Biocompatibility of resin-modified filling materials

Critical Reviews in Oral Biology and Medicine

Volumn 11, Issue 3, 2000, Pages 333-355

  Geurtsen, W ^a  

^a HANNOVER MEDICAL SCHOOL   (Germany)

Author keywords

Adverse effects; Biocompatibility; Leaching; Resin based materials

Indexed keywords

2 HYDROXYETHYL METHACRYLATE; BENZOYL PEROXIDE; BIOMATERIAL; ETHYLENE GLYCOL DERIVATIVE; GLASS IONOMER; GLUTARALDEHYDE; METHACRYLIC ACID DERIVATIVE; MONOMER; RESIN; TOOTH CEMENT; TRIETHYLENE GLYCOL;

ALLERGIC REACTION; ARTICLE; BIOCOMPATIBILITY; CARCINOGEN TESTING; CYTOTOXICITY TEST; DEGRADATION; EROSION; GENOTOXICITY; HUMAN; HUMAN CELL; LEACHING; MUTAGEN TESTING; NONHUMAN; POLYMERIZATION; PRIORITY JOURNAL; SALIVA; TOOTH FILLING;

EID: 0033810704     PISSN: 10454411     EISSN: None     Source Type: Journal    
DOI: 10.1177/10454411000110030401     Document Type: Article

References (178)

1. Relationship between dentine hydraulic conductance and the cytotoxicity of four dentine bonding resins in vitro
2. Biocompatibility of Clearfil Liner Bond 2 and Clearfil AP-X system on nonexposed and exposed primate teeth
3. The reaction of skin to primers used in the 'single-step' bonding systems
4. Bisphenol-A dental sealants: The inappropriateness of continued reference to a single female patient
5. In vitro studies on the carcinogenic potential of orthodontic bonding materials
6. Cytotoxicity of photosensitizers camphorquinone and 9-fluorenone with visible light irradiation on a human submandibular-duct cell line in vitro
7. Material-specific and clinical assessment of compomers
8. The use of rabbit implants and tissue cell culture tests for the evaluation of dental material
9. General toxicity and screening tests for dental materials
10. Sensitizing potential of urethane (meth)acrylates in the guinea pig
11. The sensitizing capacity of multifunctional acrylates in the guinea pig
12. The sensitizing potential of di-(meth) acrylates based on bisphenol A or epoxy resin in the guinea pig
13. Response of the dental pulp to invasion of bacteria around three filling materials
14. Acid phosphatase activity as enzymatic assay of biomedical compatibility of polymers
15. Allergic contact dermatitis to bisphenol-A-glycidyl dimethacrylate (BIS-GMA) dental resin associated with sensitivity to epoxy resin
16. Tissue reactions to two composite resins
17. Sensitization potentials of methyl, ethyl, and n-butyl methacrylates and mutual cross-sensitivity in guinea pigs
18. Sensitizing potential of 2-hydroxyethylmethacrylate
19. Inhibition by glassionomer cements of protein synthesis by human gingival fibroblasts in continuous culture
20. Effects of adhesive resins and various dental cements on the pulp
21. Re-evaluating pulp protection: Calcium hydroxide liners vs. cohesive hybridization
22. Biocompatibility of primer, adhesive and resin composite systems on non-exposed and exposed pulps of non-human primate teeth
23. Human pulp response to a new composite system. Vytol composite restorative and bonding agent
24. Intraoral contact allergy: A literature review and case reports
25. Toxicity of methyl, ethyl and n-butyl methacrylate
26. Biocompatibility testing of restorative materials influencing dentin and pulp
27. Gingival response to class V composite resin restorations
28. Current concepts on adhesion to dentin
29. Meta-analysis on long-term clinical performance of posterior composite restorations
30. Biocompatibility of an enamel-dentin adhesive
31. Antibacterial activity of dentinal bonding agents
32. Support for and implications of the specific plaque hypothesis
33. Monkey pulpal response to composite restorations in cavities treated with various cleansing agents
34. Elution of leachable components from composites
35. Current trends in dental composites
36. Etude histologique de la reaction pulpaire a l'egard du nouveau materiaux d'obturation 3M Addent
37. Release of fluoride and other elements from light-cured glass ionomers in neutral and acidic conditions
38. In vitro evaluation of antibacterial effects of photo-cured glass ionomer liners and dentin bonding agents during setting
39. Resinmodified glass ionomer cements: Fluoride release and influence on Streptococcus mutans growth
40. Studies on hemolytic activity of bisphenol A diglycidyl methacrylate (Bis-GMA)
41. 13C NMR studies of the interaction of eugenol, phenol, and triethyleneglycol dimethacrylate with phospholipid liposomes as a model system for odontoblast membranes
42. Effect of acid etching on the dental pulp in adhesive composite restorations
43. Dentine permeability and tracer tests
44. Effect of hydrostatic pressure on the diffusion of monomers through dentin in vitro
45. Diffusion of monomers from bonding resin-resin composite combinations through dentine in vitro
46. Subcellular damage caused by the unfilled component systems of a composite
47. Studies on the cellular tolerance of posterior composites
48. Substances released from dental resin composites and glass ionomer cements
49. Biological aspects of root canal filling materials - Histocompatibility, cytotoxicity, and mutagenicity
50. A 4-year retrospective clinical study of class I and II composite fillings
51. Cytotoxicity of 35 dental resin composite monomers/additives in permanent 3T3 and three human primary fibroblast cultures
52. Residual monomer/additive release and variability in cytotoxicity of light-curing glass-ionomer cements and compomers
53. Effects of extraction media upon fluoride release from a resin-modified glass-ionomer cement
54. Variability of cytotoxicity and leaching of substances from four light-curing pit and fissure sealants
55. Effect of storage media on the fluoride release and surface microstructure of four polyacid-modified composite resins ('compomers')
56. Variability of cytotoxicity and leaching of substances from five dentin adhesives
57. Pulpal response to dentin etched with 10% phosphoric acid
58. Mechanisms of polymer degradation and erosion
59. Marginal seal and biocompatibility of a fourth-generation bonding agent
60. Early and intermediate time response of the dental pulp to an acid etch technique in vivo
61. Adverse reaction to a fissure sealant: Report of case
62. The effect of dentin thickness on diffusion of resin monomers in vitro
63. A study of component release from resin pit and fissure sealants in vitro
64. Variation in phosphoric acid concentration and treatment time and HEMA diffusion through dentin
65. Component release from light-activated glass ionomer and compomer cements
66. Cytotoxicity of dental composites and other materials in a new in vitro device
67. Cytotoxic effects of resin components on cultured mammalian fibroblasts
68. Effects of various resin composite (co)monomers and extracts on two caries-associated micro-organisms in vitro
69. Tissue biocompatibility of kevlar aramid fibers and polymethylmethacrylate composites in rabbits
70. Genotoxicity of dental materials
71. Mutagenic potential and influence on cell growth of single components of dental polymers
72. Hypersensitivity to methyl methacrylate: Mode of treatment
73. Monkey pulp reactions to restorative materials
74. The use of an improved rabbit ear chamber technique for the study of dental materials
75. A new technique for screening chemical toxicity to the pulp from dental restorative materials and procedures
76. Bioavailability of components of resin-based materials which are applied to teeth
77. Antibacterial activity of dentine primer containing MDPB after curing
78. Antibacterial activity of proprietary self-etching primers
79. Antibacterial activity of cured dental resin incorporating the antibacterial monomer MDPB and an adhesion-promoting monomer
80. Monkey pulpal responses to conventional and adhesive luting cements
81. Dentin desensitizing agents: SEM and x-ray microanalysis assessment
82. Threshold responses in formaldehyde-sensitive subjects
83. Allergy to dental materials with special reference to the use of amalgam and polymethylmethacrylate
84. An FITR study on the setting mechanism of resin-modified glass-ionomer restoratives
85. Incidence of adverse effects of dental materials
86. Variability in cytotoxicity and fluoride release of resin-modified glassionomer cements
87. Allergic contact dermatitis from dental composite resins due to aromatic epoxy acrylates and aliphatic acrylates
88. Active sensitization caused by 2-hydroxyethyl methacrylate, 2-hydroxypropyl methacrylate, ethyleneglycol dimethacrylate and N,N-dimethylaminoethyl methacrylate
89. Double active sensitization caused by acrylics
90. Dentist's occupational allergic contact dermatitis caused by coconut diethanolamide. N-ethyl-4-toluene sulfonamide and 4-tolyldiethanolamine
91. Occupational allergic contact dermatitis and composition of acrylates in dental bonding systems
92. Occupational skin allergy in the dental profession
93. Occupational allergic contact dermatitis from 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate in a modified acrylic structural adhesive
94. Methylmethacrylate monomer produces direct relaxation of vascular smooth muscle in vitro
95. The adverse effect of commercial dentine-bonding systems on the skin of guinea pigs
96. Formaldehyde release from dental materials
97. Composite filling materials in cell cultures
98. Comparative cell culture studies of the cytotoxicity of composite resin components
99. The genotoxic potential of composite components
100. Biocompatibility of various light-curing and one conventional glass-ionomer cement
101. Evaluation of mutagenicity of restorative dental materials using the Ames salmonella/microsome test
102. Oral lichenoid reactions related to composite restorations
103. Hand dermatitis and symptoms from the fingers among Swedish dental personnel
104. Adverse health reactions in skin, eyes, and respiratory tract among dental personnel in Sweden
105. Immortalized mouse odontoblast cell line M06-MG3 application for in vitro biocompatibility testing
106. The dentin substrate: Structure and properties related to bonding
107. An in vivo model for evaluating the response of pulp to various biomaterials
108. Compomers: Between glass-ionomer cements and composites
109. Mutagenic potential of some chemical components of dental materials
110. Longevity of posterior restorations
111. Cytotoxicity of urethane dimethacrylate composites before and after aging and leaching
112. Biocompatibility test of light-cured composites in vitro
113. Delayed extraoral hypersensitivity to dental composite material
114. In vitro elution of leachable components from dental sealants
115. Chemistry of glass-ionomer cements: A review
116. Estrogenicity of resin-based composites and sealants used in dentistry
117. Biocompatibility studies on glass ionomer cements by primary cultures of human osteoblasts
118. Further studies of polymers as carcinogenic agents in animals
119. Antibacterial activity of tooth-colored dental restorative materials
120. Water sorption and filler characteristics of composites for use in posterior teeth
121. Release of formaldehyde from dental composites
122. Pulp reaction to a dentin bonding agent
123. The disastrous effects of the 'total etch' technique in vital pulp capping in primates
124. Water sorption and solubility of resin-based materials following inadequate polymerization by a visible-light curing system
125. Comparison of the intraosseous biocompatibility of Dyract and Super EBA
126. The influence of direct composite additions for the correction of tooth form and/or position on periodontal health. A retrospective study
127. Cardiovascular effects of implanted acrylic bone cement
128. Dentin as inhibitor of bacterial toxicity on pulpal cells in vitro
129. The damaging effects of restorative materials
130. Pulpal reactions in human teeth to tooth coloured filling materials
131. Resin restorations: Leakage, bacteria, pulp
132. Human pulp reactions to resin restorations performed with different acidetch restorative procedures
133. Effects of bonding agents on macrophage mitochondrial activity
134. Cytotoxic interactive effects of dentin bonding components on mouse fibroblasts
135. Cytotoxicity of a Bis-GMA dental composite before and after leaching in organic solvents
136. Cytotoxicity evaluation of a new radiopaque resin additive-Triphenyl bismuth
137. Pulpal response to a new composite dental restorative material
138. Dental materials-a problem in allergy diagnosis? Part II: Patch testing and relevance evaluation in selected groups of dental materials
139. Dental materials-a problem in allergy diagnosis? Part I: Analysis of patch test results in patients with oral mucosal complaints or problems possibly related to denture materials
140. Clinical evaluation of a composite resin system with a dentin bonding agent for restoration of permanent posterior teeth: A 3-year study
141. Effect of different composites and amalgam on the gingiva
142. A histologic study of gingival tissue response to amalgam, silicate and resin restorations
143. Bovine dentin as a substitute for human dentin in shear bond strength measurements
144. Biological proof of filling materials in the Gotting miniature pig-a pilot study
145. Concepts in biocompatibility testing of dental restorative materials
146. Dental filling materials-hazards to patients and to environment - Introduction
147. An in vitro pulp chamber with three-dimensional cell cultures
148. Kontaktallergene bei Dentalberufen
149. Proximo-cervical adaptation of Class II-composite-restorations after thermocycling - A quantitative and qualitative study
150. Triethylene glycol dimethacryiate induces large deletions in the hprt gene of V79 cells
151. Mutagenicity of dentin bonding agents
152. Embryonic-fetal toxicity and teratogenic effects of a group of methacrylate esters in rats
153. Qualitative analysis by gas and liquid chromatography/mass spectrometry of dental resin composites
154. Determination of leachable components from four commercial dental composites by gas and liquid chromatography/mass spectrometry
155. Recommended standard practices for biological evaluation of dental materials
156. Local and systemic responses to dental composites and glass ionomers
157. Human pulp response to acid pretreatment of dentin and to composite restorations
158. Compatibility of various materials with oral tissues. II. Pulp responses to composite ingredients
159. In vitro sister chromatid exchange induced by glass ionomer cements
160. A new copolymerized composite resin system: A multiphased evaluation
161. In vitro inhibition of caries around a resin composite restoration containing antibacterial filler
162. Biocompatibility of Optibond and XR-Bond adhesive systems in nonhuman primate teeth
163. Lipid peroxidation as a possible cause of benzoyl peroxide toxicity in rabbit dental pulp-a microsomal lipid peroxidation in vitro
164. Pulpal reaction and microorganisms under Clearfil composite resin in deep cavities with acid etched dentin
165. Biologic tests of a methylmethacryiate composite material
166. In vitro assessment of the toxicity of filling materials
167. Allergy to dental materials
168. Biological testing of dental restorative materials
169. Determination of fluoride release from light-cured glass-ionomers and a fluoridated composite resin from the viewpoint of curing time
170. Antibacterial activity of dental restorative materials
171. Resin-modified glass ionomer cements (RM GICs): Implication for use in pediatric dentistry
172. The pulpal response to a direct filling resin without an inorganic filler-Isopast
173. Pit and fissure sealant application: Updating the technique
174. Biological evaluation of dental restorative materials - A comparison of different test methods
175. Pulpal response to adhesive systems applied to acid-etched vital dentin: Damp versus dry primer application
176. Five-year clinical study of a u.v.-polymerized posterior composite
177. Cytotoxic effects of acrylates and methacrylates: Relationships of monomer structures and cytotoxicity