Influence of fog parameters on the aging of HTV silicone rubber

IEEE Transactions on Dielectrics and Electrical Insulation

Volumn 6, Issue 6, 1999, Pages 835-844

  Zhang, H ^a   Hackam, R ^a,b  

^a UNIVERSITY OF WINDSOR   (Canada)

^b KUMAMOTO UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

AGING OF MATERIALS; DROP FORMATION; HYDROPHOBICITY; LEAKAGE CURRENTS; NOZZLES; RUBBER; SILICONES; SURFACE ROUGHNESS;

HIGH TEMPERATURE VULCANIZED (HTV) SILICONE RUBBER;

ELECTRIC INSULATING MATERIALS;

EID: 0033352291     PISSN: 10709878     EISSN: None     Source Type: Journal    
DOI: 10.1109/94.822025     Document Type: Article

References (49)

1. IEEE Insulated Conductors Committee WG 12-39 Paper, "Proposed Extended Time Artificial Pollution Tests For Polymeric Cable Accessories", IEEE Trans. PAS, Vol. 104, pp. 1243-1253, 1985.
2. IEC Publication 507, "Artificial Pollution Tests On HV Insulators To Be Used On ac Systems", pp. 1-37, 1975.
3. ANSI C29. 11-1989, "American National Standard for Composite Suspension Insulators for Overhead Transmission Lines-Tests", pp. 1-12, 1989.
4. IEC 1109, "Composite Insulators For ac Overhead Lines With a Nominal Voltage Greater Than 1000 V - Definitions, Test Methods And Acceptance Criteria", 1992.
5. "P4 Draft Standard Technique For HV Testing", IEEE Power Engineering Society, Power Systems Instrumentation and Measurements Committee Draft Report, 1994.
6. IEEE Std. 1133-1988, "IEEE Application Guide For Evaluating Non-ceramic Materials For HV Outdoor Applications", 1988.
7. W. T. Starr, "Polymeric Outdoor Insulation", IEEE Trans. EI, Vol. 25, pp. 125-136, 1990.
8. T. Sorquist and A. E. Vlastos, "Outdoor Polymeric Insulators Long Term Exposed to HVDC", IEEE Trans. PD, Vol. 12, pp. 1041-1048, 1997.
9. T. Sorquist and A. E. Vlastos, "Performance And Aging of Polymeric Insulators", IEEE Trans. PD, Vol. 12, pp. 1657-1665, 1997.
10. R. G. Houlgate and D. A. Swift, "Composite Rod Insulators For ac Power Lines: Electrical Performance Of Various Designs At a Coastal Testing Station", IEEE Trans. PD., Vol. 5, pp. 1944-1955, 1990.
11. S. Gubanski and R. Hartings, "Swedish Research on The Application of Composite Insulators in Outdoor Insulation", IEEE Electrical Insulation Magazine, Vol. 11, No. 5, pp. 24-31, 1995.
12. T. Zhao and R. A. Bernstorf, "Aging Tests Of Polymeric Housing Materials for Nonceramic Insulators", IEEE Electrical Insulation Magazine, Vol. 14, No. 2, pp. 26-33, 1998.
13. J. Mackevich and M. Shah, "Polymer Outdoor Insulation Materials Part I: Comparison of Porcelain and Polymer Electrical Insulation", IEEE Electrical Insulation Magazine, Vol. 13, No. 3, pp. 5-11, 1997
14. J. Mackevich and S. Simmons, "Polymer Outdoor Insulating Materials Part II: Materials Considerations", IEEE Electrical Insulation Magazine, Vol. 13, No. 4, pp. 10-16, 1997.
15. S. Simmons, M. Shah, J. Mackevich and R. J. Chang", Polymer Outdoor Insulating Materials Part III: Silicone Elastomer Considerations", IEEE Electrical Insulation Magazine, Vol. 13, No. 5, pp. 25-32, 1997.
16. IEEE Dielectrics and Insulation Society's Outdoor Environment Committee S-32- 3 Electrical, "Protective Coatings For Improving Contamination Performance of Outdoor HV Ceramic Insulators", IEEE Trans. PD, Vol. 10, pp. 924-931, 1995.
17. J. F. Hall, "History and Bibliography of Polymeric Insulators for Outdoor Applications", IEEE Trans PD, Vol. 8, pp. 376-385, 1993.
18. IEEE Dielectrics and Electrical Insulation Society's Outdoor Service Committee S-32-3, "Round Robin Testing of RTV Silicone Rubber Coatings for Outdoor Insulators", IEEE Trans. PD, Vol. 11, pp. 1881-1887, 1996.
19. G. Karady, "The Effect of Fog Parameters on the Testing of Artificially Contaminated Insulators In a Fog Chamber", IEEE Trans. PAS, Vol. 94, pp. 378-387, 1975.
20. [201 K. Naito, T. Kawaguchi, M. Ito and H. Katsukawa, "Influence of Fog Parameters on Withstand Voltage of Contaminated Insulators", IEEE Trans. PAS, Vol. 102, pp. 729-737, 1983.
21. Y. MaeKawa, Y. Mizuno, K. Naito, H. Koshino, H. Shinokubo and M. Ishiwari, "Electrical Insulating Characteristics of Polymeric Materials Under Wetting and Contaminated Conditions - Results of CIGRE Round Robin Test", Proc. IEEE - Int. Symps. Electr. Insulating Materials, pp. 615-618, 1998.
22. S. H. Kim and R. Hackam, "Effects of Saline Water Flow Rate And Air Speed on Leakage Current in RW Coatings", IEEE Trans. on PD, Vol. 10, pp. 1956-1964, 1995.
23. R. S. Gorür, E. A. Cherney and R. Hackam, "A Comparative Study of Polymer Insulating Materials Under Salt-Fog Conditions", IEEE Trans, on Electrical Insulation, Vol. 21, No. 2, pp. 175-182, 1986.
24. S. H. Kim, E. A. Cherney and R. Hackam, "Suppression Mechanism of Leakage Current on RTV Coated Porcelain and Silicone Rubber Insulators", IEEE Trans. on Power Delivery, Vol. 6, No. 4, pp. 1549-1556, 1991.
25. "IEEE Standard Techniques for HV Testing", IEEE Std. 4-1978, pp. 31.
26. H. Deng, R. Hackam and E. A. Cherney, "Role of the Size of Particles of Alumina Trihydrate Filler on the Life of RTV Silicone Rubber Coating", IEEE Trans. on PD, Vol. 10, pp. 1012-1024, 1995.
27. R. S. Gorur, E. A. Cherney, R. Hackam and T. Orbeck, "The Electrical Performance of Polymeric Insulating Materials Under Accelerated Aging in Fog Chamber", IEEE Trans. PD, Vol. 3, pp. 1157-1164, 1988.
28. S. H. Kim, E. A. Cherney, R. Hackam and K. G. Rutherford, "Chemical Changes at the Surface of RTV Silicone Rubber Coatings on Insulators During Dry-Band Arcing", IEEE Trans. on DEI, pp. 106-123, Vol. 1, 1994.
29. J. A. Ruffner, "Climates of The States", National Oceanic and Atmospheric Administration, Vols. 1 and 2, Gale Research Company, 1978.
30. G. Besztercey and G. G. Karady, "A New Contamination Method For Clean Fog Tests of Composite Insulators", Conference record of the 1998 IEEE ISEI, pp. 365-368, Virginia, USA, June, 1998.
31. D. Klapas, R. Hackam and F. A. Benson, "Electric Arc Collection For High Speed Trains", Proc. IEEE, Vol. 64, pp. 1694-1715, 1976.
32. S. H. Kim, E. A. Chemey and R. Hackam, "The Loss and Recovery of Hydrophobicity of RTV Silicone Rubber Insulator Coatings", IEEE Trans. PD, Vol. 5, pp. 1491-1499, 1990.
33. R. S. Gorur, J. W. Chang and O. G. Amburgey", Surface Hydrophobicity of Polymers Used For Outdoor Insulators", IEEE Trans. PD. Vol. 5, pp. 1923-1933, 1990.
34. S. H. Kim, E. A. Chemey and R. Hackam, "Artificial Testing And Evaluation of RTV Coatings in a Salt-Fog Chamber", IEEE Trans. EI, Vol. 26, pp. 797-805, 1991.
35. K. Naito, K. Izumi, K. Takusu and R. Matsouka, "Performance of Composite Insulators Under Polluted Conditions", CIGRE 33-301, pp. 1-8, 1996.
36. R. Matsouka, K. Kondo, K. Naito and M. Ishii, "Influence of Non-Soluble Contaminants on the Flashover Voltages of Artificially Contaminated Insulators", IEEE Trans. PD, Vol. 11, pp. 420-425, 1996.
37. R. Matsouka, H. Shinokubo, K. Kondo, Y. Mizuno, K. Naito, T. Fujumura and T. Terada, "Assessment of Basic Contamination Withstand Voltage Characteristics of Polymer Insulators", IEEE Trans. PD, Vol. 11, pp. 1895-1900, 1996.
38. H. M. Schneider and A. E. Lux, "Mechanism of HVDC Wall Bushing Flashover In NonUniform Rain", IEEE Trans. PD, Vol. 6, pp. 448-453, 1991.
39. R. S. Gorur and T. Orbeck, "Surface Dielectric Behavior of Polymeric Insulation Under HV Outdoor Conditions", IEEE Trans. EI, Vol. 26, pp. 1064-1072, 1991.
40. W. A. Chisholm, K. G. Ringler, C. C. Erven, M. A. Green, O. Melo, Y. Tam, O. Nigol, J. Kuffel, A. Boyer, I. K. Pavasars, F. X. Macedo, J. K. Sabiston and R. B. Caputo, "The Cold-Fog Test", IEEE Trans. PD, Vol. 11, pp. 1874-1880, 1996.
41. H. Zhang and R. Hackam, "Surface Resistance And Hydrophobicity of HTV Silicone Rubber in The Presence of Salt-Fog", Conference record of the 1998 IEEE International Symposium on Electrical Insulation (ISEI), pp. 355-359, Washington DC, June, 1998.
42. H. Zhang and R. Hackam, "Electrical Surface Resistance, Hydrophobicity and Diffusion Phenomena in Polyvinyl Chloride", IEEE Trans. DEI, Vol. 6, pp. 73-83, 1999.
43. U. Kaltenborn, J. Kindersberger, R. Barsch and H. Jahn, "On the Electrical Performance of Different Insulating Materials in a Rotating-Wheel-Dip Test", Annual Report CEIDP, pp. 398-401, 1997.
44. H. Deng and R. Hackam, "Electrical Performance of RTV Silicon Rubber Coating of Different Thicknesses on Porcelain", IEEE Trans. PD, Vol. 12, pp. 857-866, 1997.
45. H. Deng, R. Hackam and E. A. Cherney, "Role of the Size of Particles of Alumina Trihydrate Filler on the Life of RTV Silicone Rubber Coating", IEEE Trans. PD, Vol. 10, pp. 1012-1024, 1995.
46. H. Deng, R. Hackam and E. A. Cherney, "Influence of Thickness, Substrate Type, Amount of Silicone Fluid and Solvent Type on the Electrical Performance of RTV Silicone Rubber Coatings", IEEE Trans. PD, Vol. 11, pp. 431-443, 1996.
47. H. Deng and R. Hackam, "Impact of Weather Conditions and Formulations on LMW Silicone Fluid Content in RTV Silicone Rubber Coatings", IEEE CEIDP, pp. 437-440, 1996.
48. H. Deng and R. Hackam, "Low Molecular Weight of Silicone Fluid in RTV Silicone Rubber Coatings", IEEE. Trans. DEI, Vol. 6, pp. 84-94, 1999.
49. Y. Mizuno, Y. Maekaua, K. Naito, K. Kondo, I. Nakajima and R. Matsuoka, "Time Variation of Hydrophobicity and Weight of Silicone Rubber Immersed In Water", IEE Japan, Vol. 117-A, pp. 299-304, 1997.