Efficient mixing of polymer blends of extreme viscosity ratio: Elimination of phase inversion via solid-state shear pulverization

Polymer Engineering and Science

Volumn 40, Issue 6, 2000, Pages 1447-1457

  Furgiuele, Naomi ^a   Lebovitz, Andrew H ^a   Khait, Klementina ^a   Torkelson, John M ^a  

^a Northwestern University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMMINUTION; MIXING; MOLECULAR WEIGHT; MORPHOLOGY; PHASE TRANSITIONS; POLYETHYLENES; POLYSTYRENES; VISCOSITY;

MELT MIXING; PHASE INVERSION; SOLID STATE SHEAR PULVERIZATION;

POLYMER BLENDS;

EID: 0033705551     PISSN: 00323888     EISSN: None     Source Type: Journal    
DOI: 10.1002/pen.11274     Document Type: Article

References (69)

1. C. Rauwendaal, Mixing in Polymer Processing, M. Dekker, New York (1991).
2. Z. Tadmor and C. G. Gogos, Principles of Polymer Processing, Wiley, New York (1979).
3. J. Randolph, Mixing in the Chemical and Allied Industries, Noyes, Park Ridge, N.J. (1967).
4. D. R. Paul and J. W. Barlow, J. Macromol. Sci.: Rev., C18, 109 (1980).
5. M. Minale, P. Moldenaers, and J. Mewis, Macromolecules, 30, 5470 (1997).
6. S. Wu, Polym. Eng. Sci., 27, 335 (1987).
7. B. David, M. Kozlowski, and Z. Tadmor, Polym. Eng. Sci., 33, 227 (1993).
8. C. G. Gogos, M. Esseghir, D. B. Todd, and D. W. Yu, Macromol. Symp., 101, 185 (1996).
9. A. Adediji, A. M. Jamieson, and S. D. Hudson, Macromolecules, 28, 5255 (1995).
10. G. I. Taylor, Proc. R. Soc. Lond., A146, 501 (1934).
11. H. P. Grace, Chem. Eng. Commun., 14, 225 (1982).
12. J. M. Ottino and R. Chella, Polym. Eng. Sci., 23, 357 (1983).
13. M. Tjahjadi and J. M. Ottino, J. Fluid Mech., 232, 191 (1991).
14. P. H. M. Elemans, J. M. van Wunnik, and R. A. van Dam, AIChE J., 43, 1649 (1997).
15. J. M. H. Jannsen and H. E. H. Meijer, Polym. Eng. Sci., 35, 1766 (1995).
16. U. Sundararaj, C. W. Macosko, R. J. Rolando, and H. T. Chan, Polym. Eng. Sci., 32, 1814 (1992).
17. U. Sundararaj, Y. Don, and C. W. Macosko, Polymer, 36, 1957 (1995).
18. C. E. Scott and C. W. Macosko, Polymer, 36, 461 (1995).
19. C. E. Scott and C. W. Macosko, Polym. Bull., 26, 341 (1991).
20. L. A. Utracki and Z. H. Shi, Polym. Eng. Sci., 32, 1824 (1992).
21. M. A. Huneault, Z. H. Shi, and L. A. Utracki, Polym. Eng. Sci., 35, 115 (1995).
22. J. M. H. Janssen and H. E. H. Meijer, J. Rheol., 37, 597 (1993).
23. M. H. Mack, ANTEC '89, 35, 120 (1989).
24. F. Burbank, F. Brauer, and P. Andersen, ANTEC '91, 37, 149 (1991).
25. G. M. Jordhamo, J. A. Manson, and L. H. Sperling, Polym. Eng. Sci., 26, 517 (1986).
26. I. S. Miles and A. Zurek, Polym. Eng. Sci., 28, 796 (1988).
27. C. E. Scott and S. K. Joung, Polym. Eng. Sci, 36, 1666 (1996).
28. B. D. Davis and J. P. Chalifoux, Polymer, 29, 1761 (1988).
29. I. Fortelny and J. Kovar, Eur. Polym. J., 28, 85 (1992).
30. P. Cassagnau, T. Nietsch, M. Bert, and A. Michel, Polymer, 40, 131 (1998).
31. C.-K. Shih, D. G. Tynan, and D. A. Denelsbeck, Polym. Eng. Sci. 31, 1670 (1991).
32. C.-K. Shih, Polym. Eng. Sci., 35, 1688 (1995).
33. C.-K. Shih, Plast. Eng., 54, 49 (1998).
34. U. Sundararaj, C. W. Macosko, and C.-K. Shih, Polym. Eng. Sci. 36, 1769 (1996).
35. R. Ratnagiri and C. E. Scott, Polym. Eng. Sci., 38, 1751 (1998).
36. S. H. Lee and J. L. White, Int. Polym. Proc., 12, 316 (1997).
37. J. K. Lee and C. D. Han, Polymer, 40, 2521 (1999).
38. M. Minale, J. Mewis, and D. Moldenauers, AIChE J., 44, 943 (1998).
39. B. Majumder, D. R. Paul, and A. J. Oshinski, Polymer, 38, 1787 (1997).
40. K. Khait and J. M. Torkelson, Polym.-Plast. Technol. Eng., 38, 445 (1999).
41. S. A. Wolfson, K. Khait, and M. Dienst, Mod. Plast., 71, 63 (1994).
42. N. S. Enikolopian, Pure Appl. Chem., 57, 1707 (1985).
43. S. A. Wolfson and V. G. Nikolskii, Polym. Sci. USSR Ser. B. 36, 861 (1994).
44. N. S. Enikolopian, Ye. L. Akopyan, A. Yu. Karmilov, V. G. Nikolskii, and A. M. Kharchatryan, Polym. Sci. USSR, 30, 2576 (1988).
45. P. W. Bridgman, Phys. Rev., 48, 825 (1935).
46. C. Suryanarayana and F. H. Froes, Adv. Mater., 5, 96 (1993).
47. J. S. Benjamin, Metall. Trans., 1, 2943 (1970).
48. P. S. Gilman and J. S. Benjamin, Annu. Rev. Mater. Sci., 13, 279 (1983).
49. E. Gaffet, M. Abdellaoui, and N. Malhouroux-Gaffet, Mater. Trans., JIM, 36, 198 (1995).
50. C. C. Koch, Mater. Sci. Eng. A, 244, 39 (1998).
51. C. C. Koch, Annu. Rev. Mater. Sci., 19, 121 (1989).
52. N. Furgiuele, K. Khait, and J. M. Torkelson, Polym. Mater. Sci. Eng., 79, 70 (1998).
53. N. Furgiuele, K. Khait, and J. M. Torkelson, Polym. Preprints, 40(2), 752 (1999).
54. N. Furgiuele, A. H. Lebovitz, K. Khait, and J. M. Torkelson, Macromolecules, 33, 225 (2000).
55. D. Ann, K. Khait, and M. A. Petrich, J. Appl. Polym. Sci., 55, 1431 (1995).
56. S. Dieter, Haake representative, personal communication.
57. R. B. Bird, R. C. Armstrong, and O. Hassager, Dynamics of Polymeric Liquids: Vol 1 Fluid Mechanics, Wiley, New York (1987).
58. C. W. Macosko, Rheology: Principles, Measurements, and Applications. VCH Publ., New York (1994).
59. A. Gonzalez-Montiel, H. Keskkula, and D. R. Paul, Polymer, 36, 4621 (1995).
60. M. Sakaguchi and M. Sohma, J. Polym. Sci. Part A-2, Polym. Phys., 13, 1233 (1975).
61. J. Sohma, Prog. Polym. Sci., 14, 451 (1989).
62. J. A. Koutsky, A. G. Walton, and E. Baer, J. Appl. Phys., 38, 1832 (1967).
63. H. Frensch, P. Harnishfeger, and B.-J. Jungnickel, ACS Symp. Ser., 395, 101 (1989).
64. M. L. Arnal, M. E. Matos, R. A. Morales, O. O. Santana, and A. J. Muller, Macromol. Chem. Phys., 199, 2275 (1998).
65. A. H. Lebovitz, M. Anguiano, K. Khait, and J. M. Torkelson, manuscript in preparation.
66. A. Smith, R. J. Spontak, H. Ade, S. D. Smith, and C. C. Koch, Adv. Mater., 11, 1277 (1999).
67. A. P. Smith, C. Bai, H. Ade, R. J. Spontak, C. M. Balik, and C. C. Koch, Macromol. Chem. Rapid Commun., 19, 557 (1998).
68. J. Rhee and B. Crist, J. Polym. Sci.: Part B-Polym. Phys., 32, 159 (1994).
69. M. D. Elkovitch, D. L. Tomasko, and L. J. Lee, Polym. Eng. Sci., 39, 2075 (1999).