Prediction of crack opening stress for part-through cracks and its verification using a modified strip-yield model

Engineering Fracture Mechanics

Volumn 66, Issue 1, 2000, Pages 1-14

  Kim, J H ^a   Lee, S B ^a  

^a Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

Crack opening stress; Part through crack; Plasticity induced closure; Stress intensity factor; Strip yield model

Indexed keywords

CRACK PROPAGATION; MATHEMATICAL MODELS; PLASTICITY; STRESS ANALYSIS; STRESS INTENSITY FACTORS;

CRACK OPENING STRESS; PART-THROUGH CRACKS;

FRACTURE MECHANICS;

CRACK INITIATION; FATIGUE CRACK; PLASTICITY; STRESS INTENSITY FACTOR;

EID: 0034025519     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0013-7944(00)00006-0     Document Type: Article

References (21)

1. Newman J.C. Jr. A crack opening stress equation for fatigue crack growth. Int. J. Fract. 24:1984;R131-R135.
2. Daniewicz S.R. A modified strip-yield model for prediction of plasticity-induced closure in surface flaws. Fatigue Fract. Engng. Mater. Struct. 21:1998;885-901.
3. McClung R.C. The influence of applied stress, crack length, and stress intensity factor on crack closure. Metall. Trans. 22A:1991;1559-1571.
4. Elber W. Fatigue crack closure under cyclic tension. Engng. Fract. Mech. 2:1970;37-45.
5. Newman JC. Jr. A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading. ASTM STP 748 1981;53-84.
6. Bloom J.M., Daniewicz S.R., Hechmer J.L. Plane strain crack growth models for fatigue crack growth life predictions. J. Pressure Vessel Tech. 118:1996;78-85.
7. McClung R.C. Finite element analysis of specimen geometry effects on fatigue crack closure. Fatigue Fract. Engng. Mater. Struct. 17:(8):1994;861-872.
8. Liu J.Z., Wu X.R. Study on fatigue crack closure behavior for various cracked geometries. Engng. Fract. Mech. 57:(5):1997;475-491.
9. Chermahini R.G., Palmberg B., Blom A.F. Fatigue crack growth and closure behavior of semicircular and semi-elliptical surface flaws. Int. J. Fat. 15:(4):1993;259-263.
10. Zhang J.Z., Bowen P. On the finite element simulation of three-dimensional semi-circular fatigue crack growth and closure. Engng. Fract. Mech. 60:(3):1998;341-360.
11. Wang G.S. Analysing the fatigue crack growth in structural details. Engng. Fract. Mech. 53:(3):1996;345-361.
12. Zhao W., Wu X.R., Yan M.G. Weight function method for three dimensional crack problems-I. Basic formulation and application to an embedded elliptical crack in finite plates. Engng. Fract. Mech. 34:(3):1989;593-607.
13. Zhao W., Wu X.R., Yan M.G. Weight function method for three dimensional crack problems-II. Application to surface cracks at a hole in finite thickness plates under stress gradients. Engng. Fract. Mech. 34:(3):1989;609-624.
14. Wang G.S. Crack surface displacements for Mode I one-dimensional cracks in general two-dimensional geometry. Engng. Fract. Mech. 40:(3):1991;535-548.
15. Tada H, Paris PC, Irwin GR. The stress analysis of cracks handbook, 2nd ed. 1985.
16. Wang G.S., Blom A.F. A strip model for fatigue crack growth predictions under general load conditions. Engng. Fract. Mech. 40:1991;507-533.
17. Kim Jong-Han, Song Ji-Ho. Crack growth and closure behavior of surface cracks under axial loading. Fatigue Fract. Engng. Mater. Struct. 15:(5):1992;477-489.
18. Oh CS. Crack closure and growth behavior of surface fatigue cracks under pure bending loading. Ph.D. thesis. KAIST, 1996.
19. Jolles M, Tortoriello V. Geometry variations during fatigue growth of surface flaws. ASTM 791 1983;1297-1307.
20. Jolles M, Tortoriello V. Effects of constraint variation on the fatigue growth of surface flaws. ASTM STP 833 1984; 300-311.
21. Newman JC. Jr, Crews JH. Jr, Bigelow CA, Dawicke DS. Variation of a global constraint factor in cracked bodies under tension and bending loads. ASTM STP 1244;21-42.