Progressive fatigue damage modeling of composite materials, Part I: Modeling

Journal of Composite Materials

Volumn 34, Issue 13, 2000, Pages 1056-1080

  Shokrieh, Mahmood M ^a   Lessard, Larry B ^b  

^a IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

^b MCGILL UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; FAILURE ANALYSIS; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; INTERFACES (MATERIALS); MATHEMATICAL MODELS; RESIDUAL STRESSES; STIFFNESS; STRENGTH OF MATERIALS; STRESS ANALYSIS; STRESS CONCENTRATION;

FATIGUE DAMAGE MODELS; RESIDUAL STRENGTH;

LAMINATED COMPOSITES;

EID: 0033726373     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1106/NCNX-DXP1-JT6A-E49E     Document Type: Article

References (66)

1. M. M. Shokrieh and L. B. Lessard, "Multiaxial Fatigue Behaviour of Unidirectional Plies Based on Uniaxial Fatigue Experiments: Part I. Modeling," International Journal of Fatigue, Vol. 19, No. 3, (1997), pp. 201-207.
2. M. M. Shokrieh and L. B. Lessard, "Multiaxial Fatigue Behaviour of Unidirectional Plies Based on Uniaxial Fatigue Experiments: Part II. Experimental Evaluation," International Journal of Fatigue, Vol. 19, No. 3, (1997), pp. 209-217.
3. M. M. Shokrieh, "Progressive Fatigue Damage Modeling of Composite Materials," Ph.D. Thesis. McGill University, Department of Mechanical Engineering, Montreal, Quebec, Canada, 1996.
4. W. W. Stinchcomb and K. L. Reifsnider, "Fatigue Damage Mechanisms in Composite Materials: A Review," Fatigue Mechanisms, Proceedings of an ASTM-NBS-NSF Symposium, J. T. Fong, Ed., ASTM STP 675, (1979), pp. 762-787.
5. K. L. Reifsnider, "Introduction," Fatigue of Composite Materials, Ed. by K. L. Reifsnider, (1990), pp. 1-9.
6. G. P. Sendeckyj, "Life Prediction for Resin-Matrix Composite Materials," Fatigue of Composite Materials, Ed. by K. L. Reifsnider, (1990), pp. 431-483.
7. G. M. Goetchius, "Fatigue of Composite Materials," Advanced Composite III, Expanding the Technology, Proceedings of the Third Annual Conference on Advanced Composites, (September 15-17, 1987), pp. 289-298.
8. D. S. Saunders and G. Clark, "Fatigue Damage in Composite Laminates," Materials Forum, 17, (1993), pp. 309-331.
9. W. W. Stinchcomb and C. B. Bakis, "Fatigue Behavior of Composite Laminates," Fatigue of Composite Materials, Ed. by K. L. Reifsnider, (1990), pp. 105-180.
10. M. J. Owen and P. T. Bishop. "Fatigue Properties of Glass-Reinforced Plastics Containing a Stress Concentrator," Journal of Physics-D: Applied Physics, Vol. 6, (1973), pp. 2057-2069.
11. F. H. Chang, D. E. Gordon, B. T. Rodini and R. H. McDaneil, "Real Time Characterization of Damage Growth in Graphite/Epoxy Laminates," Journal of Composite Materials, Vol. 10, (July 1976), pp. 182-192.
12. G. L. Roderick and J. D. Whitcomb, "Fatigue Damage of Notched Boron/Epoxy Laminates under Constant Amplitude Loading: Fatigue of Filamentary Materials, ASTM STP 636, K. L. Reifsnider and K. N. Lauraitis, Eds., (1977), pp. 73-88.
13. 3 Graphite/Epoxy Laminate," Fatigue of Filamentary Materials, ASTM STP 636, K. L. Reifsnider and K. N. Lauraitis, Eds., (1977), pp. 73-88.
14. M.N. Gibbins and W. W. Stinchcomb, "Fatigue Response of Composite Laminates with Internal Flaws," Composite Materials: Testing and Design (Sixth Conference), ASTM STP 787, I. M. Daniel, Ed., (1982), pp. 305-322.
15. T. Shimokawa and Y. Hamaguchi, "Distributions of Fatigue Life and Fatigue Strength in Notched Specimens of a Carbon Eight-Harness-Satin Laminate," Journal of Composite Materials, Vol. 17, (January 1983), pp. 64-76.
16. N. F. Black and W. W. Stinchcomb, "Compression Fatigue Damage in Thick, Notched Graphite/Epoxy Laminates," Long-Term Behavior of Composites, ASTM STP 813, T. K. O'Brien, Ed., (1983), pp. 95-115.
17. S. Kellas, J. Morton and S. M. Bishop, "Fatigue Damage Development in a Notched Carbon Fiber Composite," Composites Science and Technology, Vol. 25, (1986), pp. 311-323.
18. C. E. Bakis and W. W. Stinchcomb, "Response of Thick, Notched Laminates Subjected to Tension-Compression Cyclic Loads," Composite Materials: Fatigue and Fracture, ASTM STP 907, H. T. Hahn, Ed., (1986), pp. 314-334.
19. R. A. Simonds and W. W. Stinchcomb, "Response of Notched AS4/PEEK Laminates to Tension/Compression Loading," Advances in Thermoplastic Matrix Composite Materials, ASTM STP 1044, G. M. Newaz, Ed., (1989), pp. 133-145.
20. C. E. Bakis, R. A. Simonds and W. W. Stinchcomb, "A Test Method to Measure the Response of Composite Materials Under Reversed Cyclic Loads," Test Methods for Design Allowables for Fibrous Composites, ASTM STP 1003, C. C. Chamis and K. L. Reifsnider, Eds., (1989), pp. 93-110.
21. J. Xiao and C. Bathias, "Fatigue Behaviour of Unnotched and Notched Woven Glass/Epoxy Laminates," Composites Science and Technology, 50, (1994), pp. 141-148.
22. J. Xiao and C. Bathias, "Fatigue Damage and Fracture Mechanism of Notched Woven Laminates," Journal of Composite Materials, Vol. 28, No. 12, (1994), pp. 1127-1139.
23. S. Kellas, J. Morton and P. T. Curtis, "A Characteristic Fatigue Parameter for Notched Composites," International Journal of Fatigue, 13, No. 1, (1991), pp. 35-43.
24. s Laminates," Composite Materials: Fatigue and Fracture, Second Volume. ASTM STP 1012, P. A. Lagace, Ed., (1989), pp. 45-65.
25. J. D. Whitcomb, "Experimental and Analytical Study of Fatigue Damage in Notched Graphite/Epoxy Laminates," Fatigue of Fibrous Composite Materials, ASTM STP 723, (1981), pp. 46-63.
26. G. Shen, G. Glinka and A. Plumtree, "Fatigue Life Prediction of Notched Composite Components," Fatigue & Fracture of Engineering Materials & Structures, Vol. 17, No. 1, (1994), pp. 77-91.
27. S. V. Kulkarni, P. V. McLaughlin, Jr., R. B. Pipes and B. W. Rosen, "Fatigue of Notched Fiber Composite Laminates: Analytical and Experimental Evaluation," Composite Materials: Testing and Design (Fourth Conference), ASTM STP 617, (1977), pp. 70-92.
28. P. V. McLaughlin, Jr., S. V. Kulkarni, S. N. Huang and B. W. Rosen, "Fatigue of Notched Fiber Composite Laminates, Part I: Analytical Model," Technical Report, NASA CR-132747, National Aeronautics and Space Administration, Langley Research Center, Hampton, Va., March, 1975.
29. S. V. Kulkarni, P. V. McLaughlin, Jr. and R. B. Pipes, "Fatigue of Notched Fiber Composite Laminates, Part I: Analytical and Experimental Evaluation," Technical Report, NASA CR-145039, National Aeronautics and Space Administration, Langley Research Center, Hampton, Va., 1976.
30. R. L. Ramkumar, S. V. Kulkarni and R. B. Pipes, "Evaulation and Expansion of an Analytical Model for Fatigue of Notched Composite Laminates," Technical Report, NASA CR-132747, National Aeronautics and Space Administration, Langley Research Center, Hampton, Va., March 1978.
31. E. A. Humphreys and B. W. Rosen, "Development of a Realistic Stress Analysis for Fatigue Analysis of Notched Composite Laminates," Technical Report, NASA CR-159119, National Aeronautics and Space Administration, Langley Research Center, Hampton, Va., May 1979.
32. K. L. Reifsnider and W. W. Stinchcomb, "A Critical-Element Model of the Residual Strength and Life of Fatigue-Loaded Composite Coupons," Composite Materials: Fatigue and Fracture, ASTM STP 9007, H. T. Hahn, Ed., (1986), pp. 298-313.
33. K. L. Reifsnider, "The Critical Element Model: A Modeling Philosophy," Engineering Fracture Mechanics, Vol. 25, Nos. 5/6, (1986), pp. 793-749.
34. K. L. Reifsnider, "Damage and Damage Mechanics," Fatigue of Composite Materials, Ed. by K. L. Reifsnider, (1990), pp. 11-77.
35. S. M. Spearing and P. W. R. Beaumont, "Fatigue Damage Mechanics of Composite Materials. I: Experimental Measurement of Damage and Post-Fatigue Properties," Composites Science and Technology, No. 44, (1992), pp. 159-168.
36. S. M. Spearing and P. W. R. Beaumont, "Fatigue Damage Mechanics of Composite Materials. II: A Damage Growth Model," Composites Science and Technology, No. 44, (1992), pp. 169-177.
37. S. M. Spearing and P. W. R. Beaumont, "Fatigue Damage Mechanics of Composite Materials. III: Prediction of Post Fatigue Strength," Composites Science and Technology, No. 44, (1992), pp. 299-307.
38. S. M. Spearing and P. W. R. Beaumont, "Fatigue Damage Mechanics of Composite Materials. IV: Prediction of Post Fatigue Stiffness," Composites Science and Technology, No. 44, (1992), pp. 309-317.
39. J. C. Halpin, K. L. Jerina and T. A. Johnson, "Characterization of Composites for the Purpose of Reliability Evaluation," Analysis of the Test Methods for High Modulus Fibers and Composites, ASTM STP 521, (1973), pp. 5-64.
40. M. M. Shokrieh, Failure of Laminated Composites Pinned Connections, Masters Thesis, Department of Mechanical Engineering, McGill University, Montreal, Canada, 1991.
41. L. B. Lessard and M. M. Shokrieh, "Pinned Joint Failure Mechanisms, Part I-Two Dimensional Modeling," CANCOM 91, First Canadian International Composites Conference and Exhibition, Montréal, Québec, Canada, (September 4-6, 1991), pp. 1D51-1D58.
42. F. K. Chang and K. Y. Chang, "Post-Failure Analysis of Bolted Composite Joints in Tension or Shear-Out Mode Failure," Journal of Composite Materials, (1987), pp. 809-833.
43. J. H. Crews, Jr., "Bolt-Bearing Fatigue of a Graphite/Epoxy Laminate," Joining of Composite Materials, ASTM STP 749, K. T. Kedwards, Ed., (1981), pp. 131-144.
44. R. L. Ramkumar, "Bolted Joint Design," Test Methods and Design Allowables for Fibrous Composites, C. C. Chamis, Ed., ASTM STP 734, (1981), pp. 376-395.
45. R. L. Ramkumar and W. Tossavainen, "Strength and Lifetime of Bolted Laminate," Fatigue in Mechanically Fastened Composite and Metallic Joints, ASTM STP 927, (1986), pp. 251-273.
46. P. A. Smith and K. J. Pascoe, "Fatigue of Bolted Jointed in [0/90] CFRP Laminates," Composites Science and Technology, Vol. 29, (1987), pp. 45-69.
47. P. D. Herrington and M. Sabbaghian, "Fatigue Failure of Composite Bolted Joints," Journal of Composite Materials, Vol. 27, No. 5, (1993), pp. 491-512.
48. H. T. Hahn and S. W. Tsai, "Nonlinear Elastic Behavior of Unidirectional Composite Laminae," Journal of Composite Materials, Vol. 7, (1973), pp. 102-118.
49. N. J. Pagano and S. R. Soni, "Models for Studying Free-Edge Effects," Interlaminar Response of Composite Materials, Ed. by N. J. Pagano, (1989), pp. 1-68.
50. M. M. Shokrieh and L. B. Lessard, "Effects of Material Nonlinearity on the Three-Dimensional Stress State of Pin-Loaded Composite Laminates," Journal of Composite Materials, Vol. 30, No. 7, (1995), pp. 839-861.
51. Y. S. Garud, "Multiaxial Fatigue: A Survey of the State of the Art," Journal of Testing and Evaluation, JTEVA, Vol. 9, No. 3, (May, 1981), pp. 165-178.
52. P. H. Francis, D. E. Walrath, D. F. Sims and D. N. Weed, "Biaxial Fatigue Loading of Notched Composites," Journal of Composite Materials, Vol. 11, (1977), pp. 488-501.
53. M. J. Owen and D. J. Rice, "Biaxial Strength Behaviour of Glass Fabric Reinforced Polyester Resins," Composites, (January 1981), pp. 13-25.
54. M. S. Found, "A Review of the Multiaxial Fatigue Testing of Fiber Reinforced Plastics," Multiaxial Fatigue, ASTM STP 853, K. J. Miller and M. W. Brown, Eds., (1985), pp. 381-395.
55. A. S. Chen and F. L. Matthews, "A Review of Multiaxial Biaxial Loading Tests for Composite Materials," Composites, Vol. 24, No. 5, (1993), pp. 395-406.
56. D. F. Sims and V. H. Brogdon, "Fatigue Behavior of Composites under Different Loading Modes," Fatigue of Filamentary Materials, ASTM STP 636, K. L. Reifsnider and K. N. Lauraitis. Eds., (1977), pp. 185-205.
57. H. T. Hahn, "Fatigue Behavior and Life Prediction of Composite Laminates," Composite Materials: Testing and Design (Fifth Conference), ASTM STP 674, S. W. Tsai, Ed., (1979), pp. 383-417.
58. Z. Hashin, "Fatigue Failure Criteria for Unidirectional Fiber Composites," Journal of Applied Mechanics, Vol. 48, (December 1981), pp. 846-852.
59. Z. Hashin, "Fatigue Failure Criteria for Combined Cyclic Stress," International Journal of Fracture, Vol. 17, No. 2, (April 1981), pp. 101-109.
60. A. Rotem and Z. Hashin, "Fatigue Failure of Angle Ply Laminates," AIAA Journal, Vol. 14, No. 6, (July 1976), pp. 868-872.
61. J. T. Ryder and F. W. Crossman, "A Study of Stiffness, Residual Strength and Fatigue Life Relationships for Composite Laminates," NASA Contract Report CR-172211, 1983.
62. Z. Hashin, "Failure Criteria for Unidirectional Fiber Composites," Journal of Applied Mechanics, Vol. 47, (1980), pp. 329-334.
63. T. Adam, R. F. Dickson, G. Fernando, B. Harris, and H. Reiter, "The Fatigue Behaviour of Kevlar/Carbon Hybrid Composites," IMechE Conference Publications (Institute of Mechanical Engineers), Vol. 2, 1986, pp. 329-335.
64. T. Adam, R. F. Dickson, C. J. Jones, H. Reiter, and B. Harris, "A Power Law Fatigue Damage Model for Fiber-Reinforced Plastic Laminates," Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, Vol. 200, No. C3, 1986, pp. 155-166.
65. T. Adam, G. Fernando, R. F. Dickson, H. Reiter, and B. Harris, "Fatigue Life Prediction for Hybrid Composites,Int. J. Fatigue, Vol. 11, No. 4, 1989, pp. 233-237.
66. M. M. Shokrieh and L. B. Lessard, "Progressive Fatigue Damage Modeling of Composite Materials. Part II: Material Characterization and Model Verification," Journal of Composite Materials, this issue, pp. 1081-1116.