Abrasive waterjet peening: A new method of surface preparation for metal orthopedic implants

Journal of Biomedical Materials Research

Volumn 53, Issue 5, 2000, Pages 536-546

  Arola, Dwayne D ^a   McCain, Mark L ^a  

^a University of Marylandw Baltimore County   (United States)

Author keywords

Abrasive waterjet; Fatigue; Prostheses; Residual stress; Titanium

Indexed keywords

FATIGUE OF MATERIALS; RESIDUAL STRESSES; SHOT PEENING; STRAIN HARDENING; STRESS CONCENTRATION; SURFACE TOPOGRAPHY; SURFACE TREATMENT; TEXTURES; TITANIUM ALLOYS; X RAY DIFFRACTION ANALYSIS;

ABRASIVE WATERJET PEENING; CEMENTLESS FIXATION; CONTACT PROFILOMETRY; METAL ORTHOPEDIC IMPLANTS; TOTAL JOINT ANTHROPLASTY;

IMPLANTS (SURGICAL);

METAL; TITANIUM;

ARTICLE; COMPRESSION; EROSION; IMPLANT; MECHANICAL STRESS; METAL IMPLANTATION; ORTHOPEDIC EQUIPMENT; PROSTHESIS; SURFACE PROPERTY; X RAY DIFFRACTION;

ALLOYS; MATERIALS TESTING; METALS; MICROSCOPY, ELECTRON, SCANNING; PROSTHESES AND IMPLANTS; SURFACE PROPERTIES; TITANIUM; WATER;

EID: 0033808830     PISSN: 00219304     EISSN: None     Source Type: Journal    
DOI: 10.1002/1097-4636(200009)53:5<536::AID-JBM13>3.0.CO;2-V     Document Type: Article

References (48)

1. Revision of aseptic loose total hip arthroplasties
2. Revision total hip arthroplasty
3. Long-term results of revision total hip replacement
4. Porous-coated hip replacement: The factors governing bone ingrowth, stress shielding, and clinical results
5. Prosthesis-bone interface
6. A light and electron microscope study of the effects of surface topography on the behavior of cells attached to titanium-coated percutaneous implants
7. Ingrowth surfaces: Plasma spray coating of titanium alloy hip replacements
8. Integral porous femoral stem. 5- to 8-year follow-up study
9. Average 12-year outcome of a chrome-cobalt, beaded, bony ingrowth acetabular component
10. Revision total hip arthroplasty using a cementless acetabular component
11. Clinical and radiographic outcome of a cementless, titanium, plasma spray-coated total hip arthroplasty femoral component: Justification for continuance of use
12. Primary total-hip reconstruction with a titanium fiber-coated prosthesis inserted without cement
13. Fatigue properties of carbon- and porous-coated Ti-6Al-4V alloy
14. Titanium and titanium alloy prostheses with porous structures for bone ingrowth: A general approach
15. The fatigue strength of porous-coated Ti-6%Al-4%V implant alloy
16. Porous-surfaced metallic implants for orthopaedic applications
17. The effect of post-sintering heat treatments on the fatigue properties of porous coated Ti-6Al-4V alloy
18. A parametric study of the factors effecting the fatigue strength of porous coated Ti-6Al-4V implant alloy
19. Retrieval analysis of porous-coated components for total knee arthroplasty
20. Fracture of the porous coated metal tray of a biologically fixed knee prosthesis
21. Producing and avoiding stress shielding: Laboratory and clinical observations of non-cemented total hip arthroplasty
22. The influence of stem size and extent of porous coating on femoral bone resorption after primary cementless total hip arthroplasty
23. A quantitative evaluation of periprosthetic bone-remodeling after cementless total hip arthroplasty
24. Mechanical consequences of bone ingrowth in a hip prosthesis inserted without cement
25. Mechanism of creation of compressive residual stress by shot peening
26. Material removal in abrasive waterjet machining of metals: A residual stress analysis
27. Water peening - An advanced application of waterjet technology
28. Material removal in abrasive waterjet machining of metals: Surface integrity and texture
29. Excessive metal release due to loosening and fretting of sintered particles on porous-coated hip prostheses
30. Differential effects of different forms of hydroxyapatite and hydroxyapatite/tricalcium phosphate particulates on human monocyte/macrophages in vitro
31. Isolation and characterization of wear particles generated in patients who have had failure of a hip arthroplasty without cement
32. Severe osteolysis after third-body wear due to hydroxyapatite particles from acetabular cup coating
33. Polyethylene wear, osteolysis and acetabular loosening with an HA-coated hip prosthesis. A follow-up of 94 consecutive arthroplasties
34. An examination of the effects from surface texture on the strength of fiber reinforced plastics
35. Fatigue design
36. Direct morphological comparison of vacuum plasma sprayed hydroxyapatite coatings for orthopedic applications
37. Plasma sprayed hydroxyapatite coatings on titanium substrates. Part I: Mechanical properties and residual stress levels
38. Plasma sprayed hydroxyapatite coatings on titanium substrates. Part II: Optimization of coating properties
39. Mechanical and chemical consequences of the residual stress in plasma sprayed hydroxy-apatite coatings
40. Residual stress measurement in thermal sprayed hydroxyapatite coatings
41. A theoretical consideration of the influence of surface profile on the measurement of stress using the X-ray diffraction method
42. Fatigue properties of cast and heat treated Ti-6Al-4V alloy for anatomic hip prostheses
43. The effect of heat treatment on the fatigue strength of microknurled Ti-6Al-4V
44. Effects of some technological aspects on the fatigue strength of a cementless hip system
45. Effect of porous coating geometry on interfacial stress under a shear load
46. Effect of a change in interfacial geometry on the fatigue strength in porous-coated Ti-6Al-4V