A modified strip-yield model for prediction of plasticity-induced closure in surface flaws

Fatigue and Fracture of Engineering Materials and Structures

Volumn 21, Issue 7, 1998, Pages 885-901

  Daniewicz, S R ^a  

^a MISSISSIPPI STATE UNIVERSITY   (United States)

Author keywords

Crack closure; Crack propagation; Fatigue; Stress analysis; Surface cracks

Indexed keywords

CALCULATIONS; CORRELATION METHODS; CRACK PROPAGATION; CRACKS; MATHEMATICAL MODELS; PLASTICITY; STRESS ANALYSIS; STRESS INTENSITY FACTORS; STRESSES;

CRACK CLOSURE; CRACK OPENING STRESS; CYCLIC LOADING; ELASTIC CRACK DISPLACEMENT; SLICE SYNTHESIS METHODOLOGY; STRIP YIELD MODEL; SURFACE FLAW;

FATIGUE OF MATERIALS;

EID: 0032115117     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1046/j.1460-2695.1998.00073.x     Document Type: Article

References (37)

1. N. A. Fleck, I. F. C. Smith and R. A. Smith (1983) Closure behavior of surface cracks. Fatigue Engng Mater. Struct. 6, 225-239.
2. M. Jolles and V. Tortoriello (1983) Geometry variations during fatigue growth of surface flaws. In: Fracture Mechanics: 14th Symposium - Vol. I: Theory and Analysis, ASTM STP 791, pp. 1297-1307.
3. M. Jolles and V. Tortoriello (1984) Effects of constraint variation on the fatigue growth of surface flaws. In: Fracture Mechanics: 15th Symposium, ASTM STP 833, pp. 300-311.
4. J. C. Newman and I. S. Raju (1984) Prediction of fatigue crack-growth patterns and lives in three-dimensional cracked bodies. In: Advances in Fracture Research, Proceedings of the 6th Int. Conf. of Fracture (ICF6), Pergamon Press, pp. 1597-1608.
5. R. Foroughi and J. C. Radon (1988) Crack closure Behavior of surface cracks under bending loading. In: Mechanics of Fatigue Crack Closure, ASTM STP 982, pp. 260-269.
6. J. H. Kim and J. H. Song (1992) Crack growth and closure behavior of surface cracks under axial loading. Fatigue Fract. Engng Mater. Struct. 15, 477-489.
7. A. Carpinteri (1994) Propagation of surface cracks under cyclic loading. In: Handbook of Fatigue Crack Propagation in Metallic Structures, Elsevier Science, pp. 653-705.
8. W. Elber (1970) Fatigue crack closure under cyclic tension. Engng Fracture Mech. 2, 37-45.
9. W. Elber (1971) The significance of fatigue crack closure. In: Damage Tolerance in Aircraft Structures, ASTM STP 486, pp. 230-242.
10. R. G. Chermahini, B. Palmberg and A. F. Blom (1993) Fatigue crack growth and closure behavior of semicircular and semi-elliptical surface flaws. Int. J. Fatigue 15, 259-263.
11. J. C. Newman (1981) A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading. In: Methods and Models for Predicting Fatigue Crack Growth Under Random Loading, ASTM STP 748, pp. 53-84.
12. H. D. Dill and C. R. Saff (1977) Analysis of crack growth following compressive high loads based on crack surface displacements and contact analysis. In: Cyclic Stress-Strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM STP 637, pp. 141-152.
13. B. Budiansky and J. W. Hutchinson (1978) Analysis of closure in fatigue crack growth. J. Appl. Mech. 45, 267-276.
14. J. C. Newman (1984) A crack opening stress equation for fatigue crack growth. Int. J. Fracture 24, R131-R135.
15. F. K. Ibrahim (1986) A study of the effect of mechanical variables on fatigue crack closure and propagation. Ph.D. Dissertation, University of Waterloo.
16. A. U. de Koning and G. Liefting (1988) Analysis of crack opening behavior by application of a discretized strip yield model. In: Mechanics of Fatigue Crack Closure, ASTM STP 982, pp. 437-458.
17. H. Nakamura and H. Kobayashi (1988) Analysis of fatigue crack closure caused by asperities using the modified Dugdale model. In: Mechanics of Fatigue Crack Closure, ASTM STP 982, pp. 459-474.
18. D. Chen and H. Nisitani (1988) Analytical and experimental study of crack closure behavior based on an S-shaped unloading curve. In: Mechanics of Fatigue Crack Closure, ASTM STP 982, pp. 475-488.
19. S. R. Daniewicz (1991) Conception and development of improved analytical prediction models for fatigue induced tooth breakage due to cyclic bending in spur gear teeth. Ph.D. Dissertation, Ohio State University.
20. G. S. Wang and A. F. Blom (1991) A strip model for fatigue crack growth predictions under general load conditions. Engng Fracture Mech. 40, 507-533.
21. S. R. Daniewicz, J. A. Collins and D. R. Houser (1994) An elastic-plastic analytical model for predicting fatigue crack growth in arbitrary edge-cracked two-dimensional geometries with residual stress. Int. J. Fatigue 16, 123-133.
22. J. C. Newman (1995) Fatigue-life prediction using a crack-closure model. J. Engng Mater. Tech. 117, 433-439.
23. S. R. Daniewicz and J. M. Bloom (1996) An assessment of geometry effects on plane stress fatigue crack closure using a modified strip-yield model. Int. J. Fatigue 18, 483-490.
24. W. Zhao, X. R. Wu and M. G. Yan (1989) Weight function method for three dimensional crack problems - I. Basic formulation and application to an embedded elliptical crack in finite plates. Engng Fracture Mech. 34, 593-607.
25. C. Mattheck and F. Görner (1984) Leak prediction by use of a generalized Dugdale model for semielliptical surface flaws in plates under tension loading. Proc. 5th European Conf. on Fracture, Portugal.
26. S. R. Daniewicz (1994) Accurate and efficient numerical integration of weight functions using Gauss-Chebyshev quadrature. Engng Fracture Mech. 48, 541-544.
27. W. T. Fujimoto (1976) Determination of crack growth and fracture toughness parameters for surface flaws emanating from fastener holes. In: Proc. AIAA/ASME/SAE 17th Structures, Structural Dynamics, and Material Conf., King of Prussia, PA, pp. 522-531.
28. C. R. Saff and K. B. Sanger (1984) Part-through flaw stress intensity factors developed by a slice synthesis technique. In: Fracture Mechanics: 15th Symposium, ASTM STP 833, pp. 24-43.
29. W. Zhao, X. R. Wu and M. G. Yan (1989) Weight function method for three dimensional crack problems - II. Application to surface cracks at a hole in finite thickness plates under stress gradients. Engng Fracture Mech. 34, 609-624.
30. W. Zhao and M. A. Sutton (1995) Elastic solutions for corner cracks undergoing uniform displacement-controlled loading. Int. J. Fracture 70, 335-346.
31. D. S. Dugdale (1960) Yielding of steel sheets containing slits. J. Mech. Physics Solids 8, 100-104.
32. D. J. Ayres (1970) A numerical procedure for calculating stress and deformation near a slit in a three-dimensional elastic-plastic solid. Engng Fracture Mech. 2, 87-106.
33. J. C. Newman and I. S. Raju (1986) Stress intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads. In: Computational Methods in the Mechanics of Fracture (Edited by S. N. Atluri), Vol. 2, Elsevier Science, Amsterdam.
34. D. M. Parks (1990) A surface crack review: elastic and elastic-plastic behavior. In: Surface Crack Growth: Models, Experiments and Structures, ASTM STP 1060, pp. 9-33.
35. X. R. Wu and A. J. Carlsson (1991) Weight Functions and Stress Intensity Factor Solutions, Pergamon Press, Oxford.
36. A. P. Parker (1981) The Mechanics of Fracture and Fatigue, E. & F. N. Spon, London.
37. H. Tada, P. C. Paris and G. R. Irwin (1985) The Stress Analysis of Cracks Handbook, Paris Production & Del Research, St. Louis, Missouri.