Energy absorption and ductile failure in metal sheets under lateral indentation by a sphere

International Journal of Impact Engineering

Volumn 24, Issue 10, 2000, Pages 1017-1039

  Simonsen, Bo Cerup ^a   Lauridsen, Lars Peder ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

CURVE FITTING; DUCTILITY; ENERGY ABSORPTION; FAILURE (MECHANICAL); FINITE ELEMENT METHOD; FRACTURE MECHANICS; PLATES (STRUCTURAL COMPONENTS); SPHERES; STIFFNESS; STRUCTURAL ANALYSIS; STRUCTURAL LOADS;

AXIS SYMMETRIC LOADING; HARDENING EXPONENTS; LATERAL INDENTATION; STRENGTH COEFFICIENTS;

SHEET METAL;

EID: 0034324889     PISSN: 0734743X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0734-743X(00)00024-5     Document Type: Article

References (38)

1. Langseth M, Larsen PK. Dropped object's plugging capacity of steel plates: An experimental investigation. Int J Impact Engng 1990;24(3):289-316.
2. Chen CM. Dynamic response of submerged plates impacted by drill-collars. Proceedings of the First International Offshore and Polar Engineering Conference, Edinburgh, United Kingdom, 1991.
3. Langseth M. Dropped objects - plugging capacity of steel plates. Ph D thesis. The Norwegian Institute of Technology, Department of Structural Engineering, 1988.
4. Langseth M, Larsen PK. Dropped object's plugging capacity of aluminium alloy plates. Int J Impact Engng 1994;15(3):225-41.
5. Amdahl J. Energy absorption in ship-platform impacts. Ph D thesis, The University of Trondheim, 1983.
6. Minorsky VU. An analysis of ship collisions with reference to protection of nuclear power plants. J Ship Res 1959;3:1-4.
7. Paik J et al. On rational design of double hull tanker structures against collision. Proceedings of the SNAME Annual Meeting, Washington, DC, USA, 1999. SNAME.
8. Paik JK, Terndrup Pedersen P. Modeling of the internal mechanics in ship collisions. Ocean Engng 1996;23(2):107-42.
9. Simonsen BC. Theory and validation for the collision module. Technical Report 66, Joint MIT-Industry Program on Tanker Safety, June 1999.
10. Wang G, Ohtsubo H, Arita K. Large deflection analysis of a rigid-plastic circular plate pressed by a sphere. J Appl Mech 1998;65:533-5.
11. Wierzbicki T, Simonsen BC. Global structural model of bow indentation into ship side. Technical Report 2, MIT, 1996.
12. Zhang S. The mechanics of Ship Collisions. Ph D thesis, Technical University of Denmark, Department of Naval Architecture and Offshore Engineering, 1999.
13. Boon B, Weijs H. Local impact on aluminium plating. Proceedings of the Fourth International Conference on Steel and Aluminium Structures, Espoo, Finland, 1999.
14. Pedersen PT, Zhang S. Minimum plate thickness in high speed craft. In: Osterweld, Tan, editors. Proceedings of The Sixth International Symposium on Practical Design of Ships and Mobile Units, (PRADS98). The Hague, The Netherlands, 1998. p. 959-65.
15. Ferron G, Zeghloul A. Strain localization and fracture in metal sheets. In: Norman Jones and Tomasz Wierzbicki, editors. Structural Crashworthiness and Failure. London: Elsevier, 1993. p. 131-63.
16. Marciniak Z, Kuczunski K. Limit strains in the process of stretch-forming sheet metal. Int J Mech Sci 1967;9:609-20.
17. Mikkelsen LP. Necking in rectangular bars approximated by a 2-d gradient dependent plasticity model. Eur J Mech A/Solids 1999;18:805-18.
18. Tvergaard V. Effect of kinematic hardening on localized necking in biaxially stretched sheets. Int J Mech Sci 1978;20:651-8.
19. Goldsmith W, Liss J, Kelly JM. A phenomenological penetration model of plates. Int J Impact Engng 1983;1(4):321-42.
20. Liss J, Goldsmith W. Plate perforation phenomena due to normal impact by blunt cylinders. Int J Impact Engng 1984;2(1):37-64.
21. Levy N, Goldsmith W. Normal impact and perforation of thin plates by hemispherically-tipped projectiles - I. Analytical considerations. Int J Impact Engng 1984;2(3):209-30.
22. Levy N, Goldsmith W. Normal impact and perforation of thin plates by hemispherically-tipped projectiles - II. Experimental results. Int J Impact Engng 1984;2(4):299-324.
23. Jones N, Kim SB. A study on the large ductile deformations and perforation of mild steel plates struck by a mass. J Pressure Vessel Technol 1997;119:178-84.
24. Woodward RL. A structural model for thin plate perforation by normal impact of blunt projectiles. Int J Impact Engng 1987;6(2):129-40.
25. Woodward L. The interrelation of failure modes observed in the penetration of metallic targets. Int J Impact Engng 1984;2(2):121-30.
26. Backman ME, Goldsmith W. The mechanics of penetration of projectiles into targets. Int J Engng Sci 1978;16:1-99.
27. Anderson Jr CE, Bodner SR. Ballistic impact: the status of analytical and numerical modeling. Int J Impact Engng 1988;7(1):9-36.
28. Yu X. Structural analysis with large deformations up to fracture and with dynamic failure. Ph D thesis, Hamburg University, 1996 (in German).
29. Simonsen BC. Ship grounding on rock: I - theory. Marine Structures 1998;10(7):519-62.
30. Kaminishi K et al. Dependence of energy-absorbing capacity on mechanical properties under penetration. JSME Internat J 1990;33(3):297-302.
31. Kaminishi K et al. Crack initiation and extension under penetration of thin metal plates. JSME Internat J 1992;35(4): 475-481.
32. Kawano S et al. Energy-absorbing capacity of ductile thin metal sheet under quasi-statical penetration by a conical punch. JSME Internat J 1988;31(1):108-116.
33. Hallquist JO. LS-DYNA, Theoretical Manual. Livermore Software Technology Corporation, May 1998.
34. Belytschko T, Lin J, Tsay CS. Explicit algorithms for nonlinear dynamics of shells. Comput Methods Appl Mech Engng 1984;42:225-51.
35. Lehman E, Yu X. On ductile rupture criteria for structural tear in the case of ship collision and grounding. Proceedings of PRADS98, Netherlands. Amsterdam: Elsevier, 1998. p. 149-156.
36. Zhu L, Atkins AG. Failure criteria for ship collision and grounding. Proceedings of PRADS98, Netherlands. Amsterdam: Elsevier, 1998. p. 141-7.
37. Hill R. On discontinuous states, with special reference to localized necking in thin sheets. J Mech Phys Solids 1952;1:19-30.
38. Simonsen BC. Mechanics of ship grounding. Ph D thesis, Technical University of Denmark, Department of Naval Architecture and Offshore Engineering, 1997.