Surface Oxides Affecting Metallic Corrosion

Corrosion Reviews

Volumn 19, Issue 3, 2001, Pages 253-272

  Sato, Norio ^a  

^a HOKKAIDO UNIVERSITY   (Japan)

Author keywords

corrosion potential; ion selectivity; photopotential; semiconducting oxide; surface oxide

Indexed keywords

CHARGE TRANSFER; ELECTRIC POTENTIAL; HYDROGEN; IONIC CONDUCTION; IONS; METALS; SOLUTIONS;

ION-SELECTIVITY; PHOTOEXCITATION; SURFACE OXIDES;

ELECTROCHEMICAL CORROSION;

EID: 0034910730     PISSN: 03346005     EISSN: None     Source Type: Journal    
DOI: 10.1515/CORRREV.2001.19.3-4.253     Document Type: Article

References (98)

1. M.F. Kanninen and C.H. Popelar, Advanced Fracture Mechanics, Oxford Univ. Press, New York, 1985.
2. D.K.M. Shum, Int. J. Pressure Ves. Pip., 51, 271 (1992).
3. G.P. Cherepanov, Mechanics of Brittle Fracture, McGraw Hill Inc., New York, 1979.
4. R.P. Wei, Fundamental Aspects of Stress Corrosion Cracking, Ohio State University, Columbus, OH, 1967; pp. 104-112.
5. R.P. Gangloff, Mater. Sci. Engng., AI03, 157 (1988).
6. A.G. Atkins and Y.-W. Mai, Elastic and Plastic Fracture, Ellis Horwood Ltd., Chichester, 1988.
7. R.J.H. Wanhill, Fracture Control Guidelines for Stress-Corrosion Cracking of High Strength Alloys, NLR Technical Publication TP 91006, National Aerospace Laboratory NLR, Amsterdam, 1991.
8. A. Turnbull, Brit. Corros. J., 27, 271 (1992).
9. R.W. Judy, Jr., W.E. King, Jr., J.A. Hauser, and T.W. Crooker, Environmentally Assisted Cracking: Science and Engineering, ASTM STP 1049, American Society for Testing and Materials, Philadelphia, PA, 1990; pp. 410-422.
10. J. Toribio and A.M. Lancha, J. Mater. Sci. Lett., 11, 1085 (1992).
11. J. Toribio and A.M. Lancha, J. Mater. Sci. Lett., 14, 1204 (1995).
12. G.N. Nikiforchin, A.T. Tsyrulnik, B.T. Timofeev, R.B. Kvasnitsa and V.A. Fedorova, Soviet Materials Science, 22 (6), 63 (1986).
13. C.S. Carter, Metall. Trans., 3, 584 (1972).
14. O. Jonas, Fracture 1977; Proceedings of the Fourth International Conference on Fracture (ICF4), University of Waterloo Press, Waterloo, 1977; pp. 269-277.
15. O. Jonas, Corrosion, 29, 299 (1973).
16. S.K. Putatunda and V. Venugopal, J. Test. Eval, 18, 182 (1990).
17. A.H. Hanisch and L.H. Burck, Corrosion, 38, 330 (1982).
18. O.N. Romaniv and G.N. Nikiforchin, Mechanics of Corrosion Fracture of Engineering Alloys (in Russian), Metallurgiya, Moscow, 1986.
19. K. Minoshima, T. Sugiyama and K. Komai, JSME Int. J. (Ser. 1), 33 (4), 520(1990).
20. W.-Y. Chu, C.-M. Hsiao and S.-Q. Li, Scripta Metall., 13, 1057 (1979).
21. K.K. Ray and G.R. Rao, Int. J. Fract., 61, R69 (1993).
22. ISO 7539-6, Corrosion of Metals and Alloys - Stress Corrosion Testing - Pt. 6: Preparation and Use of Pre-Cracked Specimens, 1989.
23. R.J. Walter and W.T. Chandler, Scripta Metall., 13, 975 (1979).
24. A. Baus, J.C. Charbonnier, H.-P. Lieurade, B. Marandet, L. Roesch and G. Sanz, Revue de metallurgie, 12, 891 (1975).
25. J. Blain, J. Masounave and J.I. Dickson, Corros. Sci., 24, 1 (1984).
26. W. Dietzel and K.-H. Schwalbe, Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications, ASTM STP 1210, American Society for Testing and Materials, Philadelphia, PA, 1993; pp. 134-148.
27. O.N. Romaniv, G.N. Nikiforchin and N.A. Deev, Soviet Materials Science, 12 (4), 9 (1976).
28. J.D. Landes and R.P. Wei, Int. J. Fract., 9, 277 (1973).
29. S.J. Hudak, Jr. and R.P. Wei, Structural Mechanics in Reactor Technology, Transactions of the 5th International Conference (Berlin, 1979), Paper G5/5, North-Holland Publishing Co., Amsterdam, 1979.
30. J. Toribio, A.M. Lancha and M. Elices, Corros. Sci., 35, 521 (1993).
31. J. Toribio, Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications, ASTM STP 1210, American Society for Testing and Materials, Philadelphia, PA, 1993; pp. 105-122.
32. R.A. Mayville, T.J. Warren and P.D. Hilton, J. Engng. Mater. Technol., ASME, 109, 188(1987).
33. R.A. Mayville, T.J. Warren and P.D. Hilton, J. Test. Eval, 17, 203 (1989).
34. G. Gabetta, Brit. Corros. J., 28, 107 (1993).
35. K. Hirano, S. Ishizaki, H. Kobayashi and H. Nakazawa, J. Test. Eval, 13, 162(1985).
36. F.P. Ford and M. Silverman, Corrosion, 36, 597 (1980).
37. F.P. Ford, Treatise on Materials Science and Technology, Vol. 25: Embrittlement of Engineering Alloys, Academic Press, New York, 1983; pp. 235-274.
38. G. Abramson, J.T. Evans and R.N. Parkins, Metall. Trans., A16, 101 (1985).
39. P.J.L. Fernandes and D.R.H. Jones, Engng. Failure Anal., 3, 227 (1996).
40. W. Dietzel and M. Pfuff, Hydrogen Effects in Materials. Proceedings of the 51h International Conference, TMS, Warrendale, 1996; pp. 303-311.
41. T. Kawakubo and M. Hishida, J. Engng. Mater. Technol., ASME, 107, 240(1985).
42. D.A. Meyn and P.S. Pao, Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications, ASTM. STP 1210, American Society for Testing and Materials, Philadelphia, PA, 1993; pp. 158-169.
43. A. Turnbull, Fracture from Defects. Proceedings of the 12, h European Conference on Fracture (ECF12), EMAS Publishing-West Midlands, 1998; pp. 1097-1102.
44. D. Rhode and J.C. Radon, Corros. Sci., 21, 381 (1981).
45. S. Horibe and M. Sumita, J. Mater. Sci. Lett., 4, 1498 (1985).
46. R.P. Wei and M. Gao, Hydrogen Effects on Behavior of Materials, TMS, Warrendale, 1990; pp. 789-813.
47. V. Panasyuk and V. Kharin, Environment Assisted Fatigue (ESIS/EGF 7), Mech. Engng. Publ., London, 1990; pp. 123-144.
48. A. McMinn, R.A. Page and S.J. Hudak, Jr., Corrosion Chemistry Within Pits, Crevices and Cracks. Proceedings of the Conference, October, 1984, Teddington, 1987; pp. 243-268.
49. M. Lu, P.S. Pao, T.W. Weir, G.W. Simmons and R.P. Wei, Metall. Trans., M1, 805 (1981).
50. P. Doig and P.E.J. Flewitt, Metall. Trans., A14, 978 (1983).
51. J. Newman and W.H. Smyrl, Metall. Trans., 5, 469 (1974).
52. G.G. Hancock and H.H. Johnson, Trans. Metall. Soc. AIME, 236, 513 (1966).
53. A.W. Thompson, Mater. Sci. Engng., 43, 41 (1980).
54. V.A. Marichev and I.L. Rosenfeld, Corrosion, 32, 423 (1976).
55. R.P. Wei and G.W. Simmons, Int. J. Fract., 17, 235 (1981).
56. D.K. Kuhn and M.R. Shanabarger, Hydrogen Effects on Behavior of Materials, TMS, Warrendale, 1990; pp. 33-41.
57. R.A. Oriani and P.H. Josephic, Acta Metall., 27, 997 (1979).
58. W.W. Gerberich, Y.T. Chen and C. St. John, Metall. Trans., A6, 1485 (1975).
59. D. Krajcinovic, M. Basista, K. Mallick and D. Sumarac, J. Mech. Phys. Solids, 40, 965 (1992).
60. J.L. Waisman, G. Sines and L.B. Robinson, Metall. Trans., 4, 291 (1973).
61. O. Kronshtal and V. Kharin, Soviet Materials Science, 28, 475 (1992).
62. J.P. Hirth, Metall. Trans., All. 861 (1980).
63. T.P. Perng and C.J. Altstetter, Acta Metall., 34, 1771 (1986).
64. M. Itatani, Y. Miyoshi and K.C. Ogura, J. Soc. Mater. Sci. Japan, 40, 1079(1991).
65. S. Ochiai, S. Yoshinaga and Y. Kikuta, Trans. Iron and Steel Inst. Japan, 15, 503 (1975).
66. H.-P. van Leeuwen, Engng. Fract. Mech., 6, 141 (1974).
67. J.K. Tien, A.W. Thompson, I.M. Bernstein and R.J. Richards, Metall. Trans., A7, 821 (1976).
68. C.D. Beachem, Metall. Trans., 3, 437 (1972).
69. Y. Takeda and C.J. McMahon, Metall. Trans., 12A, 1255 (1981).
70. V.S. Kharin, Defect Assessment in Components - Fundamentals and Applications (ESIS/EGF9), Mech. Eng. Publ., London, 1991; pp. 489-500.
71. J.W. Hancock and A.C. Mackenzie, J. Mech. Phys. Solids, 24, 147 (1976).
72. V.V. Panasyuk, A.E. Andreikiv and V.S. Kharin, Soviet Materials Science, 23, 111 (1987).
73. T. Goldenberg, T.D. Lee and J.P. Hirth, Metall. Trans., A9, 1663 (1978).
74. P. Doig and G.T. Jones, J. Mater. Sci., 14, 1440 (1979).
75. V.S. Kharin, Soviet Materials Science, 23, 348 (1987).
76. H.G. Nelson, Treatise on Materials Science and Technology, Vol. 25: Embrittlement of Engineering Alloys, Academic Press, New York, 1983; pp. 275-359.
77. W.W. Gerberich and Y.T. Chen, Metall. Trans., A6, 271 (1975).
78. K.B. Broberg, J. Mech. Phys. Solids, 19, 407 (1971).
79. J. Toribio and V. Kharin, Fatigue Fract. Engng. Mater. Struct., 20, 729 (1997).
80. R.M. McMeeking, J. Mech. Phys. Solids, 25, 357 (1977).
81. R.M. McMeeking and D.M. Parks, Elastic-Plastic Fracture, ASTM, STP 668, American Society for Testing and Materials, Philadelphia, 1979; pp. 175-194.
82. P.C.M. Gortemaker, C. De Pater and R.M.E.J. Spiering, Advances in Fracture Research (ICF5), Pergamon Press, Oxford, 1981; Vol. 1, pp. 151-160.
83. A. Needleman and V. Tvergaard, Elastic-Plastic Fracture: Second Symposium, Vol. 1 - Inelastic Crack Analysis, ASTM, STP 803, American Society for Testing and Materials, Philadelphia, 1983; pp. 80-115.
84. H. Kitagawa and S. Komeda, Computational Mechanics '86: Theory and Applications. Proc. Int. Conf, Tokyo, 1986; Vol. 1, pp. 157-162.
85. B. Moran, R.J. Asaro and C.F. Shih, Metall. Trans., A22, 161 (1991).
86. R. Narasimhan, Engng. Fract. Mech., 47, 919 (1994).
87. F.A. McClintock, Fracture: An Advanced Treatise, Academic Press, New York, 1971; Vol. III, pp. 47-264.
88. C.F. Shih, H.G. De Lorenzi and W.R. Andews, Elastic-Plastic Fracture, ASTM, STP 668, American Society for Testing and Materials, Philadelphia, 1979; pp. 65-120.
89. E.P. Sorensen, Elastic-Plastic Fracture, ASTM, STP 668, American Society for Testing and Materials, Philadelphia, 1979; pp. 151-174.
90. C.F. Shih, J. Mech. Phys. Solids, 29, 305 (1981).
91. R.O. Ritchie and A.W. Thompson, Metall. Trans., A16, 233 (1985).
92. V. Tvergaard and J.W. Hutchinson, J. Mech. Phys. Solids, 40, 1377 (1992).
93. F.W. Brust, T. Nishioka, S.N. Atluri and M. Nakagaki, Engng. Fract. Meek, 22, 1079(1985).
94. K.B. Broberg, Engng. Fract. Mech., 50, 157 (1995).
95. T. Tabata and H.K. Birnbaum, Scripta Metall., 17, 947 (1983).
96. I.R. Kramer and J.P. Hirth, Scripta Metall., 18, 539 (1984).
97. O.A. Onyewuenyi, Hydrogen Degradation of Ferrous Alloys, Noyes Publ., Park Ridge, 1985; pp. 414-453.
98. T. Nakayama and M. Takano, Corrosion, 37, 226 (1981).