Requirements of a next step large steady state tokamak

Nuclear Fusion

Volumn 40, Issue 6, 2000, Pages 1197-1221

  Janeschitz, G ^a   Barabaschi, P ^a   Federici, G ^a   Ioki, K ^a   Ladd, P ^a   Mukhovatov, V ^b   Sugihara, M ^a   Tivey, R ^a  

^a International Thermonuclear Experimental Reactor ITER Garching   (Germany)

^b ITER Naka Joint Work Site   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ASPECT RATIO; BOUNDARY CONDITIONS; COSTS; DESIGN; PLASMAS;

BOOTSTRAP CURRENT; DIVERTOR OPERATION COMPATIBILITY; HIGH PLASMA SHAPING; HYBRID DISCHARGES; LARGE STEADY STATE TOKAMAK; MACHINE LAYOUTS;

TOKAMAK DEVICES;

EID: 0033714630     PISSN: 00295515     EISSN: None     Source Type: Journal    
DOI: 10.1088/0029-5515/40/6/316     Document Type: Article

References (71)

1. INTOR, Phase Two A, Part III, IAEA, Vienna (1988).
2. ITER CDA Final Report, IAEA, Vienna (1991).
3. ITER EDA Interim Report, IAEA, Vienna (1997).
4. Aymar, R., et al., in Fusion Energy 1996 (Proc. 16th Int. Conf. Montreal, 1996), Vol. 1, IAEA, Vienna, (1997) 3.
5. Seki, Y., et al., in Plasma Physics and Controlled Nuclear Fusion Research 1990 (Proc. 13th Int. Conf. Washington, DC, 1990), Vol. 3, IAEA, Vienna (1991) 473.
6. Technical Basis for the ITER Final Design Report, Cost Review and Safety Analysis, (FDR) ITER Documentation Series No. 16, IAEA, Vienna (1998).
7. Söldner, F.X., Plasma Phys. Control. Fusion 39 (1997) B353.
8. Fujita, T., et al., Phys. Rev. Lett. 78 (1997) 2377.
9. Wolf, R.C., et al., IAEA-CN-69/EXP1/12, paper presented at 17th IAEA Conf. on Fusion Energy, Yokohama, 1998.
10. Lazarus, E.A., et al., Nucl. Fusion 37 (1997) 7.
11. Synakowski, E.J., et al., Phys. Plasmas 4 (1997) 1736.
12. ITER Special Working Group Report, Garching (1999).
13. ITER Physics Basis, Nucl. Fusion 39 (1999) 2137.
14. Janeschitz, G., et al., in Controlled Fusion and Plasma Physics (Proc. 26th Eur. Conf. Maastricht, 1999), Vol. 23J, European Physical Society, Geneva (1999) 1445.
15. ITER Expert Group on Confinement Database, paper presented at 7th IAEA TCM on H mode and Transport Barrier Physics, Oxford, 1999.
16. Saibene, G., et al., Nucl. Fusion 39 (1999) 1133.
17. Stober, J., et al., in Controlled Fusion and Plasma Physics (Proc. 26th Eur. Conf. Maastricht, 1999), Vol. 23J, European Physical Society, Geneva (1999) 1401.
18. Gruber, O., et al., Nucl. Fusion 39 (1999) 1321.
19. Kamada, Y., et al., Nucl. Fusion 39 (1999) 1845.
20. Sugihara, M., Igitkhanov, Y., Janeschitz, G., "Pedestal width scaling", Nucl. Fusion (in press).
21. Ozeki, T., et al., Nucl. Fusion 30 (1990) 1425.
22. Kamada, Y., et al. Plasma Phys. Control. Fusion 38 (1996) 1387.
23. Lin-Liu, Y.R., et al. Rep. A22964, General Atomics San Diego, CA (1998).
24. Turnbull, A.D., et al., in Fusion Energy 1996 (Proc. 16th Int. Conf. Montreal, 1996). Vol. 2, IAEA, Vienna (1997) 509.
25. Zolim, H., et al., in Controlled Fusion and Plasma Physics (Proc. 26th Eur. Conf. Maastricht, 1999), Vol. 23J, European Physical Society, Geneva (1999) 1373.
26. Garofalo, A.M., et al., paper presented at 2nd IAEA TCM on Steady-State Operation of Magnetic Fusion Devices, Fukuoka, 1999.
27. Chan, V., et al., Nucl. Fusion 40 (2000) 1137.
28. Challis, C.D., et al., in Controlled Fusion and Plasma Physics (Proc. 26th Eur. Conf. Maastricht, 1999), Vol. 23J, European Physical Society, Geneva (1999) 69.
29. Kamada, Y., et al., paper presented at 7th IAEA TCM on H mode and Transport Barrier Physics, Oxford, 1999.
30. Janeschitz, G., et al., Fusion Eng. Des. (in press).
31. Kukushkin, A., et al., in Controlled Fusion and Plasma Physics (Proc. 26th Eur. Conf. Maastricht, 1999), Vol. 23J, European Physical Society, Geneva (1999) 1545.
32. Sakasai, A., et al., IAEA-CN-69/EX615, paper presented at 17th IAEA Conf. on Fusion Energy, Yokohama, 1998.
33. Matsumoto, H., et al., Fusion Technol. (in press).
34. Mukhovatov, V., et al, "RTO/RC-ITER plasma performance: inductive and steady state operation", paper presented at 7th IAEA TCM on H mode and Transport Barrier Physics, Oxford, 1999.
35. Boucher, D., et al., in Advances in Simulations and Modelling of Thermonuclear Plasmas (Proc. IAEA TCM Montreal, 1992), IAEA, Vienna (1992) 142.
36. Ishida, S., et al., Phys. Rev. Lett. 79 (1997) 917.
37. Taylor, T.S., et al., IAEA-CN-69/OV-1/3, paper presented at 17th IAEA Conf. on Fusion Energy, Yokohama, 1998.
38. Fujisawa, N., et al., paper presented at IAEA TCM on Steady-State Operation of Magnetic Fusion Devices, Fukuoka, 1999.
39. ITER FEAT Outline Design Report, ITER EDA Documentation Series, IAEA, Vienna (in press).
40. Kuan, W., Federici, G., Gieszwerski, P., Sugihara, M., in Fusion Engineering (Proc. 17th Symp. San Diego, 1997), Vol. 1, IEEE, Piscataway, NJ (1998) 325.
41. Borrass, K., Janeschitz, G., Nucl. Fusion 34 (1994) 1203.
42. Janeschitz, G., et al., J. Nucl. Mater. 220-222 (1995) 73.
43. Reiter, D., May, C., Coster, D., Schneider, R., J. Nucl. Mater. 220-222 (1995) 987.
44. Braams, B., Rep. EUR-FU/XII-80-87-68, NET, Garching (1987).
45. Rognlien, T.D., Milovich, J.L., Rensink, M.E., Porter, G.D., J. Nucl. Mater. 196-198 (1992) 347.
46. Simonini, R., et al., J. Nucl. Mater. 196-198 (1992) 369.
47. Cupini, E., De Matteis, A., Simonini, R., Hotston, E.S., Harrison, M.F.A., Rep. EUR-XII-324-26/NET-NR. 26, Comm. of the Eur. Communities, Brussels/Next European Torus, Garching (1984).
48. Pacher, H.D., et al., J. Nucl. Mater. 266-269 (1999) 1172.
49. Ibbott, C., et al., Fusion Eng. Des. (in press).
50. Barabash, V., et al., in Fusion Technology (Proc. 20th Symp. Marseille, 1998), Vol. 1, Assoc. Euratom-CEA/Cadarache (1998) 215.
51. Vieider, G., et al., "European development of prototypes for ITER high heat flux components", Fus. Eng. Des. (in press).
52. Suzuki, S., et al., "Thermal fatigue damage of the ITER divertor plate", Fus. Eng. Des. (in press).
53. Chappuis, P., et al., paper presented at 2nd IAEA TCM on Solid-State Operation of Magnetic Fusion Devices, Fukuoka, 1999.
54. Krieger, K., Maier, H., Neu, R., ASDEX Upgrade Team, J. Nucl. Mater. 266-269 (1999) 207.
55. Federici, G., et al., "Issues arising from plasma-wall interactions in reactor class tokamaks", Nucl. Fusion (in press).
56. Brooks, J.N., Nucl. Technol./Fusion 4 (1983) 33.
57. Brooks, J.N., Phys. Fluids 8 (1990) 1858.
58. Najouks, D., Behrisch, R., Coad, J.P., deKock, L., Nucl. Fusion 33 (1993) 581.
59. Goebel, D.M., et al., Nucl. Fusion 28 (1988) 1041.
60. Grote, H., et al., J. Nucl. Mater. 266-269 (1999) 1059.
61. Jacob, W., Thin Solid Films 326 (1998) 1.
62. von Keudell, A., Hopf, C., Schwarz-Selinger, T., Jacob, W., Nucl. Fusion 39 (1999) 1451.
63. Ioki, K., et al., "First wall-blanket and vacuum vessel for RTO/RC-ITER", Fusion Eng. Des. (in press).
64. Ioki, K., et al., "Design and fabrication methods of FW/blanket, divertor and vacuum vessel for ITER". J. Nucl. Mater. (in press).
65. Cardella, A., et al., Fusion Eng. Des. 43 (1998) 75.
66. Barabash, V., et al., in Fusion Technology (Proc. 20th Symp. Marseille, 1998), Vol. 1, Assoc. Euratom-CEA/Cadarache (1998) 215.
67. Lister, J.B., et al., Nucl. Fusion 40 (2000) 1167.
68. Mukhovatov, V.S., et al., Role and Requirements for Plasma Measurements on ITER, Diagnostics for Experimental Thermonuclear Fusion Reactors 2, Plenum Press, New York and London (1998) 25.
69. Janeschitz, G., et al., "Integration of diagnostics into the ITER machine", paper presented at 17th IAEA Conf. on Fusion Energy, Yokohama, 1998.
70. Costley, A.E., et al., in Controlled Fusion and Plasma Physics (Proc. 26th Eur. Conf. Maastricht, 1999), Vol. 23J, European Physical Society, Geneva (1999) 489.
71. Voitsenya, V.S., et al. Fusion Eng. Des. 34&35 (1997) 365.