Survey of process planning techniques for layered manufacturing

Proceedings of the ASME Design Engineering Technical Conference

Volumn 2, Issue , 1997, Pages

  Marsan, Anne ^a   Dutta, Debasish ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER AIDED DESIGN; SURVEYS;

ENGINEERING DATA; PART ORIENTATION; PLANNING TECHNIQUES; PROCESS PLANNING SYSTEMS; SOLID MODEL; STL FILE; TOOLPATHS;

PROCESS PLANNING;

EID: 85031476594     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC97/DAC-3988     Document Type: Conference Paper

References (75)

1. McMains, Sara Anne. Rapid Prototyping of Solid Three-Dimensional Parts, Master's Project, University of California, Berkeley, CA, 1995.
2. Kochan, D. Solid Freeform Manufacturing. Elsevier, Amsterdam, 1993, p. 123.
3. Kumar, Vinod and Dutta, Debasish. "An Assessment of Data Formats for Layered Manufacturing", Advances in Engineering Software, in press, 1997.
4. Roscoe, L. E., Chalasani, K. L., and Meyer, T. D. "Living With STL Files, " Proceedings of the Sixth International Conference on Rapid Prototyping, R. P. Chartoff and A. J. Lightman, eds. University of Dayton, June 1995, pp. 145-151.
5. Carleberg, Per. "Product Model Driven Direct Manufacturing, " Solid Freeform Fabrication Symposium 1994, H. L. Marcus et al., eds. University of Texas, Austin, August 1994, pp. 270-276.
6. Owen, Jon. STEP: An Introduction, Information Geometers, Winchester, U. K., 1993.
7. Gilman, Charles R. and Rock, Stephen J. "The Use of STEP to Integrate Design and Solid Freeform Fabrication, " Solid Freeform Fabrication Symposium 1995, University of Texas, Austin, August 1995.
8. Kumar, Vinod and Dutta, Debasish. "An Approach to Modeling Multi-Material Objects, " Proceedings of the1997 ACM Solid Modeling Conference, Atlanta, GA, May 1997.
9. Miller, John F. "CAD Requirements for Rapid Prototyping Tutorial", Rapid Prototyping and Manufacturing '94, Society of Manufacturing Engineers, Detroit, MI, 1994.
10. 10. Sheng, Xuejun and Meier, Ingo R. "Generating Topological Structure for Surface Models, " IEEE Computer Graphicsand Applications, vol. 15, no. 6, November 1995, pp. 35-41.
11. Bøhn, Jan H. and Wozny, M. J. "Automatic CAD-model Repair: Shell-Closure, " Solid Freeform Fabrication Symposium 1992, H. L. Marcus et al., eds. University of Texas, Austin, August 1992, pp. 86-94.
12. Bøhn, Jan H. Automatic CAD-Model Repair, Ph. D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, August 1993.
13. Bøhn, Jan Helge and Wozny, Michael J. "A Topology-Based Approach for Shell-Closure, " Geometric Modeling for Product Realization, P. R. Wilson et al., eds., Elsevier, Amsterdam, 1993, pp. 297-319.
14. Bøhn, Jan H. "Removing Zero-Volume Parts from CAD Models for Layered Manufacturing, " IEEE Computer Graphics and Applications, vol. 15, no. 6, November 1995, pp. 27-34.
15. Mäkelä, I. and Dolenc, A. "Some Efficient Procedures for Correcting Triangulated Models, " Solid Freeform Fabrication Symposium 1993, H. L. Marcus et al., eds. University of Texas, Austin, August 1993, pp. 126-134.
16. Fadel, Georges M. and Kirschman, Chuck. "Accuracy Issues in CAD to RP Translations, " Rapid Prototyping Journal. vol 2, no. 2, 1996, pp. 4-17.
17. Morvan, Stephane M. and Fadel, Georges M. "IVECS, Interactively Correcting STL Files in a Virtual Environment, " Solid Freeform Fabrication Symposium 1996, D. L. Bourell et al., eds. University of Texas, Austin, August 1996, pp. 491-498.
18. Kirschman, C. F., Bagchi, A., Jara-Almonte, C. C., Dooley, R. L., and Ogale, A. A. "The Clemson Intelligent Design Editor for Stereolithography, " Proceedings of the Second International Conference on Rapid Prototyping, University of Dayton, June 1991, pp. 240-245.
19. Bailey, Michael J. "Tele-Manufacturing: Rapid Prototyping on the Internet, " IEEE Computer Graphics and Applications, vol. 15, no. 6, November 1995, pp. 20-26.
20. Rock, Stephen J. and Wozny, Michael J. "Generating Topological Information from a 'Bucket of Facets', " Solid Freeform Fabrication Symposium 1992, H. L. Marcus et al., eds. University of Texas, Austin, 1992, pp. 251-259.
21. Sreeram, Puduhai N. and Dutta, Debasish. "Determination of Optimal Orientation Based on Variable Slicing Thickness in Layered Manufacturing, " Proceedings of the 1995 ASME Winter Annual Conference, San Francisco, CA, Nov. 1995.
22. Bablani, Minoo, and Bagchi, Amit. "Quantification of Errors in Rapid Prototyping Processes, and Determination of Preferred Orientation of Parts, " Transactions of the North American Manufacturing Research Institution of the SME, vol. XXIII, SME, Houghton, MI, May 1995, pp. 319-324.
23. Cheng, W., Fuh, J. Y. H, Nee, A. Y. C., Wong, Y. S., Logh, H. T., and Miyazawa, T. "Multi-objective optimization of part building orientation in stereolithography, " Rapid Prototyping Journal, vol. 1, no. 4, 1995, pp. 12-23.
24. Allen, Seth and Dutta, Deba. "On the Computation of Part Orientation Using Support Structures in Layered Manufacturing, " Solid Freeform Fabrication Symposium 1994, H. L. Marcus et al., eds., University of Texas, Austin, 1994, pp. 259-269.
25. Frank, Dietmar and Fadel, Georges. "Preferred Direction of Build for Rapid Prototyping Processes, " Proceedings of the Fifth International Conference on Rapid Prototyping, R. P. Chartoff, A. J. Lightman, and J. A. Schenk, eds. University of Dayton, June 1994, pp. 191-200.
26. Frank, Dietmer and Fadel, Georges. "Expert system-based selection of the preferred direction of build for rapid prototyping processes, " Journal of Intelligent Manufacturing, vol. 6, no. 5, October 1995, pp. 339-345.
27. Thompson, David C. and Crawford, Richard H. "Optimizing Part Quality with Orientation, " Solid Freeform Fabrication Symposium 1995, H. L. Marcus et al., eds. University of Texas, Austin, August 1995.
28. Suh, Yong S. and Wozny, Michael J. "Integration of a Solid Freeform Fabrication Process into a Feature-Based CAD System Environment, " Solid Freeform Fabrication Symposium 1995, H. L. Marcus et al., eds. University of Texas, Austin, August 1995.
29. Wodziak, John R., Fadel, Georges M., and Kirschman, Chuck. "A Genetic Algorithm for Optimizing Multiple Part Placement to Reduce Build Time, " Proceedings of the Fifth International Conference on Rapid Prototyping, R. P. Chartoff, A. J. Lightman, J. A. Schenk, eds. University of Dayton, June 1994, pp. 201-210.
30. Beascoechea, Alejandro and Wozny, Michael J. "On Three Dimensional Heuristic Packing for Solid Freeform Fabrication, " Solid Freeform Fabrication Symposium 1995, H. L. Marcus et al., eds., University of Texas, Austin, August 1995, pp. 326-333.
31. Jacobs, Paul F. Rapid Prototyping and Manufacturing. McGraw Hill, New York, 1992.
32. Kirschman, C. F., Jara-Almonte, C. C., Bagchi, A., Dooley, R. L., and Ogale, A. A. "Computer Aided Design of Support Structures for Stereolithographic Components, " Proceedings of the 1991 ASME Computers in Engineering Conference, Santa Clara, CA, August 1991, pp. 443-448.
33. Webb, Douglas, Verdes, Victor, and Cassapis, Constantin. "Computer-aided Support-Structure Design for Stereolithography Models, " Proceedings of the Fifth International Conference on Rapid Prototyping, R. P. Chartoff, A. J. Lightman and J. A. Schenk, eds. University of Dayton, June 1994, pp. 221-228.
34. Swaelens, Bart, Pauwels, Johan, and Vancraen, Wilfried. "Support Generation for Rapid Prototyping, " Proceedings of the Sixth International Conference on Rapid Prototyping, R. P. Chartoff and A. J. Lightman, eds. University of Dayton, June 1995, pp. 115-121.
35. Allen, Seth and Dutta, Deba. "Determination and evaluation of support structures in layered manufacturing, " Journal ofDesign and Manufacturing, vol. 5, 1995, pp. 153-162.
36. Chalasani, Kumar, Jones, Larry, and Roscoe, Larry. "Support Generation for Fused Deposition Modeling, " Solid Freeform Fabrication Symposium 1995, H. L. Marcus et al., eds, University of Texas, Austin, August 1995, pp. 229-241.
37. Otto, Harald E., Kimura, Fumihiko, Mandorli, Ferruccio, and Cugini, Umberto. "Extension of Feature-Based CAD Systems Using TAE Structures to Support Integrated Rapid Prototyping, " Proceedings of the Computers in Engineering Conference and the Engineering Database Symposium, ASME, 1995, pp. 779-793.
38. Allen, Seth and Dutta, Deba. "Wall Thickness Control in Layered Manufacturing, " Proceedings of the 13th Annual ACM Symposium on Computational Geometry, Nice, France, 1997.
39. Rock, Stephen J. and Wozny, Michael J. "Utilizing Topological Information to Increase Scan Vector Generation Efficiency, " Solid Freeform Fabrication Symposium 1991, H. L. Marcus et al., eds. University of Texas, Austin, August 1991, pp. 28-36.
40. Chalasani, K. L., Grogan, B. N., Bagchi, A., Jara-Almonte, C. C., Ogale, A. A., and Dooley, R. L. "An Algorithm to Slice 3D Shapes for Reconstruction in Prototyping Systems, " Proceedings of the 1991 ASME Computers in Engineering Conference, August 1991, pp. 209-216.
41. Kirschman, C. F. and Jara-Almonte, C. C. "A Parallel Slicing Algorithm for Solid Freeform Fabrication Processes, " Solid Freeform Fabrication Symposium 1992, H. L. Marcus, et al., eds. University of Texas, Austin, August 1992, pp. 26-33.
42. Farouki, Rida T. and Konig, Thomas. "Computational methods for rapid prototyping of analytic solid models, " Rapid Prototyping Journal, vol. 2., no. 3, 1996, pp. 41-49.
43. Guduri, Sashidhar, Crawford, Richard H., and Beaman, Joseph J. "A Method to Generate Exact Contour Files for Solid Freeform Fabrication, " Solid Freeform Fabrication Symposium 1992, H. L. Marcus et al., eds. University of Texas, Austin, August 1992, pp. 95-101.
44. Guduri, Sashidhar, Crawford, Richard H., and Beaman, Joseph J. "Direct Generation of Contour Files from Constructive Solid Geometry Representations, " Solid Freeform Fabrication Symposium 1993, H. L. Marcus et al., eds. University of Texas, Austin, August 1992, pp. 291-302.
45. Rajagopalan, Mukund, Aziz, Nadim M., and Huey, Cecil O. Jr. "A model for interfacing geometric modeling data with rapid prototyping systems, " Advances in Engineering Software, vol. 23, 1995, pp. 89-96.
46. Vuyyuru, P., Kirschman, C. F., Fadel, G. Bagchi, A., Jara-Almonte, C. C. "A NURBS-Based Approach For Rapid Product Realization, " Proceedings of the Fifth International Conference on Rapid Prototyping, R. P. Chartoff et al, eds. The University of Dayton, June 1994, pp. 229-239.
47. Dolenc, A. and Mäkelä, I. "Slicing procedures for layered manufacturing techniques, " Computer-Aided Design, vol. 26, no. 2, February, 1994, pp. 119-126.
48. Tata, Kamesh and Fadel, Georges. "Feature Extraction from Tessellated and Sliced Data in Layered Manufacturing, " Solid Freeform Fabrication Symposium 1996, H. L. Marcus et al., eds. University of Texas, Austin, August 1996, pp. 587-595.
49. Sabourin, Emmanuel, Houser, Scott A., and Bøhn, Jan Helge. "Adaptive slicing using stepwise uniform refinement, " Rapid Prototyping Journal, vol. 2, no. 4, 1996, pp. 20-26.
50. Jamieson, Ron and Hacker, Herbert. "Direct Slicing of CAD Models for Rapid Prototyping, " Rapid Prototyping Journal, vol. 1, no. 2, 1995, pp. 4-12.
51. Suh, Yong Seok and Wozny, Michael J. "Adaptive Slicing for Solid Freeform Fabrication Processes, " Solid Freeform Fabrication Symposium 1993, H. L. Marcus et al., eds. University of Texas, Austin, August 1993, pp. 404-410.
52. Kulkarni, Prashant and Dutta, Debasish. "Adaptive Slicing of Parametrizable Algebraic Surfaces for Layered Manufacturing, " Proceedings of the ASME Design Engineering Technical Conferences, vol. 1, S. Azram et al., eds. 1995, pp. 211-217.
53. Kulkarni, Prashant and Dutta, Debasish. "An Accurate Slicing Procedure of Layered Manufacturing, " Computer-Aided Design, vol. 28, no. 9, 1996, pp. 683-697.
54. Chen, Calvin C. and Sullivan, Paul. A. "Predicting total buildtime and the resultant cure depth of the 3D stereolithography process, " Rapid Prototyping Journal, vol. 2, no. 4, 1996, pp. 27-40.
55. Crawford, Richard H. "Computer Aspects of Solid Freeform Fabrication: Geometry, Process Control, and Design, " Solid Freeform Fabrication Symposium 1993, H. L. Marcus et al., eds. University of Texas, Austin, August 1993, pp. 102-112.
56. Chang, Wei-Ren. CAD/CAM for the Selective Laser Sintering Process, M. S. Thesis, University of Texas, Austin, TX, 1989.
57. Chari, Jana K. and Hall, Jerry L. "Robust Prototyping, " Solid Freeform Fabrication Symposium 1993, H. L. Marcus et al., eds. University of Texas, Austin, August 1993, pp. 135-142.
58. Yang, Daniel C. H., Jou, Yungsen, Kong, Tom, and Chuang, Jui-Jen. "Laser Beam Diameter Compensation for Helisys LOM Machine, " Proceedings of the Sixth International Conference on Rapid Prototyping, R. P. Chartoff and A. J. Lightman, eds. University of Dayton, June 1995, pp. 171-178.
59. Chen, Knewei, Crawford, Richard H., and Beaman, Joseph J. "Parametric Representation of Part Contours in SLS Process, " Solid Freeform Fabrication Symposium 1996, D. L. Bourell et al., eds. University of Texas, Austin, August 1996, pp. 597-608.
60. Farouki, R. T., Tarabanis, K., Korein, J. U., Batchelder, J. S., and Abrams, S. R. "Offset Curves in Layered Manufacturing, " Proceedings of the 1994 International MechanicalEngineering Congress and Exposition, PED vol. 68-2, 1994, pp. 557-567.
61. Ganesan, Mahendrakumar and Fadel, Georges. "Hollowing Rapid Prototyping Parts Using Offsetting Techniques, " Proceedings of the Fifth International Conference on Rapid Prototyping, R. P. Chartoff et al., eds. University of Dayton, June 1994, pp. 241-251.
62. Coquillart, S. "Computing offsets of B-spline curves, " Computer-Aided Design, vol. 19, no. 6, July/August 1987, pp. 305-309.
63. Tiller, W., and Hanson, E. G. "Offsets of two dimensional profiles, " IEEE Computer Graphics and Applications, Sept. 1984, pp. 36-46.
64. Brown, Stuart. "Simulation of Solid Freeform Fabrication, " Solid Freeform Fabrication Symposium 1993, H. L. Marcus et al., eds. University of Texas, Austin, August 1993, pp. 143-149.
65. Bugeda, Gabriel, Cervera, Miguel, Guillermo, Lombera, and Oñate, Eugenio. "Numerical analysis of stereolithography processes using the finite element method, " Rapid Prototyping Journal, vol. 1, no. 2, 1995, pp. 13-23.
66. Ullett, Jill S., Chartoff, R. P., Lightman, A. J., Murphy, J. P., and Li, Jinghong. "Reducing Warpage in Stereolithography Through Novel Draw Styles, " Solid Freeform Fabrication Symposium 1994, H. L. Marcus et al., eds. University of Texas, Austin, August 1994. pp. 242-249.
67. Jayanthi, Suresh, Keefe, Michael, and Gargiulo, Edward P. "Studies in Stereolithography: Influence of Process Parameters on Curl Distortion in Photopolymer Models, " Solid Freeform Fabrication Symposium 1994, H. L. Marcus et al., eds. University of Texas, Austin, August 1994. pp. 250-258.
68. Badrinarayan, B. and Barlow, J. W. "Effect of Processing Parameters in SLS of Metal-Polymer Powders, " Solid Freeform Fabrication Symposium 1995, H. L. Marcus et al., eds., University of Texas, Austin, August 1995, pp. 55-63.
69. Agarwala, Mukesh K., Bourell, David L., Wu, Benny, and Beaman, Joseph J. "An Evaluation of the Mechanical Behavior of Bronze-Ni Composites Produced by Selective Laser Sintering, " Solid Freeform Fabrication Symposium 1993, H. L. Marcus et al., eds. University of Texas, Austin, August 1993, pp. 193-203.
70. Fodran, Eric, Koch, Martin, and Menon, Unny. "Mechanical and Dimensional Characteristics of Fused Deposition Modeling Build Styles, " Solid Freeform Fabrication Symposium 1996, D. L. Bourell et al., eds. University of Texas, Austin, August 1996, pp. 419-442.
71. Kulkarni, Prashant and Dutta, Debasish. "Deposition Strategies and Resulting Part Stiffness in Layered Manufacturing, " ASME Journal of Manufacturing Science and Engineering, in review, December 1996.
72. Marsan, A. L. and Dutta, D. "Construction of a Surface Model and Layered Manufacturing Data From 3D Homogenization Output, " Journal of Mechanical Design, vol. 118, Sept. 1996, pp. 412-418.
73. Vail, N. K., Wilke, W., Bieder, H., and Nemann, G. J. "Interfacing Reverse Engineering Data to Rapid Prototyping, " Solid Freeform Fabrication Symposium 1996, D. L. Bourell et al., eds. University of Texas, Austin, August 1996.
74. Hoppe, Hugues, DeRose, Tony, Duchamp, Tom, McDonald, John, and Stuetzle, Werner. "Surface Reconstruction from Unorganized Points, " Computer Graphics Proceedings, Annual Conference Series, August 1992, pages 295-302.
75. Meyers, David. "Multiresolution Tiling, " Computer Graphics Forum, December 1994.