Gas turbine heat transfer: Past and future challenges

Journal of Propulsion and Power

Volumn 16, Issue 4, 2000, Pages 583-589

  Schiele, Ralf ^a,b   Wittig, Sigmar ^a,b  

^a UNIVERSITY OF KARLSRUHE   (Germany)

^b Lehrst Inst F Thermische S   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; COMBUSTORS; COOLING; HEAT TRANSFER;

GAS TURBINE COMBUSTORS;

GAS TURBINES;

EID: 0034225815     PISSN: 07484658     EISSN: None     Source Type: None    
DOI: 10.2514/2.5611     Document Type: Article

References (71)

1. Arora, S. C., and Messh, W. A., "Pressure Drop and Heat Transfer Characteristics of Circular and Oblong Low Aspect Ratio Pin Fins," CP-390, AGARD, 1985, pp. 4.1-4.14.
2. Armstrong, J., and Winstanley, D., "A Review of Staggered Array Pin Fin Heat Transfer for Turbine Cooling Applications," Journal of Turbomachinery, Vol. 110, No. 1, 1988, pp. 94-103.
3. Chyu, M. K., "Heat Transfer and Pressure Drop for Short Pin Fin Arrays with Pin-Endwall Fillet," Journal of Heat Transfer, Vol. 112, No. 4, 1990, pp. 926-932.
4. Hwang, J.-J., and Liou T.-M., "Heat Transfer Augmentation in a Rectangular Channel with Slit Rib Turbulators on Two Opposite Walls," Journal of Turbomachinery, Vol. 119, No. 3, 1997, pp. 617-623.
5. Chandra, P. R., Fontenot, M. L., and Han, J.-C., "Effect of Rib Profiles on Turbulent Channel Flow Heat Transfer," Journal of Thermophysics and Heat Transfer, Vol. 12, 1998, pp. 116, 117.
6. Kercher, D. M., and Tabakoff, W., "Heat Transfer by Square Array of Round Air Jets Impinging Perpendicular to a Flat Surface Including the Effect of Spent Air," Journal of Engineering for Power, Vol. 92, No. 1, 1970, pp. 73-82.
7. Metzger, D. E., Florschuetz, Takeuchi, D. I., Behee, R. D., and Berry, R. A., "Heat Transfer Characteristics for Inline and Staggered Arrays of Circular Jets with Crossflow of Spent Air," Journal of Engineering for Power, Vol. 101, No. 3, 1979, pp. 526-531.
8. Landreth, C. C., and Adrian, R. J., "Impingement of a Low Reynolds Number Turbulent Circular Jet onto a Flat Plate at Normal Incidence," Experiments in Fluids, Vol. 9, No. 1, 1990, pp. 74-84.
9. Martiny, M., Schulz, A., Wittig, S., and Dilzer, M., "Influence of a Mixing-Jet on Film Cooling," 42nd Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 97-GT-247, Orlando, FL, June 1997.
10. Button, B. L., "Effectiveness Measurements for a Cooling Film Disrupted by a Single Jet with Wall Plunging," CP-390, AGARD, 1985, pp. 24.1-24.10.
11. Goldstein, R. J., Eckert, E. R. G., and Burggraf, F., "Effects of Hole Geometry and Density on Three-Dimensional Film Cooling," International Journal of Heat and Mass Transfer, Vol. 17, 1974, pp. 595-607.
12. Makki, Y., and Jakubowski, G., "An Experimental Study of Film Cooling from Diffused Trapezoidal Shaped Holes," AIAA Paper 86-1326, 1986.
13. Sen, B., Schmidt, D., and Bogard, D., "Film Cooling with Compound Angle Holes: Heat Transfer," Journal of Turbomachinery, Vol. 118, No. 4, 1996, pp. 800-806.
14. Schmidt, D., Sen, B., and Bogard, D., "Film Cooling with Compound Angle Holes: Adiabatic Effectiveness," Journal of Turbomachinery, Vol. 118, No. 4, 1996, pp. 807-813.
15. Haller, B. R., and Camus, J. J., "Aerodynamic Loss Penalty Produced by Film Cooling Transonic Turbine Blades," Journal of Engineering for Gas Turbines and Power, Vol. 106, No. 1, 1984, pp. 198-205.
16. Giebert, D., Gritsch, M., Schulz, A., and Wittig, S., "Film-Cooling from Holes with Expanded Exits: A Comparison of Computational Results with Experiments," 42nd Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 97-GT-163, Orlando, FL, June 1997.
17. Wittig, S., Schulz, A., Gritsch, M., and Thole, K. A., "Transonic Film-Cooling Investigations: Effects of Hole Shapes and Orientations," 41st Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 96-GT-222, Birmingham, UK, June 1996.
18. Thole, K. A., Gritsch, M., Schulz, A., and Wittig, S., "Effect of a Crossflow at the Entrance to a Film-Cooling Hole," Journal of Fluids Engineering, Vol. 119, No. 3, 1997, pp. 533-540.
19. Thole, K. A., Gritsch, M., Schulz, A., and Wittig, S., "Flowfield Measurements for Film-Cooling Holes with Expanded Exits," Journal of Turbomachinery, Vol. 120, No. 2, 1998, pp. 327-336.
20. Gritsch, M., Schulz, A., and Wittig, S., "Discharge Coefficient Measurements of Film-Cooling Holes with Expanded Exits," Journal of Turbomachinery, Vol. 120, No. 3, 1998, pp. 549-556.
21. Gritsch, M., Schulz, A., and Wittig, S., "Adiabatic Wall Effectiveness Measurements of Film-Cooling Holes with Expanded Exits," Journal of Turbomachinery, Vol. 120, No. 3, 1998, pp. 557-563.
22. Hay, N., Lampard, D., and Benmansour, S., "Effect of Crossflows on the Discharge Coefficient of Film Cooling Holes," Journal of Engineering for Power, Vol. 105, No. 1, 1983, pp. 243-248.
23. Hay, N., and Lampard, D., "The Discharge Coefficient of Flared Film Cooling Holes," 40th Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 95-GT-15, Houston, TX, June 1995.
24. LeBrocq, P. V., Launder, B. E., and Priddin, C. H., "Experiments on Transpiration Cooling: Discrete Hole Injection as a Means of Transpiration Cooling; An Eperimental Study," Proceedings of the Institution of Mechanical Engineers, Vol. 187, 1973, pp. 149-157.
25. Metzger, D. E., Takeuchi, D. I., and Kuenstler, P. A., "Effectiveness and Heat Transfer with Full-Coverage Film Cooling," Journal of Engineering for Power, Vol. 95, No. 1, 1973, pp. 180-184.
26. Mayle, R. E., and Camarata, F. J., "Multihole Cooling Film Effectiveness and Heat Transfer," Journal of Heat Transfer, Vol. 97, No. 2, 1975, pp. 534-538.
27. Crawford, M. E., Kays, W. M., and Moffat, R. J., "Full-Coverage Film Cooling Part I: Comparison of Heat Transfer Data for Three Injection Angles," Journal of Engineering for Power, Vol. 102, No. 4, 1980, pp. 1000-1012.
28. Kasagi, N., Hirata, M., and Kumada, M., "Studies of Full-Coverage Film Cooling Part 1: Cooling Effectiveness of Thermally Conductive Wall," 26th Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 81-GT-37, Houston, TX, March 1981.
29. Kumada, M., Hirata, M., and Kasagi, N., "Studies of Full-Coverage Film Cooling Part 2: Measurements of Local Heat Transfer Coefficient," 26th Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 81-GT-38, Houston, TX, March 1981.
30. Hempel, H., and Friedrich, R., "Untersuchungen zur Effusionskühlung von Gasturbinenschaufeln," Forschung in der Kraftwerkstechnik, 1977, pp 67-73.
31. Hempel, H., Friedrich, R., and Wittig, S., "Full Coverage Film-Cooled Blading in High Temperature Gas Turbines: Cooling Effectiveness, Profile Loss and Thermal Efficiency," Journal of Engineering for Power, Vol. 102, No. 4, 1980, pp. 957-963.
32. Martiny, M., Schulz, A., and Wittig, S., "Full Coverage Film Cooling Investigations: Adiabatic Wall Temperatures and Flow Visualization," ASME Winter Annual Meeting, Heat Transfer in Gas Turbines, American Society of Mechanical Engineers, Paper 95-WA/HT-4, San Francisco, CA, Nov. 1995.
33. Martiny, M., Schulz, A., and Wittig, S., "Mathematical Model Describing the Coupled Heat Transfer in Effusion Cooled Combustor Walls," 42nd Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 97-GT-329, Orlando, FL, June 1997.
34. Gutmann, C., Schulz, A., and Wittig, S., "A New Approach for a Low-Cooled Ceramic Nozzle Vane," 41st Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 96-GT-232, Birmingham, UK. June 1996.
35. Stürmer, G., Schulz, A., and Wittig, S., "Life Time Prediction for Ceramic Gas Turbine Components," 26th Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 91-GT-96, Orlando, FL, June 1991.
36. Nakakado, K., Machida, T., Miyata, H., Hisamatsu, T., Mori, N., and Yuri, I., "Strength Design and Reliability Evaluation of a Hybrid Ceramic Stator Vane for Industrial Gas Turbines," Journal of Engineering for Gas Turbines and Power, Vol. 117, No. 1, 1995, pp. 245-250.
37. Tsuchiya, T., Furuse, Y., Yoshino, S., Chikami, R., Tsukagoshi, K., and Moro, M., "Development of Air-Cooled Ceramic Nozzles for a Power Generating Gas Turbine," 40th Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 95-GT-105, Houston, TX, June 1995.
38. Machida, T., Nakayama, M., Wada, K., Hisamatsu, T., Yuri, I., and Watanabe, K., "Development of Ceramic Stator Vane for 1500°C Class Gas Turbine," 41st Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 96-GT-459, Birmingham, UK, June 1996.
39. Wenglarz, R., Calcuttawala, S., and Pope, E., "Ceramic Vane Demonstration in an Industrial Gas Turbine," 42nd Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 97-GT-155, Orlando, FL, June 1997.
40. Dilzer, M., Gutmann, C., Schulz, A., and Wittig, S., "Testing of a Low Cooled Ceramic Nozzle Vane Under Transient Conditions," 43rd Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 98-GT-116, Stockholm, June 1998.
41. Filsinger, D., Schulz, A., and Wittig, S., "Reliable Design of Static Components for Small Gas Turbines," International Ceramics, Vol. 1, No. 1, 1996, pp. 91-96.
42. Pfeiffer, A., Schulz, A., and Wittig, S., "Principles of the ITS Ceramic Research Combustor Design: Segmented Flame Tube and Staged Combustion," 26th Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 91-GT-63, Orlando, FL, June 1991.
43. Münz, S., Schulz, A., and Wittig, S., "Evaluation of a New Design Concept for a Ceramic Flame Tube Under Engine Conditions," 41st Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 96-GT-498, Birmingham, UK, June 1996.
44. Chandrasekhar, S., Radiative Transfer, Dover, New York, 1960.
45. Koch, R., Krebs, W., Wittig, S., and Viskanta, R., "The Discrete Ordinales Quadrature Schemes for Multidimensional Radiative Heat Transfer," Journal of Quantitative Spectroscopy and Radiative Transfer, Vol. 53, No. 4, 1995, pp. 353-372.
46. Krebs, W., Koch, R., Bauer, H.-J., and Wittig, S., "Three-Dimensional Spectral Radiative Transfer Calculation in a Cylindrical Model Combustor Using the Discrete Ordinates Method," Radiative Transfer, Vol. 1, edited by M. P. Mengüc, Begell, New York, 1995, pp. 355-371.
47. Krebs, W., Koch, R., Ganz, B., Eigenmann, L., and Wittig, S., "Effect of Temperature and Concentration Fluctuations on Radiative Heat Transfer in Turbulent Flames," 26th International Symposium on Combustion, 1996, pp. 2763-2770.
48. Ganz, B., Schmittel, P., Koch, R., and Wittig, S., "Validation of Numerical Methods at a Confined Turbulent Natural Gas Diffusion Flame Considering Detailed Radiative Transfer," American Society of Mechanical Engineers, Paper 98-GT-228, 1998.
49. Ganz, B., Koch, R., Krebs, W., and Wittig, S., "Spectral Emissivity Measurements of Thermal Barrier Coatings," 7th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, HDT 357-1, 1998, pp. 291-296.
50. Mayle, R. E., "The Role of Laminar-Turbulent Transition in Gas Turbine Engines," Journal of Turbomachinery, Vol. 113, No. 3, 1991, pp. 509-537.
51. Savill, A. M., "Further Progress in the Turbulence Modelling of the By-Pass Transition," Engineering Turbulence Modelling and Measurements, Vol. 2, edited by W. Rodi and F. Martelli, Elsevier Science, New York, 1993, pp. 583-592.
52. Sieger, K., Schulz, A., Crawford, M. E., and Wittig, S., "An Evaluation of Low-Reynolds-Number k-ε Turbulence Models for Predicting Transition Under the Influence of Free-Stream Turbulence and Pressure Gradient," Engineering Turbulence Modelling and Measurements, Vol. 2, edited by W. Rodi and F. Martelli, Elsevier Science, New York, 1993, pp. 593-602.
53. Schmidt, R. C., and Patankar, S. V., "Two-Equation Low-Reynolds-Number Turbulence Modeling of Transitional Boundary Layer Flow Characteristic of Gas Turbine Blades," NASA CR 4145, 1988.
54. Sieger, K., Schiele, R., Schulz, A., and Wittig, S., "Gas Turbine Blade Heat Transfer Calculations: An Assessment of Different Low-Reynolds-Number k-ε Turbulence Models," 5th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Elsevier Science, New York, 1994, pp. 454-471.
55. Mayle, R. E., and Schulz, A., "The Path to Predicting Bypass Transition," Journal of Turbomachinery, Vol. 119, No. 3, 1997, pp. 405-411.
56. Schiele, R., Schulz, A., Kaufmann, K., and Wittig, S., "Effiziente Berechnung des laminar-turbulenten Umschlags in Gasturbinen," DGLR Jahrbuch 1998, Deutsche Gesellschaft für Luft- und Raumfahrt, DGLR, Bonn, Germany, Paper JT98-052, 1998.
57. Launder, B. E., and Spalding, D. B., "The Numerical Computation of Turbulent Flows," Computer Methods in Applied Mechanics and Engineering, Vol. 3, 1974, pp. 269-289.
58. Rodi, W., Mansour, N. N., and Michelassi, V., "One-Equation Near-Wall Turbulence Modeling with the Aid of Direct Simulation Data," Journal of Fluids Engineering, Vol. 115, No. 1, 1993, pp. 196-205.
59. Sieger, K., Schiele, R., Kaufmann, K., and Wittig S., "A Two-Layer Turbulence Model for the Calculation of Transitional Boundary-Layers," ERCOFTAC Bulletin, Vol. 24, 1995, pp. 21-25.
60. Schiele, R., Sieger, K., Schulz, A., and Wittig, S., "Heat Transfer Investigations on a Highly Loaded, Aerothermally Designed Turbine Cascade," Proceedings of the 12th International Symposium on Air Breathing Engines, AIAA Publ., edited by F. S. Billig, 1995, pp. 1091-1101.
61. Launder, B. E., and Sharma, N., "Application of the Energy-Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disc," Letters in Heat and Mass Transfer, Vol. 1, 1974, pp. 131-138.
62. Bohn, D., Schönenborn, H., Bohnhoff, B., and Wilhelmi, H., "Prediction of the Film-Cooling Effectiveness in Gas Turbine Blades Using a Numerical Model for the Coupled Simulation of Fluid Flow and Diabatic Walls," Proceedings of the 12th International Symposium on Air Breathing Engines, AIAA Publ., edited by F. S. Billig, 1995, pp. 1150-1159.
63. Bohn, D., Kusterer, K., and Schönenborn, H., "3-D Numerical Simulation of the Flow Through a Turbine Blade Cascade with Cooling Injection at the Leading Edge," 42nd Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 97-GT-247, Orlando, FL, June 1997.
64. Heselhaus, A., and Vogel, D. T., "Numerical Simulation of Turbine Blade Cooling with Respect to Blade Heat Conduction and Inlet Temperature Profiles," AIAA Paper 95-3041, 1995.
65. Kao, K.-H., and Liou, M. S., "On the Application of Chimera/ Unstructured Hybrid Grids for Conjugate Heat Transfer," 41st Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 96-GT-156, Birmingham, UK, June 1996.
66. Ho, Y.-H., Athavale, M. M., Forry, J. M., and Hendricks R. C., "Numerical Simulation of Secondary Flow in Gas Turbine Disc Cavities, Including Conjugate Heat Transfer," American Society of Mechanical Engineers, Paper 96-GT-67, 1996.
67. Papanicolaou, E. L., Giebert, D., Koch, R., and Schulz, A., "A Discretization Approach for Conjugate Heat Transfer and Application to Turbomachinery Flows," Proceedings of the ASME, Heat Transfer Div., Vol. 3, HTD Vol. 361-3/PID-Vol.3, edited by R. A. Nelson, Jun, L. W. Swanson, M. V. A. Bianchi, and C. Camci, American Society of Mechanical Engineers, Fairfield, NJ, 1998, pp. 349-362.
68. Giebert, D., Bauer, H.-J., and Wittig, S., "A Comparative Study of Two Low-Reynolds Number k-ε Models for Recirculating Flows with and Without Heat Transfer," Engineering Turbulence Modelling and Experiments, Elsevier Science, New York, Vol. 3, edited by W. Rodi and G. Bergeles, 1996, pp. 665-674.
69. Abe, K., Kondoh, T., and Nagano, Y., "A New Turbulence Model for Predicting Fluid Flow and Heat Transfer in Seperating and Reattaching Flows," International Journal of Heat and Mass Transfer, Vol. 37, 1994, pp. 139-151.
70. Wittig, S., Jacobsen, K., Schelling, U., and Kim, S., "Heat Transfer in Stepped Labyrinth Seals," 32nd Annual International Gas Turbine and Aeroengine Congress and Exposition, American Society of Mechanical Engineers, Paper 87-GT-92, Anaheim, CA, May-June 1987.
71. Waschka, W., Wittig, S., Scherer, T., and Kim, S., "Leakage Loss and Heat Transfer in High-Speed Rotating Labyrinth Seals: An Experimental Verification of Numerical Codes," Proceedings of the Yokohama International Gas Turbine Congress, Gas Turbine Society of Japan, Vol. 2, 1991, pp. 239-247.