. Iron corrosion in drinking water distribution systems-the effect of pH, calcium, and hydrogen carbonate
127. The influence of water quality on corrosion of iron and copper pipe materials
128. Mechanism of release of iron from corroded iron/steel pipes in water distribution systems
129. Temperature and ionic strength corrections of the langelier index-revisited
130. Replacing polyphosphate with silicate to solve problems with lead, copper, and source water iron
131. Iron bacteria and red water
132. Water quality in distribution. National report USA
133. Standard free enthalpy of formation of Fe(II)-Fe(III) hydroxysulphite green rust one and its oxidation into hydroxysulphate green rust two
134. Surface-enhanced Raman spectroelectrochemical studies of corrosion films on iron in aqueous carbonate solution
135. The search for a corrosion index
136. Characterization of corrosion biofilms in low temperature water distribution systems
137. Minimizing red water in drinking water distribution systems
138. The occurrence and significance of particles and deposits in a drinking water distribution system
139. The siderite model of the formation of corrosion-resistant scales
140. Investigation of the corrosive behavior of waters
141. Estimating corrosion rates in water
142. Corrosion studies
143. Calcium carbonate deposition at iron surfaces
144. Formation of polysilicates as determined by coagulation effects
145. Corrosion study at Carbondale, Ill
146. Investigation of carbon dioxide which attacks calcium carbonate in natural waters
147. Pilot-plant simulation of corrosion in domestic pipe materials
148. Bacterial, chemical, and mineralogical characteristics of tubercles in distribution pipelines
149. Effect of oxygen, chlorides, and calcium ion on corrosion inhibition of iron by polyphosphates
150. Interim enhanced surface water treatment rule; final rule
151. Disinfectants and disinfection byproducts; final rule
152. Lead and copper; final rule
153. Total coliforms; final rule
154. The electrochemical behaviour of iron in stagnant and stirred potassium carbonate-bicarbonate solutions in the 0-75°C temperature range
155. The effect of water quality variables on the corrosive behaviour of water coagulated with a cationic polyelectrolyte and with lime/activated silica
156. Water quality in distribution. National report, the Netherlands
157. The corrosion performance of steel and reinforced concrete in a tropical humid climate. A review
158. Controlling corrosion by controlling bacterial growth
159. Control of water quality in transmission and distribution mains
160. Practical evaluation of iron corrosion control in a drinking water distribution system
161. Influence of operating conditions on materials and water quality in drinking water distribution systems. Corrosion and related aspects of materials for potable water supplies
162. The influence of water parameters on corrosion rate, scale deposition and iron (III) uptake in unprotected iron pipes
163. The use of sodium silicate and sodium polyphosphate to control water problems