Review of process planning techniques in layered manufacturing

Rapid Prototyping Journal

Volumn 6, Issue 1, 2000, Pages 18-35

  Kulkarni, Prashant ^a   Marsan, Anne ^a   Dutta, Debasish ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

PROCESS ENGINEERING; RAPID PROTOTYPING; STRATEGIC PLANNING;

PROCESS PLANNING METHODS;

LAYERED MANUFACTURING;

EID: 0033683532     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552540010309859     Document Type: Article

References (84)

1. Kruth, J.P., "Material incress manufacturing by rapid prototyping techniques", Annals of the CIRP, Vol. 40 No. 2, 1991, pp. 603-14.
2. McMains, S.A., Rapid Prototyping of Solid Three-Dimensional Parts, Master's project, University of California, Berkeley, CA, 1995.
3. Kochan, D., Solid Freeform Manufacturing, Elsevier, Amsterdam, 1993, p. 123.
4. Yan, X. and Gu, P., "A review of rapid prototyping technologies and systems", Computer Aided Design, Vol. 28 No. 4, 1996, pp. 307-18.
5. Chua, C.K., Chou, S.M. and Wong, T.S., "A study of the state-of-the-art rapid prototyping technologies", The International Journal of Advanced Manufacturing Technology, Vol. 14, 1998, pp. 146-52.
6. Jacobs, P.F., Rapid Prototyping and Manufacturing, McGraw-Hill, New York, NY, 1992.
7. Marsan, A. and Dutta, D., "A survey of process planning techniques for layered manufacturing", Proceedings of the 1997 ASME Design Automation Conference, Sacramento, CA, September 1997.
8. Sreeram, P.N. and Dutta, D., "Determination of optimal orientation based on variable slicing thickness in layered manufacturing", Proceedings of the 1995 ASME Winter Annual Conference, San Francisco, CA, November 1995.
9. Allen, S. and Dutta, D., "On the computation of part orientation using support structures in layered manufacturing", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1994, University of Texas, Austin, 1994, pp. 259-69.
10. Bablani, M. and Bagchi, A. "Quantification of errors in rapid prototyping processes, and determination of preferred orientation of parts", Transactions of the North American Manufacturing Research Institution of the SME, Vol. XXIII, SME, Houghton, MI, May 1995, pp. 319-24.
11. Frank, D. and Fadel, G., "Preferred direction of build for rapid prototyping processes", in Chartoff, R.P., Lightman, A.J. and Schenk, J.A. (Eds), Proceedings of the 5th International Conference on Rapid Prototyping, University of Dayton, June 1994, pp. 191-200.
12. Frank, D. and Fadel, G., "Expert system-based selection of the preferred direction of build for rapid prototyping processes", Journal of Intelligent Manufacturing, Vol. 6 No. 5, October 1995, pp. 339-45.
13. Thompson, D.C. and Crawford, R.H., "Optimizing part quality with orientation", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1995, University of Texas, Austin, August 1995.
14. Suh, Y.S. and Wozny, M.J., "Integration of a solid freeform fabrication process into a feature-based CAD system environment", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1995, University of Texas, Austin, August 1995.
15. Lan, P.-T., Chou, S.-Y., Chen, L.-L. and Gemmill, D., "Determining fabrication orientations for rapid prototyping with stereolithography apparatus", Computer Aided Design, Vol. 29 No. 1, 1997, pp. 53-62.
16. Cheng, W., Fuh, J.Y.H., Nee, A.Y.C., Wong, Y.S., Logh, H.T. and Miyazawa, T., "Multi-objective optimization of part building orientation in stereolithography", Rapid Prototyping Journal, Vol. 1 No. 4, 1995, pp. 12-23.
17. Wodziak, J.R., Fadel, G.M. and Kirschman, C., "A genetic algorithm for optimizing multiple part placement to reduce build time", in Chartoff, R.P., Lightman, A.J. and Schenk, J.A. (Eds), Proceedings of the 5th International Conference on Rapid Prototyping, University of Dayton, June 1994, pp. 201-10.
18. Beascoechea, A. and Wozny, M.J., "On three-dimensional heuristic packing for solid freeform fabrication", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1995, University of Texas, Austin, August 1995, pp. 326-33.
19. Kirschman, C.F., Jara-Almonte, C.C., Bagchi, A., Dooley, R.L. and Ogale, A.A., "Computer aided design of support structures for stereolithographic components", Proceedings of the 1991 ASME Computers in Engineering Conference, Santa Clara, CA, August 1991, pp. 443-8.
20. Webb, D., Verdes, V. and Cassapis, C., "Computer-aided support-structure design for stereolithography models", in Chartoff, R.P., Lightman, A.J. and Schenk, J.A. (Eds), Proceedings of the 5th International Conference on Rapid Prototyping, University of Dayton, June 1994, pp. 221-8.
21. Swaelens, B., Pauwels, J. and Vancraen, W., "Support generation for rapid prototyping", in Chartoff, R.P. and Lightman, A.J. (Eds), Proceedings of the 6th International Conference on Rapid Prototyping, University of Dayton, June 1995, pp. 115-21.
22. Allen, S. and Dutta, D., "Determination and evaluation of support structures in layered manufacturing", Journal of Design and Manufacturing, Vol. 5, 1995, pp. 153-62.
23. Chalasani, K., Jones, L. and Roscoe, L., "Support generation for fused deposition modeling", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1995, University of Texas, Austin, August 1995, pp. 229-41.
24. Otto, H.E., Kimura, F., Mandorli, F. and Cugini, U., "Extension of feature-based CAD systems using TAE structures to support integrated rapid prototyping", Proceedings of the Computers in Engineering Conference and the Engineering Database Symposium, ASME, 1995, pp. 779-93.
25. Allen, S. and Dutta, D., "Wall thickness control in layered manufacturing", Proceedings of the 13th Annual ACM Symposium on Computational Geometry, Nice, France, 1997.
26. Rock, S.J. and Wozny, M.J., "Utilizing topological information to increase scan vector generation efficiency", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1991, University of Texas, Austin, August 1991, pp. 28-36.
27. Chalasani, K.L., Grogan, B.N., Bagchi, A., Jara-Almonte, C.C., Ogale, A.A. and Dooley, R.L., "An algorithm to slice 3D shapes for reconstruction in prototyping systems", Proceedings of the 1991 ASME Computers in Engineering Conference, August 1991, pp. 209-16.
28. Kirschman, C.F. and Jara-Almonte, C.C., "A parallel slicing algorithm for solid freeform fabrication processes", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1992, University of Texas, Austin, August 1992, pp. 26-33.
29. Farouki, R.T. and Konig, T., "Computational methods for rapid prototyping of analytic solid models", Rapid Prototyping Journal, Vol. 2 No. 3, 1996, pp. 41-9.
30. Guduri, S., Crawford, R.H. and Beaman, J.J., "A method to generate exact contour files for solid freeform fabrication", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1992, University of Texas, Austin, August 1992, pp. 95-101.
31. Guduri, S., Crawford, R.H. and Beaman, J.J., "Direct generation of contour files from constructive solid geometry representations", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1993, University of Texas, Austin, August 1993, pp. 291-302.
32. Rajagopalan, M., Aziz, N.M. and Huey, C.O. Jr, "A model for interfacing geometric modeling data with rapid prototyping systems", Advances in Engineering Software, Vol. 23, 1995, pp. 89-96.
33. Vuyyuru, P., Kirschman, C.F., Fadel, G., Bagchi, A. and Jara-Almonte, C.C., "A NURBS-based approach for rapid product realization", in Chartoff, R.P. et al. (Eds), Proceedings of the 5th International Conference on Rapid Prototyping, The University of Dayton, June 1994, pp. 229-39.
34. Dolenc, A. and Mäkelä, I., "Slicing procedures for layered manufacturing techniques", Computer-Aided Design, Vol. 26 No. 2, February 1994, pp. 119-26.
35. Tata, K. and Fadel, G., "Feature extraction from tessellated and sliced data in layered manufacturing", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1996. University of Texas, Austin, August 1996, pp. 587-95.
36. Sabourin, E., Houser, S.A. and Bøhn, J.H., "Adaptive slicing using stepwise uniform refinement", Rapid Prototyping Journal, Vol. 2 No. 4, 1996, pp. 20-26.
37. Jamieson, R. and Hacker, H., "Direct slicing of CAD models for rapid prototyping", Rapid Prototyping Journal, Vol. 1 No. 2, 1995, pp. 4-12.
38. Suh, Y.S. and Wozny, M.J., "Adaptive slicing for solid freeform fabrication processes", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1993, University of Texas, Austin, August 1993, pp. 404-10.
39. Kulkarni, P. and Dutta, D., "Adaptive slicing of parametrizable algebraic surfaces for layered manufacturing", in Azram, S. et al. (Eds), Proceedings of the ASME Design Engineering Technical Conferences, Vol. 1, 1995, pp. 211-17.
40. Kulkarni, P. and Dutta, D., "An accurate slicing procedure for layered manufacturing", Computer-Aided Design, Vol. 28 No. 9, 1996, pp. 683-97.
41. Rajan, D.S. and Luo, R.C., "CAD model slicing and surface smoothing for building rapid prototyping parts", IECON Proceedings (Industrial Electronics Conference), 96CH35830, 1996, pp. 1496-501.
42. Luo, R.C. and Ma, Y., "A slicing algorithm for rapid prototyping and manufacturing", Proceedings of IEEE International Conference on Robotics and Automation, 95CH3461-1, 1995, pp. 2841-6.
43. Novac, A.S., Lee, C.H. and Thomas, C.L., "Automated technique for adaptive slicing in layered manufacturing", Proceedings of the 7th International Conference on Rapid Prototyping, San Francisco, March-April 1997, pp. 85-93.
44. Chen, C.C. and Sullivan, P.A., "Predicting total buildtime and the resultant cure depth of the 3D stereolithography process", Rapid Prototyping Journal, Vol. 2 No. 4, 1996, pp. 27-40.
45. Crawford, R.H., "Computer aspects of solid freeform fabrication: geometry, process control, and design", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1993, University of Texas, Austin, August 1993, pp. 102-12.
46. Chang, W.-R., CAD/CAM for the Selective Laser Sintering Process, MS Thesis, University of Texas, Austin, TX, 1989.
47. Chari, J.K. and Hall, J.L., "Robust prototyping", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1993, University of Texas, Austin, August 1993, pp. 135-42.
48. Yang, D.C.H., Jou, Y., Kong, T. and Chuang, J.-J., "Laser beam diameter compensation for Helisys LOM machine", in Chartoff, R.P. and Lightman, A.J. (Eds), Proceedings of the 6th International Conference on Rapid Prototyping, University of Dayton, June 1995, pp. 171-8.
49. Chen, K., Crawford, R.H. and Beaman, J.J., "Parametric representation of part contours in SLS process", in Bourell, D.L. et al. (Eds), Solid Freeform Fabrication Symposium 1996, University of Texas, Austin, August 1996, pp. 597-608.
50. Farouki, R.T., Tarabanis, K., Korein, J.U., Batchelder, J.S. and Abrams, S.R., "Offset curves in layered manufacturing", Proceedings of the 1994 International Mechanical Engineering Congress and Exposition, PED, Vol. 68 No. 2, 1994, pp. 557-67.
51. Ganesan, M. and Fadel, G., "Hollowing rapid prototyping parts using offsetting techniques", in Chartoff, R.P. et al. (Eds), Proceedings of the 5th International Conference on Rapid Prototyping, University of Dayton, June 1994, pp. 241-51.
52. Coquillart, S., "Computing offsets of B-spline curves", Computer-Aided Design, Vol. 19 No. 6, July/August 1987, pp. 305-09.
53. Tiller, W. and Hanson, E.G., "Offsets of two-dimensional profiles", IEEE Computer Graphics and Applications, September 1984, pp. 36-46.
54. Brown, S., "Simulation of solid freeform fabrication", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1993, University of Texas, Austin, August 1993, pp. 143-9.
55. Bugeda, G., Cervera, M., Guillermo, L. and Oñate, E., "Numerical analysis of stereolithography processes using the finite element method", Rapid Prototyping Journal, Vol. 1 No. 2, 1995, pp. 13-23.
56. Ullett, J.S., Chartoff, R.P., Lightman, A.J., Murphy, J.P. and Li, J., "Reducing warpage in stereolithography through novel draw styles", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1994, University of Texas, Austin, August 1994. pp. 242-9.
57. Jayanthi, S., Keefe, M. and Gargiulo, E.P., "Studies in stereolithography: influence of process parameters on curl distortion in photopolymer models", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1994, University of Texas, Austin, August 1994, pp. 250-58.
58. Badrinarayan, B. and Barlow, J.W., "Effect of processing parameters in SLS of metal-polymer powders", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1995, University of Texas, Austin, August 1995, pp. 55-63.
59. Agarwala, M.K., Bourell, D.L., Wu, B. and Beaman, J.J., "An evaluation of the mechanical behavior of bronze-Ni composites produced by selective laser sintering", in Marcus, H.L. et al. (Eds), Solid Freeform Fabrication Symposium 1993, University of Texas, Austin, August 1993, pp. 193-203.
60. Fodran, E., Koch, M. and Menon, U., "Mechanical and dimensional characteristics of fused deposition modeling build styles", in Bourell, D.L. et al. (Eds), Solid Freeform Fabrication Symposium 1996, University of Texas, Austin, August 1996, pp. 419-42.
61. Kulkarni, P. and Dutta, D., "Deposition strategies and resulting part stiffness in layered manufacturing", ASME Journal of Manufacturing Science and Engineering, in review, December 1996.
62. Feldman, L.A., "Mechanical testing of laser-cured photopolymers for multiple-layer structures", Journal of Materials Science Letters, Vol. 11, 1992, pp. 1231-3.
63. Chambers, R.S., Guess, T.R. and Hinnerichs, T.D., "A phenomenological finite element model of part building in the stereolithography process", Proceedings of the 5th International Conference on Rapid Prototyping, Dayon, June 1994, pp. 81-90.
64. Yardimci, A.M., Guceri, S.I. and Danforth, S.C., "A phenomenological numerical model for fused deposition processing of particle filled parts", Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas, August 1995, pp. 189-95.
65. Yardimci, A.M., Guceri, S.I., Danforth, S.C. and Agarwala, M., "Part quality prediction tools for fused deposition processing", Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas, August 1996, pp. 539-48.
66. Yardimci, A.M. and Guceri, S.I., "Conceptual framework for the thermal process modeling of fused deposition", Rapid Prototyping Journal, Vol. 2 No. 2, 1996.
67. Krishnan, R., Yamaguchi, Y. and Prinz, F., "Spatial partitioning of solids for solid freeform fabrication", Proceedings of the 4th Symposium on Solid Modeling and Applications, Association for Computing Machinery, Atlanta, May 1997, pp. 346-53.
68. Rodriguez, J., Thomas, J.P. and Renaud, J.E., "Modeling the mechanical properties of fused deposition polymer components", Proceedings of the ASME Winter Annual Meeting, Dallas, November 1997.
69. Bleuth, J.L. and Narayan, S.H., "Residual stress driven delamination in deposited multi-layers", International Journal of Solids and Structures, Vol. 33 No. 1, 1996, pp. 65-78.
70. Van Weeren, R., Agarwala, M., Jamalabad, V.R., Bandopadhyay, A., Vaidyanathan, R., Langrana, N., Safari, A., Whalen, P., Danforth, S.C. and Ballard, C., "Quality of parts processed by fused deposition", Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas, August 1995, pp. 314-21.
71. Hope, R.L. Jacobs, P.A. and Roth, R.N., "Rapid prototyping with sloping surfaces", Rapid Prototyping Journal, Vol. 3 No. 1, 1997, pp. 12-19.
72. de Jager, P.J., "Using slanted and ruled layers for rapid prototyping", Proceedings of the 5th European Conference on Rapid Prototyping and Manufacturing, Helsinki, June 1996, pp. 15-29.
73. Cheah, C.M., Nee, A.Y.C., Fuh, J.Y.H., Lu, L., Choo, Y.S. and Miyazawa, T., "Characteristics of photopolymeric material used in rapid prototypes Part I. Mechanical properties in the green state", Journal of Materials Processing Technology, Vol. 67, 1997, pp. 41-45.
74. Khoshnevis, B., "Quantum leap in rapid prototyping unveiled", US-Tech, June-July 1997.
75. Kulkarni, P. and Dutta, D., "On the integration of layered manufacturing and material removal processes", submitted to the ASME Journal of Manufacturing Science and Engineering, 1998.
76. Qian, X. and Dutta, D., "An architecture for interoperability of layered manufacturing data", to be presented at the ASME Design Automation Conference, Atlanta, GA, September 14-17, 1998.
77. Kumar, V. and Dutta, D., "An approach to modeling and representation of heterogeneous objects", accepted for publication in ASME Journal of Mechanical Design, 1998.
78. Chandru, V., Manohar, S. and Prakash, C.E., "Voxel-based modeling for layered manufacturing", IEEE Computer Graphics and Applications, Vol. 15 No. 6, November 1995, pp. 42-7.
79. Jackson, T., Patrikalakis, N. and Sachs, E., "Modeling and designing components with locally controlled composition", Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas, Austin, August 10-12, 1998.
80. Ghosh, A., Miyamoto, Y., Reimanis, I. and Launutti J. (Eds), Ceramic Transactions: Functionally Gradient Materials, Vol. 76, 1997.
81. Fessler, J., Nickel, A., Link, G., Prinz, F. and Fussell, P., "Functional gradient metallic prototypes through shape deposition manufacturing", Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas, August 1997, pp. 521-8.
82. Bendsoe, M.P. and Kikuchi, N., "Generating optimal topologies in structural design using a homogenization method", Computer Methods in Applied Mechanics and Engineering, Vol. 71, pp. 197-224.
83. Binnard, M. and Cutkosky, M.R., "Building block design for layered shape manufacturing", DETC98/DFM-5725, Proceedings of the 1998 ASME DETC/DFM Conference, Atlanta, GA, 1998.
84. Pinilla, J.M., Kao, J.-H. and Prinz, F., "Process planning and automation for additive-subtractive solid freeform fabrication", Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas, Austin, August 10-12, 1998.