메뉴 건너뛰기




Volumn 46, Issue 1, 1999, Pages 72-86

A Concurrent Optimization Methodology for Concurrent Engineering

Author keywords

Concurrent engineering; Decision support system; Dynamic programming; Life cycle cost; Logistics engineering; Optimization

Indexed keywords

COST BENEFIT ANALYSIS; DECISION SUPPORT SYSTEMS; DECISION THEORY; DYNAMIC PROGRAMMING; LIFE CYCLE; MATHEMATICAL MODELS; PRODUCT DESIGN; SERVICE LIFE;

EID: 0033079793     PISSN: 00189391     EISSN: None     Source Type: Journal    
DOI: 10.1109/17.740039     Document Type: Article
Times cited : (19)

References (33)
  • 1
    • 33747249376 scopus 로고    scopus 로고
    • Air Force Maintenance Munitions and Supply Management Engineering Team
    • 4.1," Wright-Patterson Air Force Base, OH,1982.
    • Air Force Maintenance Munitions and Supply Management Engineering Team, "Logistics composite model, user's guide version4.1," Wright-Patterson Air Force Base, OH,1982.
    • "Logistics Composite Model, User's Guide Version
  • 3
    • 0020203624 scopus 로고    scopus 로고
    • "On optimal replacement policies,"
    • vol. 28,no. 1
    • D. Assaf and B. Levikson, "On optimal replacement policies," Manag. Sci.,vol. 28,no. 11, pp. 439-452,1982.
    • Manag. Sci. , pp. 439-452
    • Assaf, D.1    Levikson, B.2
  • 4
    • 84985765902 scopus 로고    scopus 로고
    • "Multiattribute decision making with inexact value-function assessment,"
    • vol. 21,no. 2,pp. 318-336,1990.
    • R. D. Badinelli and J. R. Baker, "Multiattribute decision making with inexact value-function assessment," Decision Sci.,vol. 21,no. 2,pp. 318-336,1990.
    • Decision Sci.
    • Badinelli, R.D.1    Baker, J.R.2
  • 7
    • 0021436204 scopus 로고    scopus 로고
    • "A preventive replacement policy for units subject to intermittent demand,"
    • vol. 32,no. 3,pp. 584-595,1984.
    • M. Berg, "A preventive replacement policy for units subject to intermittent demand," Oper. Res., vol. 32,no. 3,pp. 584-595,1984.
    • Oper. Res.
    • Berg, M.1
  • 8
    • 0342282440 scopus 로고    scopus 로고
    • "Using simulation to solve design and operational problems,"
    • vol. 10,no. 9,pp. 89-105,1990.
    • K. Chaharbaghi, "Using simulation to solve design and operational problems," Int. J. Oper. Production Manag.,vol. 10,no. 9,pp. 89-105,1990.
    • Int. J. Oper. Production Manag.
    • Chaharbaghi, K.1
  • 10
    • 0005661138 scopus 로고    scopus 로고
    • "An informal survey of multi-echelon inventory theory,"
    • vol. 19,no. 4,pp. 621-649,1972.
    • A. Clark, "An informal survey of multi-echelon inventory theory," Naval Res. Logistics Quart.,vol. 19,no. 4,pp. 621-649,1972.
    • Naval Res. Logistics Quart.
    • Clark, A.1
  • 11
    • 33747271884 scopus 로고    scopus 로고
    • "Integrated weapon system program management,"
    • 63-107, Aug.1994.
    • Department of the Air Force, "Integrated weapon system program management," Air Force Instruction63-107, Aug.1994.
    • Air Force Instruction
  • 13
    • 0030193478 scopus 로고    scopus 로고
    • "An organization ontology for enterprise modeling: Preliminary concepts for linking structure and behavior,"
    • vol. 29,pp. 123-134, July1996.
    • M. S. Fox, M. Barbuceanu, and M. Gruninger, "An organization ontology for enterprise modeling: Preliminary concepts for linking structure and behavior," Comput. Ind.,vol. 29,pp. 123-134, July1996.
    • Comput. Ind.
    • Fox, M.S.1    Barbuceanu, M.2    Gruninger, M.3
  • 14
    • 0021484181 scopus 로고    scopus 로고
    • "What does 'product quality' really mean?,"
    • vol. 26,no. 1,pp. 25-43,1984.
    • D. Garvin, "What does 'product quality' really mean?," Sloan Manag. Rev.,vol. 26,no. 1,pp. 25-43,1984.
    • Sloan Manag. Rev.
    • Garvin, D.1
  • 15
    • 0345728127 scopus 로고    scopus 로고
    • "Assessment of aircraft logistics planning models,"
    • vol. 9,no. 1,pp. 59-69,1981.
    • M. A. Geisler and B. L. Murrie, "Assessment of aircraft logistics planning models," Omega,vol. 9,no. 1,pp. 59-69,1981.
    • Omega
    • Geisler, M.A.1    Murrie, B.L.2
  • 16
    • 0018014639 scopus 로고    scopus 로고
    • "Spares provisioning for repairable items: Cyclic queues in light traffic,"
    • vol. 10,no. 3,pp. 307-314,1978.
    • D. Gross and J. F. Ince, "Spares provisioning for repairable items: Cyclic queues in light traffic," AUE Trans.,vol. 10,no. 3,pp. 307-314,1978.
    • AUE Trans.
    • Gross, D.1    Ince, J.F.2
  • 19
    • 0041511475 scopus 로고    scopus 로고
    • "An overview on available models and techniques for the multi-criteria reliability problem with emphasis on a potential use in a DSS for this problem type,"
    • vol. 16,pp. 413-424,1988.
    • P. Jedrezejowicz, "An overview on available models and techniques for the multi-criteria reliability problem with emphasis on a potential use in a DSS for this problem type," Ann. Oper. Res.,vol. 16,pp. 413-424,1988.
    • Ann. Oper. Res.
    • Jedrezejowicz, P.1
  • 20
    • 0022160716 scopus 로고    scopus 로고
    • "An optimum multiechelon repair policy and stockage model,"
    • vol. 32,no. 4,pp. 551-566,1985.
    • A. Kaplan and D. Orr, "An optimum multiechelon repair policy and stockage model," Naval Res. Logistics Quart.,vol. 32,no. 4,pp. 551-566,1985.
    • Naval Res. Logistics Quart.
    • Kaplan, A.1    Orr, D.2
  • 21
    • 3843142536 scopus 로고    scopus 로고
    • "The JIT spiral of continuous improvement,"
    • vol. 89,no. 4,pp. 10-13,1989.
    • R. Lea and B. Parker, "The JIT spiral of continuous improvement," Ind. Manag. Data Syst.,vol. 89,no. 4,pp. 10-13,1989.
    • Ind. Manag. Data Syst.
    • Lea, R.1    Parker, B.2
  • 22
    • 0015723595 scopus 로고    scopus 로고
    • "Optimal reliability design of a system: A new look,"
    • 22,no. 3,pp. 255-258,1973.
    • B. Misra and M. D. Ljubojevic, "Optimal reliability design of a system: A new look," IEEE Trans. Reliability, vol. R-22,no. 3,pp. 255-258,1973.
    • IEEE Trans. Reliability, Vol. R
    • Misra, B.1    Ljubojevic, M.D.2
  • 23
    • 0000218363 scopus 로고    scopus 로고
    • "Optimal reliability choice in product design,"
    • vol. 15,no. 4,pp. 281-294,1990.
    • D. Murthy, "Optimal reliability choice in product design," Eng. Optimization,vol. 15,no. 4,pp. 281-294,1990.
    • Eng. Optimization
    • Murthy, D.1
  • 24
    • 84986847074 scopus 로고    scopus 로고
    • "Concurrent engineering with early supplier involvement: A cross-functional challenge,"
    • vol. 29,no. 2,pp. 3-9, Spring1993.
    • C. O'Neal, "Concurrent engineering with early supplier involvement: A cross-functional challenge," Int. J. Purchasing and Materials Manag.,vol. 29,no. 2,pp. 3-9, Spring1993.
    • Int. J. Purchasing and Materials Manag.
    • O'Neal, C.1
  • 25
    • 0030149936 scopus 로고    scopus 로고
    • "Multiobjective concurrent engineering: A goal programming approach,"
    • vol. 43,pp. 202-209, May1996.
    • M. Schniederjans and S. Hong, "Multiobjective concurrent engineering: A goal programming approach," IEEE Trans. Eng. Manage.,vol. 43,pp. 202-209, May1996.
    • IEEE Trans. Eng. Manage.
    • Schniederjans, M.1    Hong, S.2
  • 26
    • 0002765931 scopus 로고    scopus 로고
    • "Models for managing the redesign and manufacture of product sets,"
    • vol. 3,no. 2,pp. 85-104,1990.
    • G. Shirley, "Models for managing the redesign and manufacture of product sets," J. Manufacturing and Manag.,vol. 3,no. 2,pp. 85-104,1990.
    • J. Manufacturing and Manag.
    • Shirley, G.1
  • 27
    • 0030211555 scopus 로고    scopus 로고
    • "An intelligent-agent framework for concurrent product design and planning,"
    • vol. 43,pp. 297-306, Aug.1996.
    • G. W. Tan, C. C. Hayes, and M. Shaw, "An intelligent-agent framework for concurrent product design and planning," IEEE Trans. Eng. Manage.,vol. 43,pp. 297-306, Aug.1996.
    • IEEE Trans. Eng. Manage.
    • Tan, G.W.1    Hayes, C.C.2    Shaw, M.3
  • 28
  • 29
    • 0022805685 scopus 로고    scopus 로고
    • "Optimal replacement for fault-tolerant systems,"
    • vol. 33,no. 4,pp. 747-757,1986.
    • B. Taylor and B. E. Rodriguez, "Optimal replacement for fault-tolerant systems," Naval Res. Logistics Quart.,vol. 33,no. 4,pp. 747-757,1986.
    • Naval Res. Logistics Quart.
    • Taylor, B.1    Rodriguez, B.E.2
  • 30
    • 33747316892 scopus 로고    scopus 로고
    • "Manufacturing by design,"
    • vol. 66,no. 4,pp. 83-91, July-Aug.1988.
    • D. E. Whitney, "Manufacturing by design," Harvard Bus. Rev.,vol. 66,no. 4,pp. 83-91, July-Aug.1988.
    • Harvard Bus. Rev.
    • Whitney, D.E.1
  • 31
    • 0001110621 scopus 로고    scopus 로고
    • "Concurrent subspace optimization using design variables sharing in a distributed computing environment,"
    • vol. 4,no. 4,pp. 361-377, Dec.1996.
    • B. Wujek, J. Renaud, S. Batill, and J. Brockman, "Concurrent subspace optimization using design variables sharing in a distributed computing environment," Concurrent Eng.,vol. 4,no. 4,pp. 361-377, Dec.1996.
    • Concurrent Eng.
    • Wujek, B.1    Renaud, J.2    Batill, S.3    Brockman, J.4
  • 33
    • 0000929350 scopus 로고    scopus 로고
    • "Product design based on concurrent processing of design and manufacturing information by utility analysis,"
    • vol. 4,no. 4,pp. 379-387, Dec.1996.
    • M. Yoshimura and H. Kondo, "Product design based on concurrent processing of design and manufacturing information by utility analysis," Concurrent Eng.,vol. 4,no. 4,pp. 379-387, Dec.1996.
    • Concurrent Eng.
    • Yoshimura, M.1    Kondo, H.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.